ReviewsCamshaft Pulley Holder

Camshaft Holding Tool Timing Alignment Holder Tool Set Kit for Ford Lincoln Mercury 3.5L 3.7L 4V Engines Replace 303-1248 303-1530 OTC 6682

  • Fitment Vehicle: Fit Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor.
  • for Lincoln MKS, MKT, MKX, MKZ, Navigator.
  • for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682.
  • Exact Match: This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending $300 for a car factory brand tool.
  • Material: Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine.
  • Professional Timing Tool: This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L & 3.7L camshaft at TDC to perform service.
  • Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the product have any quality problem.
Check Stock

Texas Speed TSP Torquer V2 232/234 .600\/.600\ Camshaft 112 LSA 4.8 5.3 5.7 6.0 LS Engines. Includes Springs, Pushrods and Gasket Kit (Camshaft, Springs and Gasket Kit)

  • Texas Speed TSP Torquer V2 232/234 .600"/.600" Camshaft 112 LSA Includes Springs, Pushrods and Gasket Kit.
  • Includes .660" Dual Spring Kit w/ Integrated One-Piece Seat & Seal, Titanium Retainers, PAC Springs, 7.400" Chromoly Pushrods and Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal..
  • The Torquer V2 camshaft is a very popular camshaft for customers wanting a big power camshaft that makes big power gains while still having the option of running a beehive valve spring. The 112LSA helps to bring the camshaft's powerband lower in the RPM band. The lower LSA also creates a slightly rougher idle. The Torquer V2 camshaft is a very popular camshaft for customers wanting a big power camshaft that makes big power gains while still having the option of running a beehive valve spring..
  • Dyno testing has shown the Torquer V2 camshaft to make a solid 50-55 RWHP gains! With the Torquer V2 camshaft, we typically recommend the customer have at least a 3,000 RPM stall speed torque converter for automatic cars..
  • Tuning will also be required in both automatic & manual applications..
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

EWK 50mm Crankshaft Pulley Wrench Holder Tool Crank Removal Holding Spanner kit for Honda and Acura Engines

  • 【 Specialty Tool 】 EWK professional grade Acura and Honda crank pulley tool.
  • holds the harmonic damper pulley in place and keep it from rotating....
  • 【 Wide Applications 】 Works with a 1/2 inch breaker bar or ratchet, this crankshaft pulley holder fits the hex shape of harmonic balancer on many....
  • 【 Great Compatibility 】 Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing....
  • 【 Tough and Sturdy 】 Highly recommended by professional mechanics! Constructed with hardened Chrome-Molybdenum steel alloy, extremely durable and....
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If....
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

Texas Speed TSP 228R 228/228 .600\/.600\ Camshaft, Spring Kit, Chromoly Pushrods, and Gasket Set. 4.8 5.3 5.7 6.0 LS Cam (Camshaft, Spring Kit, and Gasket Set)

  • Texas Speed TSP 228R 228/228 .600"/.600" 112 LSA Camshaft 4.8 5.3 5.7 6.0 LS Cam.
  • Includes TSP .660" Dual Spring Kit w/ PAC Racing Polished Springs, Titanium Retainers, Hardened Spring Seats, and New Valve Stem Seals, Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal.
  • The 112LSA helps to bring the camshafts powerband lower in the rpm band. The lower LSA also creates a slightly rougher idle..
  • The 228R camshaft is a very popular camshaft for customers wanting a very streetable camshaft that makes approximately 5-7 more horsepower than the 224R camshaft..
  • Dyno testing has shown the 228R camshaft to make a solid 45-50rwhp gains. The 228R camshaft is large enough that we recommend a larger than stock stall converter in automatic cars. Tuning will also be required in both automatic & manual applications..
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

Orion Motor Tech Engine Timing Tool Kit, Crankshaft and Camshaft Timing Belt Locking Alignment Tool Set Compatible with Ford Focus Escape Transit Volvo S60 S80 V60 V70 More for 1.5L 1.6L VCT Engines

  • ... (2013-2018), Fiestas (1995-2020), Galaxies (2006-2020), Kugas (2012-2020), Pumas (2000-2002), and Transits (1977-1986).
  • the tool kit is also compatible with late model Volvo S60s, S80s, V40s, V60s, and V70s (2010-2020).
  • EASY TO USE: This OEM-equivalent engine timing belt tool set includes a sprocket locking tool, a camshaft alignment plate, camshaft setting bar, crankshaft pulley alignment tool, crankshaft timing peg, and all the pins necessary for locking the rest of your engine's timing.
  • 1 YEAR WARRANTY: Order this rigorously tested alignment tool set today, knowing that its strong warranty and our usual friendly 24/7 customer service ensure you'll enjoy worry-free shopping and maintenance experiences.
Check Stock

XtremeAmazing Engines Cam Phaser Lock Out Kit Camshaft Pulley Mounting Bolt and Timing Chain Lock Wedge Tool Repair kit

  • Cam Phaser Lock Out Kit : Eliminate the noise and prevent it from reoccurring in the future when the worn phasers shift back and forth, triggering a valve timing adjustment as they move..
  • Fits 2005 - 2012 Ford 5.4L 3V Expedition, Navigator.
  • 2006 - 2010 4.6L 3V Explorer, Mountaineer.
  • 2011- 2012 6.8L 3V F-59 Commercial Stripped Chassis.
  • Fits 2005 - 2009 5.4L 3V F-Super Duty 250-550.
  • 2005 - 2009 6.8L 3V F-Super Duty 250-550.
  • Package Contents: 2 x Valve Cam Phaser Lock Out Kit, 2 x Camshaft Pulley Mounting Bolt, 1 x Timing Chain Lock Wedge Tool.
Check Stock

GOZWELL Precise Contour Scribe Tool with Lock for Pencil - Woodworking Edge Corner Measuring Profile Duplicator (1 Pack)

  • A simpler method of copying various shapes, very suitable for tile bonding, laminate and carpet cutting, ceramic and tool mold making, etc.
  • Pulley and pointer design, both ends can be used. Drawing on the pulley side is smoother, while drawing on the pointer side is more accurate and easier. The pencil holder can be moved up and down for easy replacement of the styling end.
  • The operation is simple and can be adjusted with one hand. Fix the pencil in the middle and draw as you push it. It is easy to draw lines without making mistakes.
  • The tightness can be adjusted according to your needs. It is especially suitable for drawing the contours of irregular and complex objects. It can be locked and fixed after each adjustment to ensure accurate accuracy.
  • Adjustable pencil holder, can holder 2-12mm marker pens.
Check Stock

The American Queen

  • 【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
  • 【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.
  • 【ADVISE】Timing kit and water pump kit should be changed at an interval of 40,000 to 50,000 miles, and also when the water pump fails to avoid engine overheating and failure. If you have any questions, please feel free to contact us, we will reply within 24 hours.
Check Stock