ReviewsCamlock Adapter Fitting

EK-Quantum Torque Rotary 90° - Black 90 Degree Fitting

EK-Quantum Torque (Adapter Fitting) is a revolvable angled (90°) adapter fitting with G1/4" threads..
In the form of a cylinder, it is very sturdy and there are zero movements in the revolvable joint..
This Quantum Line adapter is made out of CNC machined brass while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy....
The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing for easier bends....
The outer diameter measures 23mm while the installed height is 31.5mm..

Check Stock

2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)

【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..

Check Stock

Air Venturi Foster Female to 1/8-Inch BSPP Male Quick-Disconnect Adapter, 5,000 PSI

QUICK-DISCONNECT ADAPTER: Add this foster female quick-disconnect adapter to your air-hose fittings to give your air guns more pressure and power! This adapter works with a variety of PCP air guns to keep you prepared for your shooting sessions..
VERSATILE ADAPTER: This air-fitting adapter has a universal-fitting design that lets you connect your air gun to this quick-disconnect piece. It works with a 1/8-inch BSPP male adapter and has a maximum pressure of 5,000 psi..
COMPACT PCP ADAPTER: Our adapter air fitting is compact enough that it won't get in your way when you need to refill your high-pressure air guns. Take this small adapter anywhere you go, and attach it to a variety of PCP guns whenever you need to!.
EASY TO USE: To begin using your quick-disconnect adapter, simply hook up your adapter to your PCP guns. It includes an easy-to-install flow restrictor, and it fills your air guns slowly while reducing the heat build-up in the cylinder..
AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..

Check Stock

Gloxco 1-1/2\ x 25′ Blue Lay Flat PVC Hose Assembly with Aluminum Cam and Groove C and E Fittings used with a Sump Pump or Water Transfer Pump for Water Discharge, Pool Drain or Backwash

1-1/2" ID, 2-3/8" Flat Width, Discharge Hose, 25 Ft Length.
Blue PVC Hose with 2 Spiral Plies Reinforcement.
1-1/2" Female Type C Camlock x 1-1/2" Male Type E Camlock.
Aluminum Cam and Groove Fittings, Installed with 2 Galvanized Steel Bands per Side.

Check Stock

Aupoko R12 R22 to R134a Adapters, R134A Refrigerant Tank Adapter Kit with Valve Core Remover, 1/4' Male to 1/2' Female, 1/4’’ SAE Female X 1/2’’ Male Refrigerant Tank Adapters

★ FITMENT ---- R134A to R12 fitting adapter refrigerant tank, perfect fit for air conditioning refrigerant system..
★ PREMIUM QUALITY ---- The R134A brass vacuum pump adapter is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
★ EASY INSTALLATION ---- R134A adapter is quick and easy to install, secure fitting, no-leak connection..
★ DIMENSION ---- 1/4" Male to 1/2" Female, 1/4’’ SAE Female X 1/2’’ ACME Male R134A adapter fitting with valve core..
★ 1 YEAR WARRANTY ---- Order r134a adapter fitting from Aupoko, we can provide 12 months warranty, should be there any question, please feel free to contact us..

Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Camco RhinoFlex Clear RV Sewer Hose Elbow with 4-in-1 Adapter (39736)

Securely Connects: This RV sewer elbow adapter fits securely into 4 dump station inlets: 4-inch NPT, 3.5-inch NPT, 3-inch NPT, and 3-inch slip fitting.
Clear RV Sewer Elbow: The elbow is clear, so you can see when your sewer hose has finished draining.
has a built-in gasket for an odor-tight connection.
Compatibility: The swivel bayonet fitting makes the RV sewer hose adapter compatible with any lug fitting and allows it to rotate 360 degrees, making it easy to connect.
Easy Storage: Elbow detaches from the 4-in-1 adapter and fits into a 4-inch square RV bumper.
Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.

Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.

Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

...ing Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..

Check Stock

Lichamp A/C R134A Adapters with Puncture 134A Can Tap, AC 134 Quick Coupler Hose Connector Fitting Kit with Tank Adapter and Valve Core Remover, QA02

Professional AC R134A freon charging tool kit, come with pair of R-134A adapter, 1-piece ac can tap valve with tank adapter, 1 classic valve core remover..
R 134A Adapter, adjustable valve for easy attching and removal without freon leaking, accurate snap lock (5 ball) with knurled grip ring for easy operation, removable copper adapter for longer maintenance, 1/4 inch male fitting compatible with most automotive air conditioner diagnostic AC manifold gauge hose.
Can Tap Valve Set, R-134A can tap refrigerant bottle dispenser with 1/4 inch male fitting, extra conversion tank adapter featuring 1/4 inch female to 1/2 inch male fitting, thus this set will fits both 1/4 and 1/2 inch female fittings AC gauge hose.
Come with extra automotive high and low pressure side service port valve core removal and installation tool, dual head with thick and thin heads will fits most models.
100% SATISFACTION: If you aren't satisfied with your purchase, contact us through our email at any time you want, and we'll issue you a refund..

Check Stock

AR Blue Clean PW909103K Quick Connect Garden Hose Adapter 3/4 Inch

Inlet Fitting: 3/4” Garden hose connection with integrated filter.
Outlet Fitting: Aluminum 3/4” BSP threading.
Quick Connect: Snap your adapter into place in seconds with the quick connect system, simply pre-attach your adapter to your garden hose and the inlet....
Integrated Filter: The built-in filter protects your pressure washer from any unforeseen debris from your garden hose.
Swivel Inlet: Achieve a secure fasten easily with the swivel grip located on the inlet of the adapter.

Check Stock