ReviewsCam Wheel Shaft

SCOTTCHEN Airway Buffing Wheel Extension Shaft 2-1/4 L Angle Grinder Buff Extender Kit 5/8 -11 Threads Arbor Extended Adapter Steel - 1set

  • 【Application】This 5/8" Shank Cotton Buffing Polishing Wheel Extender suitable for Angle Grinder with 5/8"-11 threads mandrel and fit for polish....
  • 【Function】This 5/8" Buffing Wheel shaft extender is used for extend the mandrel length then can fit thicker buffing wheels /airway buffing wheels,....
  • 【High Quality】This 5/8" Buffing Wheel extension’s screw shaft and washer are made of firmness steel, the threads tube is made of aluminum, which....
  • 【Excellent Effect】This buffing adapter is good effect to extend the shaft length of angle grinder and make your buffing work more easy and....
  • 【Dimension】Threaded shaft dia x L: 5/8” x 1-7/8”, threaded tube ID x OD x L: 9/16” x 15/16” x 2-1/4”, Washer dia x thickness: 1-5/16”....
Check Stock

HOBART Worm Wheel with Bushing Assembly 00-124751-3

  • 1. This brass gear shaft kit is made of high quality brass, which is strong and durable and has a long service life..
  • 2. The rotating structure of the brass gear shaft is simple and compact, small in size and light in weight..
  • 3. Sizes of gears: 12x16x4mm/0.47x0.63x0.12inch (H x OD x ID).
  • Sizes of gear shafts: 20x11.7x6mm/0.79x0.46x0.24inch (H x OD x ID).
  • 4. The set include one 0.5 modulus 6mm hole dia brass gear shaft and one 30T brass gear wheel..
  • 5. Package includes: 1x Brass Wheel, 1x Brass Gear Shaft, 2x Screws..
Check Stock

ACDelco Gold 17800B Bonded Rear Drum Brake Shoe Set

  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Non-directional brake surface finish for consistent braking.
  • All shoes are machined for correct shoe-to-drum contact.
  • Highest shear strength for the best bond integrity.
  • Contour or cam ground to eliminate chatter and rear wheel lockup.
  • Rust-preventative coating provides corrosion protection for superior durability.
Check Stock

Rear Brake Master Cylinder & Caliper Replacement for Chinese Dirt Pit Bike Baja SSR 70cc - 200cc with 12mm Wheel Shaft

  • Fit for 12mm Rear Wheel Shaft, NOT fit 15mm Rear Wheel Shaft Bikes..
  • Complete rear brake master cylinder caliper assembly with brake fluid and brake pad installed..
  • The brake comes with 1 pair of free extra brake pad..
  • For 70CC 90CC 110CC 125CC 140CC 200CC dirt bikes, pit bikes with 12mm rear wheel shaft..
  • Please take measurements and confirm before purchasing. Banjo Bolt Size: M10X1.25 (Thread diameter: 10mm, pitch: 1.25mm).
Check Stock

Keson RR318N Contractor Grade Measuring Wheel, Ft. & In., Ft. & In., 12-1/2-Inch Diameter, Orange, Large - Circumference: 3 ft

  • Pistol Grip Handle increases control and comfort.
  • Quick Snap Cam Locks to store and transport the wheel with minimal effort.
  • Telescopes down to 23 inches cam locks make the unit simple to operate when preparing for storage.
  • Flip-Down Kickstand keeps the wheel upright when you need your hands free to perform other tasks.
  • Easy-to-read, Magnified Counter 5-digit, easy-read, magnified counter measures 9,999 feet, 11 inches..
  • Heavy-duty, 3-foot, precision-molded plastic wheel takes years of field abuse.
  • Five-digit easy-read magnified counter (9,999 feet) subtracts in reverse.
  • Measures almost two miles without resetting.
  • Curved, telescoping handle adjusts to comfort level.
  • Time-proven designs with more than a dozen years of continuous improvement.
Check Stock

The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle

  • The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

3" Multipurpose Mini Bench Grinder Polisher with 31" Long Flexible Shaft and Accessories, Variable Speed Dial 0-10000 RPM, 110V 150W Single Phase Motor

  • 150W 3 inch Mini Bench Grinder Polisher 110V 60Hz high-speed single phase motor, speed control range 0-10,000 RPM.
  • The mini bench grinder is with a 31" flexible long-arm flex shaft to work in hard-to-reach surfaces..
  • Flex shaft collet size: 1/8", wheel arbor size: 10mm/0.39".
  • This powerful and portable 3" mini polisher is with variable speed control for buffing,grinding, deburring and fine carving.
  • You will get 1 pc mini bench grinder, 31" flex shaft , 3" grinding wheel, 3"fiber polishing wheel, necessary tools and manual..
Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

  • Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
  • Designed for use with slow speed 8 inch bench type grinders.
  • Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
  • Use with High Speed Steel (HSS)Tools Only.
  • Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..
Check Stock

Amerbm Camshaft Crankshaft Alignment Timing Locking Tool Engine Timing Belt Tool Compatible with Volvo Models 850 960 S40 S70 and S90

  • Application: Camshaft locking tool set compatible for Volvo 850, 960, S40, S70, S90 is designed for alignment of the cam and crankshafts on Volvo vehicles..
  • Vehicle Service Type: 700, 800, 850, 900, 960, C70 Coupe and Conv, S40, S60, S70, S80, S90, V70-2000, V70XC, XC70, V90, XC90..
  • Models: S80 (07-), V70 (08-), S80 (-06), XC90, V70 (00-08), V70 XC (01-) / XC70 (-07), S60, C30, C70 (06-), S40 (04-), V50, S40 (-04), V40, 850, C70 Coupe (-02), C70 Conv (-05), S70, V70 (-00), V70 XC (-00), 960, S90, V90..
  • Easy to use: It allows you to correct install camshafts with a cam cover and will hold down the valve cover/cam shaft bearings so all those little bolts can be torqued down properly..
  • Function: Master Set designed to properly Secure and Align cylinder head, cam and crankshaft during Removal and Installation of cylinder head assemblies on 4, 5 and 6 cyl engines..
Check Stock

vanpro DIY Electric Skateboard Brushless Motor Mount Bracket /80MM 90MM 97MM 100MM Pulley Wheel KIT Belt 5M

  • Please note that it is only suitable for square truck rods..
  • The aperture of the small synchronizing wheel: 8MM/0.315 IN (please confirm whether the diameter of the motor shaft is 8MM)..
  • Please confirm whether the hole pattern of the PU wheel is suitable, the cruiser flywheel, diameter: 83/90/97/100MM, width: 52MM. 6 rectangular wheel....
  • only suitable for 50 series (5065) brushless motor, hole-fixing spacing of flat screws on motor shaft end: Φ30.0* 30.0..
  • 5M HTD Belt, width: 10MM, circumference: 255MM, pulley wheel ratio: 36/12 5M HTD..
Check Stock

Pearl P3002C Inch Bass Drum Pedal

  • ULTRA-LIGHT WEIGHT CHAIN:The Power Chain features low-friction rollers for speed and double chain construction for power and dependability.
  • LINEAR CAM:The Perfect Circle Cam provides consistent and smooth feel throughout the entire stroke for pinpointaccuracy and superb control.
  • NINJA BEARINGS:Designed for skateboarding these bearings feature micro-polished steel balls for amazing low friction.
  • DUO-DECK FOOTBOARD: Converts quickly from shortboard to longboard via 4 screws under footplate. For your choice of feel.
  • Z LINK DRIVE SHAFT: Adjustable machined Aluminum for perfect positioning and backlash-free energy transference for precise feel.
Check Stock