ReviewsCan Bus To Ethernet Converter Module

USB to CAN Converter Module for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Jetson Nano/Tinker Board and Any Single Board Computer Support Windows Linux and Mac OS

  • The USB to CAN Converter Module compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop..
  • The USB CAN Module support Windows System, Mac OS and Linux, Raspbian(v5.4 kernel), Ubuntu..
  • Plug and Play USB CAN device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. Support for CAN bus 2.0A and 2.0B specification..
  • Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins.120 Ohm resistor selectable jumper feature..
  • Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSBKit for Mac Os(Big Sur)..
Check Stock

UGREEN Cat 7 Ethernet Cable Bundle with USB to Ethernet Adapter Network

  • ... RJ45 Port: USB 2.0 Ethernet Adapter is a good solution for adding a standard RJ45 port to your Ultrabook, notebook, or Macbook Air for file transferring, video conferencing, gaming, and HD video streaming..
  • Fast Speed: Full 10/100 Mbps fast Ethernet performance over USB 2.0’s 480 Mbps bus, the usb network adapter converter is faster and more reliable than most wireless connections. Link and Activity LEDs. USB powered, no external power required..
  • Practical Feature: USB to ethernet supports Wake-on-Lan (WoL), Full-Duplex (FDX) and Half-Duplex (HDX) Ethernet, Crossover Detection, Backpressure Routing, Auto-Correction (Auto MDIX). Support IPv4/IPv6 protocols and 10BASE-T and 100BASE-TX networks..
  • Widely Compatible with Nintendo Switch, Nintendo Switch Lite, Wii and Wii U supported, more stable and faster network for gaming. The USB RJ45 Adapter is widely compatible with Windows, Mac OS, Linux kernel 3.x/2.6, and Chrome OS. Note: 1. Linux kernel 3.x/2.6.x, Windows 7/XP/Vista 32/64-bit require driver install via download or included disk. 2. Not supported on ARM-based Windows, including Surface RT and Surface 2..
Check Stock

2PCS DC-DC Boost Converter, DC-DC 3.3V-13V to +15V/-15V Positive Negative Dual Step-Up Converter Board

  • This boost converter module can convert DC 3.3V~13V to DC ±15V..
  • The boost converter module can output positive and negative voltages..
  • Working Frequency: 400kHz, and the power module is automatically raised and lowered..
  • The boost converter module can be widely used as power supply for for ADC, DAC, LCD, and etc..
  • Maximum Input Current: 1.8A, Maximum Output Current: +Vo 600mA,-Vo 120mA, Quiescent Current: 3-4mA.
Check Stock

Dell PowerEdge M1000e H330H Blank Insert Module

  • Resilient HA stacking with up to 6 switches (only SFP+ ports can be used for stack connections).
  • Up to 24 auto-sensing 1/10Gb Ethernet switching ports available.
  • 16 internal server 10Gb (KR) Ethernet ports with auto-negotiation capability to 1Gb Ethernet.
  • 4 external integrated 1/10Gb SFP+ Ethernet ports.
  • Flexible media choices for up to 4 additional 1/10Gb uplink ports with one optional FlexIO Module: 4-port SFP+ 10GbE module 3-port CX-4 10GbE copper module (supports 10Gb connections only) 2-port 10GBASE-T 10GbE copper module (supports 1/10Gb connections).
Check Stock

StarTech.com 10/100 Mbps Ethernet to Fiber Optic Media Converter - ST Multimode - 1310nm - 2km - Full/Half Duplex MCM110ST2 Black

  • ETHERNET OVER FIBER EXTENSION: Use this Ethernet to fiber optic media converter to convert and extend a 10/100 Mbps Ethernet (RJ45) connection up to....
  • ADVANCED FEATURES: For added convenience, this Multimode fiber media converter features Link Fault Passthrough (LFP), auto-switching MDI and MDI-X....
  • PLUG AND PLAY: Designed for ease of use, this Ethernet to optical fiber media converter provides a quick and easy setup, enabling even novice users to....
  • COMPACT ENCLOSURE: Designed to be compact, this versatile media converter features a lightweight plastic casing. It can extend extreme distances,....
Check Stock

Wiitek SFP+ to RJ45 Copper Modules, 10GBase-T Transceiver Compatible for Cisco SFP-10G-T-X, Ubiquiti, Netgear, Mikrotik, Unifi (Cat 6a/7 or Better, 30-Meter)

  • WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.
  • CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports).
  • PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az.
  • Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery.
  • HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing.
  • SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support..
Check Stock

ENET Cable for BMW E-SYS, Ethernet to OBD Interface Cable, OBD II to RJ45 for BMW Coding F-Series 1 Series 3 Series 5 Series GT X3 & G-Series, 16 Pin Car Diagnostics Scanner Connector Cable Tool

  • ...M coding cable made of premium material, this car usb cable obd2 diagnostic scanner is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • What You Will Get – We offer icom coding f-series for bmw enet 24 month service, any questions about OBDII cable converter adaptor, pls contact us by Email, the software will be sent to you by Email, we will reply you within 24 hours. You will get a OBD2 connector scan tool ENET Cable for BMW, with CD inside the package.
Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

  • 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
  • ultra-low input and output pressure difference..
  • 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
  • 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
  • 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
  • the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
  • 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check Stock

Mini 1.25G Media Converter(kit #1), SFP Slot, with a SFP Module, MMF, 850-nm, 550-m

  • Small size: nearly 50% smaller than traditional converters. Its compact modular design facilitates deployment in a narrow desktop location to save space..
  • 1x Dual LC fiber Optical Port: 1.25Gbps, 850nm wavelength, support Gigabit Ethernet.
  • 1x RJ45 Port: 10M/100M/1000M, supports Full/Half Duplex auto-negotiation and MDI/MDIX auto-crossover, conform to IEEE 802.3/802.3u/802.3z/802.3ab, UTP/STP Cat.5e for 100 meters..
  • Smart Management: LED indicators for PWR, FX, 1000, LINK can dynamic feedback link connection state and fault detection to easily monitor network status.
  • DIP switch for LFP, 9K, Flow Control,100/1000 can support LFP (Link Loss Propagation) feature.
  • the max 9000 byte Ethernet packet, jumbo frames supported.
  • Easy Installation and Use: Modulization configuration design, support hot-swappable, plug and play. 2 side heat dissipation holes and durable metal shell helps dissipate heat under extreme conditions. The working temperature range is 0°C-50°C (32°F-122°F)..
  • What You Get: 1x 1.25G SFP Slot Media Converter.
  • 1x 1000Base-SX SFP Module, 1x Power Adapter(5V1A, UL Certified).
  • 1x User Manual. 30-day Money-Back guarantee with 1 Year warranty and lifetime tech support..
Check Stock

ECHOGEAR 10U Network Rack - Wall Mountable Heavy Duty 4 Post Design Holds All Your Networking & AV Gear - Open Frame Design Includes 2 1U Vented Shelves & Mounting Hardware

  • ✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.10 Pack.
  • ✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Netgear, D-Link, TP-Link and Other Open Equipments with 10G SFP+ Port..
  • ✅Hot-pluggable: PLUG and PLAY,operating temperature range: -20℃ to 70℃. Widely used in Switches, Server, Routers, NIC, Media Converter,and other fiber optic equipments..
  • ✅Low Power Consumption: The power consumption is only less than 2.5 Watt, that can save costs wisely. Low EMI. Each sfp+ module is individually done test before packing..
  • ✅After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support..
Check Stock

StarTech.com Gigabit Ethernet Fiber Media Converter with Open SFP Slot - Fiber to Ethernet Converter - Gigabit Ethernet Media Converter (ET91000SFP2)

  • Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis.
  • Open SFP slot supports MSA-Compliant Single / Multi-Mode Gigabit SFPs at varying distances.
  • Advanced features include Link-loss forwarding, remote monitor status, two frame lengths.
  • Convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your choice.
  • Compatible with NETGEAR ProSAFE JGS524NA / Comparable to ET91000LC2.
  • Fiber to Ethernet Converter w/ Open SFP Slot / Multi / Single-Mode Fiber Converter.
  • 1000 Mbps Gigabit Ethernet Media Converter / Fiber Optic Converter / Ethernet Over Fiber-1000Base-SX.
  • Extend/Bridge networks over to fiber another building.
Check Stock