ReviewsCamera For 3d Printer 2

MakerBot-MP05823 PLA Filament, 1.75 mm Diameter, Small Spool, Black

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

CR Scan Lizard 3D Scanner, Up to 0.05mm Accuracy, 10 FPS Scan Speed, Supporting Turntable/Handheld/Combination Use Modes for 3D Printer

  • 2023 Upgraded Creality CR-Scan Ferret 3D Scanner - Creality ferret scanner offers exceptional scanning performance and most economic compared to other similar scanners. It is the best choice for you to create a masterpiece! Great companion for 3d modeling,3d printer..
  • Wide-range & High-accuracy Scanning - Creality scanner ferret offers dual mode scanning capabilities with both wide-range and high-accuracy modes. Users can easily switch between the two modes based on their specific scanning needs. Additionally, the wide-range mode allows the single capture range is up to 560*820mm.High-accuracy mode,up to 0.1mm accuracy and 0.16mm 3D resolution ensure better dimensional accuracy and capture more details..
  • ASIC Chipset,10 x Faster and Smoother - Ferret scanner is built with ASIC deep computing chips that provide powerful image processing capabilities of up to 60 frames per second for megapixel images. These chips are over ten times faster than general chips, resulting in faster and smoother scanning. The scanner can capture 3D point clouds at a rate of up to 30fps, greatly improving scanning fluency and efficiency..
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Cool Gray, MP05784

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05779 PLA Filament, 1.75 mm Diameter, Large Spool, Red

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05783 PLA Filament, 1.75 mm Diameter, Large Spool, Warm Gray

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

Official Creality Ender 2 Pro 3D Printer, Mini 3D Printer with Silent Board Removable Magnetic Build Plate Lightweight and Portable Printing Size 6.5x6.5x7inch, 3D Printer for Kids and Beginners

  • 【Excellent 3D Printer for Kids and Beginners】As an entry-level printer, ender-2 pro is easy to assemble and operate. You do not have to spend much time to learn how to use it, allowing kids and beginners to get involved in the beautiful culmination of creativity and science with 3D Printing..
  • 【Light and Portable】You can take this printer to anywhere easily since it is only 10 pounds weight. And due to its small size, it is prefect for office, dorm room and classroom..
  • 【Easy and Fast Assembly】Ender-2 Pro is 90% Preinstalled which makes this 3D printer mini is convenience to use when you Just Receive It, Only 7 Screws You Need to Tight..
  • 【Simple but Stable Structure】Unlike the Ender 3Pro or Ender 3V2, this printer takes a cantilever structure. The easier structure makes the 3d printer more lightweight. This small 3d printer takes an extra Z-axis fixed block, it can remain stable throughout the entire printing process..
  • 【Low Noise】Creality Ender 2 Pro comes with silent board. The desktop 3D printer finishes every printing model quickly and efficiently, never disturbs kids rest when performing in quiet working mode..
Check Stock

3D Printers, Mini 2-in-1 3D Laser Engraver Printer with Removable Heated Bed, DIY Desktop 3D Printers for Beginners with PLA Filament, Smart Control, Resume Printing, 90% Pre-Assembled

  • 3D Printer for Beginners - The CRUX-1 is an intuitive and user-friendly 3D printer that's perfect for both professional users and beginners. Its 2.8-inch LCD touchscreen displays the real-time printing progress and supports eight languages, making it easy for everyone to use. Unlike other products with exposed power supplies, the CRUX-1 has an integrated modular design that includes a built-in power supply for enhanced safety. Enjoy the fun of DIY 3D printing!.
  • 2-in-1 Innovative 3D Laser Printer - The CRUX-1 2-in-1 3D Printer unleashes your full creative potential, allowing you to switch between 3D printing and laser engraving. Its large rotary nuts make the leveling process easier, while the hotbed comes with a replaceable fiberglass sheet. The printer is compatible with Windows, Mac OS, and Linux systems, and you can operate it through a TF card, USB flash drive, or USB cable (which is included)..
  • Lightweight and Portable 3D Printer - This mini FDM 3D printer is lightweight, portable, and quick to assemble. Its compact size of 7 x 7 x 7 inches (180 x 180 x 180mm) makes it ideal for students and DIY enthusiasts. It comes with a convenient handle for easy ....
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

Arducam Noir Camera for Raspberry Pi Infrared Camera Module Sensitive to IR Light 5MP OV5647 1080P

  • 5MP camera natively compatible with the official Raspberry Pi camera modules and motherboards.
  • No IR filter, sensitive to Infrared light. Serve as a night vision camera with external light sources like IR LED illuminators.
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement.
  • Used on Raspbian, MotionEye, OctoPi for your 3D printer, surveillance camera or other Pi cam projects.
  • Ribbon cable for Pi Zero(B076Q595HJ) and 200cm/6.5ft extension cable(B072HVZYHF) for projects like 3D printers are sold separately.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Pink PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Pink PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Pink - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience),....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Silver PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experien....
Check Stock