ReviewsCam For Stock Twin Cam 88

Lunati 10120702LK Voodoo 219/227 Hydraulic Flat Cam/Lifter Kit for 262-400 Chevrolet Small Block

Performance street cam with excellent drivability. Great replacement for muscle car cams with auto trans. Stock exhaust manifolds and dual plane intake with mild 4 bbl carb. 4X4 and performance marine cam with dry exhaust..
219/227 Duration at .050". 112 Degree Lobe Separation Angle. 0.468"/0.489" Valve Lift.
Lunati Cam and Lifter Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
More Power Where It Matters - Lunati's Voodoo cams deliver more area under the curve than any other camshaft series..

Fitment： M8 Locking Tool fits for Harley 2017-UP MILWAUKEE 8(M8) Engine..
Function: M8 cam Locking Tool can allows you to easily lock the camshaft and crankshaft sprockets to properly remove, replace and torque the sprocket bolts..
Material: M8 Locking Tool made from urethane elastomer with high tear and impact properties..
Tips: The side with the notch faces down toward the crank gear. It’s a tight fiting, you will need to move the upper sprocket slightly until it matches up. Helps make the cam change very simple..

SOHC - Mutha' Thumpr NSR (NO SPRINGS REQUIRED): Very rough idle, biggest cam for stock heads. Great power above 4900 rpm. Compatible with stock valve springs, benefits from converter and gears, requires cam phaser upgrade and custom tuning..
273/306 Advertised Duration, 234/254 Duration @ .050 inch, .450 inch/.450 inch Lift, 109 Lobe Separation.
Part #26113-24 valve springs available but not required.
Steel retainer part #710-24 and titanium retainer part #702-24 also available.

1. Compatible with all tc88,96,103 and 110s that use the b148 or the b168 bearings.
2. Remove and install the inner cam bearing on the new and old models of double cam and dyna harley.
3.The design of the kit makes installation easier.
4.The "T" pin included in the kit makes it easier to insert and remove from the collet.

Allows you to tighten, tension, connect and secure heavy loads by simply pulling your rope or cord through the cam mechanism.
Easy to adjust and release tension by rotating the cam lock lever.
Includes 1 x CamJam XT and 1 x 16' (4.88m) section of 550 paracord.
Two attachment methods for ultimate versatility - Loop System and Fixed End System.
Achieve and maintain high tension without knots.

Measurement of cam and pinion gears is especially critical for 90 and later models to verify proper fit..
Crisp throttle response and strong pulling power from 1500 to 6000 RPM.
Excellent cam for heavy touring bikes and high geared bikes.

Brian Tooley Camshaft, BTR Platinum dual springs with Steel Retainers, and 7.400 Chromoly Pushrods..
Cam specs are Specs: 226/231 .610"/.608" 113+4 and comes a 3 bolt timing gear pattern..
When you need a little more RPM than the stage 1 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching Steel Retainers (faster reving than steel), Locators for stock guides, locks and seals..
Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..

Product 1: Pocket-sized dash camera goes virtually unnoticed on your windshield.
automatically records and saves video of incidents with GPS location, date and time.
Product 1: Extra-wide 180-degree lens captures more of the environment, and records 1440p HD video with Garmin Clarity HDR optics for crisp detail day and night.
Product 1: Voice control (only available in English, German, French, Spanish, Italian and Swedish) lets you use spoken commands to save video, start/stop audio recording, take still pictures and more.
Product 1: Saved videos automatically upload via Wi-Fi connection to the secure online Vault to view and share later.
Product 2: Keep your Dash Cam powered on while your vehicle is turned off.
Product 2: Monitor motion detected in front of your vehicle.
Product 2: Compatible with the following Garmin Dash cams: Dash Cam 45, Dash Cam 46, Dash Cam 47, Dash Cam 55, Dash Cam 56, Dash Cam 57, Dash Cam 65W, Dash Cam 66W, Dash Cam 67W, Dash Cam Mini, Dash Cam Mini 2, and Dash Cam Tandem.

【Application】for Chevy G/M LS Engine, LS1, LS2,LS3,LS6, LQ9.
【Cam Bearing Installation Tool】This tool is used to remove and install cam bearings. Professsional cam bearing tool for all LS based engines. This tool is a must when installing cam bearings in big block for Chevys..
【Note】This is a must have for the LS engine builder, you can save time and money by installing your own cam bearings..
【Using Our Cam Bearing Installation Tool】You can remove the old cam bearing and install the new cam bearing like a professional. Easy to install, which helps to keep the cam bearing in the correct position.
【Durable】Made of 45# steel ,maximum durability, the total length is 33 inches, and the end is detachable..