ReviewsCadillac Water Pump Pulley Pullers

ABN Water Pump Sprocket Retainer Tool - Full-Circle Sprocket Holding Tool Compatible with 2.2L GM Vauxhall Opel

  • [Protect Your Vehicle from Engine Damage] Secure the water pump sprocket with the ABN Water Pump Sprocket Holder to prevent engine vibration and....
  • [Ensure Easy Maintenance] Remove the access plate then line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to....
  • [Fits Your Vehicle] Water pump sprocket retainer holding tool is compatible with 2.2L Ecotec motors found in GM, Vauxhall, and OPEL vehicles.
  • [Built to Last] Heavy-duty steel provides maximum strength and durability while the black-oxide finish resists corrosion.
  • [Package Contents] Each water pump pulley holder tool includes (1) water pump holding tool and (3) 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

Raw Sea Water Pump for Mercruiser Marine 4.3 5.0 5.7 8.1 L Belt Driven Impeller Engine Cooling

  • Replaces 46-8M0137216, 46-8m0122655, 46-8M0118067, 46-862914T10 & 46-862914T3.
  • impeller is installed and pump is ready to be bolted on..
  • Pulley is not included, must re-use your old pulley.
  • Fits: MCM/MIE 4.3L MPI, 5.0L MPI, 5.7L MPI (350 MAG MPI & MX), 6.2L MPI with ECM 555.
Check Stock

OTC 1180 10-Ton Capacity Push Puller Set

  • 3 popular OTC bar-type pullers in one versatile set, all packed in a handy plastic storage case.
  • permits damage-free pulling of gears, bearings,....
  • Ideal for servicing heavy-duty trucks, off-road construction equipment, and machinery.
  • Set consists of a No. 927 10-ton push-puller with 6-3/4 inch puller legs, an 8-3/8 inch reach and a 2-1/8 to 7-1/4 inch spread.
  • No. 522 Gear and Pulley Puller has a spread range of 2 inches to 7-3/4 inches when used with 1/2 inch cap screws (cap screws not included).
  • No. 7393 Gear and Pulley Puller includes 5-1/2 inch long and 13 inch long forcing screws and two 3/8-16 x 3 inch long hex head cap screws.
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

Spectre Performance - SPE-4480 Water Pump Pulley Shim Kit

  • Use between the water pump flange and the pulley to space the pulley outwards for proper belt alignment.
  • Kit includes 3-1/16 inch shims for thickness totals of 1/16 inch, 1/8 inch and 3/16 inch.
  • Easy to install with no special tools or skills required.
Check Stock

TOYAN FS-L400 14cc Inline Four-Cylinder Four-Stroke Water-Cooled Nitro Engine Model DIY Assembly Kit for 1:8 1:10 1:12 1:14 RC Model Car Ship Airplane - KIT Version

  • Integrated Crank Shaft: It utilizes a 180-degree crankshaft. The ignition timing sequence of 1342 for running smoother and more sensitive acceleration response. The maximum speed is 13,500 RPM..
  • Double Synchronous Pulley: The timing structure of the dual synchronous pulley reduces the risk of gear jumping during high-speed operation. / Precision Rocker Arm: Alloy rocker arm and independent intake and exhaust design for more accurate valve switch..
  • Built-in Mechanical Pump Water-Cooled Kit: The power of the pump body comes from the crankshaft, and the pump body provides circulating power to the coolant. Later, it can cooperate with the cooling fan to enhance the self-cooling performance / Precision Carburetor: Independent four carburetors for more accurate tuning, more sensitive throttle response, and working more stable.
  • High Precision Gear Pump: High-speed structure design & corrosion-resistant material manufacturing. Large flow water pump provides powerful cooling capacity. / Lightweight: It can be better compatible with the RC model and improve the unit power output ratio.
  • Starter Kit: The engine comes with an electric starter kit, providing users with all new fun..
Check Stock

MUKCHAP 4 PCS Fan Clutch Wrench, 32mm Automotive Cooling Fan Clutch Nut Wrench & Water Pump Holder Removal Tool Kit for BMW Ford and More

  • The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
  • The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
  • Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
  • Use included bolts and cover bolts to install the tool.
  • Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
  • The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.
Check Stock

March Performance 7015 Performance Ratio Clear Powder Coated Billet Aluminum V-Belt Pulleys - Set of 3

  • Set includes: One double-groove crank pulley 5-1/2" diameter, one single V-groove water pump pulley 6-1/4" diameter and one single V-groove alternator pulley with cover 2-11/16" diameter.
  • Clear powder coated finish to eliminate polishing in hard-to-reach places.
  • Replaces the low performance V-belts and eliminates belt throwing.
  • Reduces accessory drag and provides an increase of 12-15 horsepower at rear wheels.
Check Stock

VIVOHOME Electric 620W 9000GPH Submersible Water Pump with Heavy Duty Ceiling Mount Bicycle Kayak Canoe Garage Storage Rack Lift Hoists Pulley System

  • PACKAGE INCLUDES - 1* Electric 620W 9000GPH Submersible Water Pump for Koi Pond Pool Waterfall Fountains Fish Tank and Aquarium.
  • 1* Heavy Duty Ceiling Mount Bicycle Kayak Canoe Garage Storage Rack Lift Hoists Pulley System 125lbs Capacity Pack of 2.
  • PROFESSIONAL PUMP - VIVOHOME high-pressure water pump equipped with hefty impellers could bring great powerful water flow with a low power consumption.
  • It is designed for multiple applications including koi/fish ponds, water gardens, fountains, aquariums, waterfalls, statuary hydroponic, irrigation systems and water features.
  • It can function properly when submerged underwater and also can be used terrestrially, but long-time terrestrial use is NOT recommended.
  • EASY INSTALLATION - Designed with an innovative pulley system, you can mount or hang kayaks, tires, bicycles, ladders, or any other bulky items to the ceiling with ease.
  • Just hook up your kayak and pull the rope to lift and lock.
  • Only a few simple tools are needed and you’ll raise and lower whatever you need in no time.
  • DIRECTION ADJUSTABLE - The water outlet direction can be adjusted to 5 positions to meet different water spraying needs.
  • Output valve fits adapter that fit 2" (Inner Diameter) tubing and lift height can be....
Check Stock

VIVOHOME Electric 310W 5300GPH Submersible Water Pump with Heavy Duty Ceiling Mount Bicycle Kayak Canoe Garage Storage Rack Lift Hoists Pulley System

  • PACKAGE INCLUDES - 1* Electric 310W 5300GPH Submersible Water Pump for Koi Pond Pool Waterfall Fountains Fish Tank and Aquarium.
  • 1* Heavy Duty Ceiling Mount Bicycle Kayak Canoe Garage Storage Rack Lift Hoists Pulley System 125lbs Capacity Pack of 2.
  • PROFESSIONAL PUMP - VIVOHOME high-pressure water pump equipped with hefty impellers could bring great powerful water flow with a low power consumption.
  • It is designed for multiple applications including koi/fish ponds, water gardens, fountains, aquariums, waterfalls, statuary hydroponic, irrigation systems and water features.
  • It can function properly when submerged underwater and also can be used terrestrially, but long-time terrestrial use is NOT recommended.
  • EASY INSTALLATION - Designed with an innovative pulley system, you can mount or hang kayaks, tires, bicycles, ladders, or any other bulky items to the ceiling with ease.
  • Just hook up your kayak and pull the rope to lift and lock.
  • Only a few simple tools are needed and you’ll raise and lower whatever you need in no time.
  • DIRECTION ADJUSTABLE - The water outlet direction can be adjusted to 5 positions to meet different water spraying needs.
  • Output valve fits 2 adapters that fit 1-1/4" and 1-1/2" ID (Inner Diameter) tubing a....
Check Stock

AJP Distributors JDM Upgrade Light Weight Aluminum Under Drive Crank Shaft Crankshaft Alternator Pulley Wheel Kit Red Compatible/Replacement For Impreza Wrx 2.0L 2.5L EJ20 EJ25 Turbo Engine

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 3, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock