ReviewsCamera Flash Shoe Mounts

Neewer Two(2) Pack of Durable Pro 1/4\ Mount Adapter for Tripod Screw to Flash Hot Shoe

This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted..
It can install NIKON SC-28 Flash Sync Cord to VH2000 Camera Flash Bracket Grip. It can install YONGNUO CTR-301P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket..
2 pack of 1/4" tripod screw to flash shoe mount adapter.

Check Stock

Opteka BC-10 Universal Double-Sided 7.5 X 4-Inch Bounce Card for External Camera Flashes

DEDICATED - The Digitalmate 130N dedicated flash is a flash unit that fits into your camera's hot shoe. The dedicated flash is a great piece of gear that communicates with the camera. A dedicated flash is a far better tool than the built-in flash because of the versatility it gives you..
AUTOFOCUS - The Digitalmate flash provides an independent AF assist. When a flash is mounted to the camera, the AF Assist option is enabled. The normal AF Assist light will not be used, instead the flashes autofocus assist system will take effect..
TTL - The flash and ambient light are reflected by the subject through the camera lens and then metered by the camera's TTL metering system. The flash power is adjusted accordingly. A digital camera TTL flash system, often known as E-TTL, involves firing a pre-flash before the actual exposure.
QUICK SPECS - Full TTL dedication, Backlit LCD screen, Guide number: 130 ft. (40m), Power save mode, Auto temperature control (overheat protection), Fine brightness control, Metal hot shoe, Rapid recycle time (0.2-6 seconds), Works on 2 AA batteries, Memory function (retains previous setting after restart).
COMPATIBILITY - NEX 3, NEX 3N, NEX 5, NEX 5T, NEX 5R, NEX 6, NEX 7, A5000, A5100, A6000, A6100, A6300, A6500, A9 APS-C Digital SLR C....

Check Stock

Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite (Hot Shoe Flash Stand)

Universal Camera Hot Shoe Flash Stand for dslr camera,Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
Package includes 2pcs of camera hot shoe flash stands. Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..

Check Stock

Cold Shoe Mount, Adapter, Extension - Metal 3 Shoe Mount Video Accessories, Camera Flash Brackets for Led Lights, Microphones, Monitors, Audio Recorder, Video Cameras

✔️ Features 3 shoe mounts in durable aluminum alloy construction, Compact and lightweight.
✔️ Connects via Shoe Mount or 1/4"-20 Mount.
✔️ Built-In Backstops for Secure Mounting.
✔️ Allows the use of multiple shoe mount accessories at the same time, Compatible with lights flash and microphone with standard shoe mounts recorders, With 3 Standard Shoe Mounts ,You can install both lED video light and microphone on them. A fantastic tool for who need take higher Quality Photos or Videos close to professional level..

Check Stock

1/4\ Hot Shoe Adapter Mount Camera Shoe Mount Screw Flash Cold Shoe Mount to Tripod Screw Adapter DSLR Camera Rig-4 Packs

【WIDELY USED】It is ideal for attaching zoom recorder, camcorder, microphones, digital camera,sports video cam(Gopro), DSLR camera rig, LCD monitor, DV monitor, led lights, flash lights,DJI Osmo,smart phone and more..
【COMBO FLASH SHOE MOUNT】This durable pro 1/4 inch hot shoe adapter allow any devices with standard 1/4" screw hole to be installed on a flash hot shoe slot. It includes 2 nuts which can be adjusted.The bottom plate fits securely into dslr/slr camera's hot shoe and screws down tightly. The top bolt then fits into the tripod hole at the rear of the digital recorder and also screws down tightly..
【EASY TO INSTALL】Tightening knobs opens at a max of 22mm to the point of the angle, fits into any dslr rigs with a shoe plate..
【1/4" SCREW ADAPTER 】To mount your microphone, LED light, monitor to DSLR, camcorder or digital camera, or adapt anything else that has a 1/4-20 receptacle..
【STABLE AND RUSTPROOF】Material : Aluminum Alloy. Package includes- 4x hot shoe adapter..

Check Stock

UURig R005 Camera Hot Shoe Top Handle Grip, Universal Video Stabilizing Rig W 3 Cold Shoe Adapters for Sony A7III to Mount Microphone, LED Light, Monitor, Easy Low Angle Shots Metal

✔[Easy mounting] - The top handle grip could be mounted on camera hot shoe port directly, firmly and easily tightened by screw knob.
could be widely used with cameras hot shoe, applicable for Sony, Canon, Nikon, Olympus, Lumix, Pentax DSLR etc. Perfect for professional and amateur photographer, videographer, filmmaker to do handheld video/filming moving footage creation..
✔[Solid and simple structure] - The cheese handle is made of Aluminum alloy, sturdy, durable but lightweight. Helps with camera stabilization even without gimbal stabilizer..
✔[Integrated 3 cold shoe extension mounts] - To add monitor, microphone, video light, flash, mic receiver or other accessories etc. Cold shoe mount adapters with dislocation design to avoid interference..
✔[Richer mounting options] - Plenty of 1/4" 3/8" screw mount for DIY mounting options. Allows doing low angle and various angles shots easily. You can mount the grip towards forwards or the back..
✔[Ergonomic design] - Comfortable for handle hold and easy to carry around..

Check Stock

Neewer Vision 4 Outdoor Studio Flash Strobe Kit - Li-ion Battery Powered, 700 Full Power Flashes with 2.4G System (Trigger included), Bowens Mount, 3.96 Pounds with White Umbrella and 60x90cm Softbox

...contrast light over a relatively large area.
PERFECT STROBE LIGHTING KIT: Such a strobe lighting kit can help you achieve much more perfect effect when you are shooting, brings you more conveniences and amazing shooting experiences.
Compatible with Canon Nikon Panasonic Olympus Pentax with Standard Hot Shoe and Sony Camera with New Mi Hot Shoe like Sony A7 A7S/A7SII A7II A6000 A6300 A6500.

Check Stock

Optical Flash Slave Trigger JJC Hot Shoe Sync Adapter with PC Socket,Optical Sensor & 1/4 -20 Threaded Socket Cold Shoe for All Flashes Speedlight with Standard ISO 518 Hot Shoe-1 Pack

The flash standard hot shoe on the top is perfectly fit for off-camera flash, microphone, studio light other equipment or devices with standard ISO....
Optical Sensor: Optical flash slave trigger for lag-free firing of a second flash unit. For shoe-mount flash units-no cord required.
The PC female outlet on the side, enabling you to trigger flash mounted onto the upper hot shoe and additional flash or studio light (A sync cable is....
The standard cold shoe on the bottom is compatible with DSLR, mirrorless digital camera, camcorder and other cameras with standard hot shoe.
The 1/4"-20 Tripod Socket can be mounted onto a tripod with a 1/4"-20 male screw. And the lock nut helps you mount the devices tightly.

Check Stock

Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax 4 Pack

Universal Camera Hot Shoe Flash Stand for dslr camera, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
Package includes 4pcs of camera hot shoe flash stands.Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..

Check Stock

PHOLSY Off-Camera TTL Flash Sync Cord for Olympus/Panasonic Cameras - 6.5' (2 m) Replaces Olympus FL-CB05

✔ Compatible with olympus/panasonic TTL and maintains full TTL connection, 6.5' (2 m) coiled cord.
✔ Mounts to flash shoe , mounts to 1/4"-20 threaded studs, the cord comes with a cold shoe locking ring and light stand lug for use with other lighting accessories.
✔ Reduce harsh shadows, the flash cord is ideal for use in a secure, studio environment or on-location shoots.
✔ Best photo uses: portraiture, studio, wedding photography, on location shoots, and more.

Check Stock

Flash TTL Cord JJC Off-Camera Flash Hot Shoe Cord for Canon R5 R6 RP R T8i T7 T7i T6 T6i T6s T5 T5i SL3 SL2 90D 80D 77D 6D Mark II 5D Mark IV M50 M6,etc Replaces Canon OC-E3 Cord -1.3m

Compatibility: The TTL Cord for Canon for Canon R5 R6 RP R T8i T7 T7i T6 T6i T6s T5 T5i SL3 SL2 90D 80D 77D 7D 6D 5D M50 Mark II M6 Mark II M5 can be used to replace Canon OC-E3 cord. Please check the following description for flash models.
NOTE: It’s fit for most Canon cameras and flashes except D2000, EOS 630 RT M10 and some flashes.
A shoe mount on the bottom of flash connection shoe and a 1/4"-20 threaded Studs, allowing you mount it onto flash bracket and tripod with 1/4"-20 threaded Studs. 1.3m coiled cord design ensure you to be convenient for shooting.
The Off-Camera Flash Shoe Cord maintains all the on-camera functions for one Canon flash used off-camera at distance up to 1.4m.
The Flash Hot Shoe Cord helps achieve off-camera flash photography results without the harsh shadows behind your objects common when using direct flash exposures.

Check Stock