ReviewsCan Ethernet Breakout Module

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

  • 【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
  • 【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • 【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
  • 【FAN Header】5V/12V, allows speed adjustment and measurement.
  • 【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.
Check Stock

CZH-LABS RPi Screw Terminal Block Breakout Module with Aluminum Enclosure for Raspberry Pi 1 2 3 Model B/B+

  • RPi Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Raspberry-Pi projects to industrial....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
  • Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
  • Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
  • Packing list: 1x Terminal Block Board, 1x Aluminum enclosure(top and bottom covers), 2x DIN rail adapter Bracket, 4x Brass standoff, 5x M3x4mm Flat....
Check Stock

Adafruit 4201 Airlift – ESP32 WiFi Co-Processor Breakout Board

  • a breakout board that lets you use the powerful ESP32 as a WiFi co-processor..
  • Having WiFi managed by a separate chip means your code is simpler,.
  • Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer.
  • We placed an ESP32 module on a PCB with level shifting circuitry, a 3.3V regulator, and a tri-state chip for MOSI so you can share the SPI bus with other devices.
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

Electronics-Salon Arduino Screw Terminal Block Breakout Module, for Arduino UNO R3.

  • Terminal Block Breakout Module - for Arduino UNO R3. the item has been soldered and assembled..
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino MEGA-2560 R3

  • Terminal Block Breakout Shield Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
Check Stock

Electronics-Salon Pi Screw Terminal Block Breakout Module, for Raspberry Pi.

  • Pi Terminal Block Breakout Module - for Raspberry Pi..
  • The item has been soldered and assembled, with mounting screws, standoffs and labels..
Check Stock

Morris Products 87124 Voice/Data and Expansion Module

  • DIN Rail Mount 4 x 2 Positions Banana Jack Breakout Board Module..
  • A and B position termianl blocks, maximum current 20 Amp (each position). Pitch 7.62mm/0.3.
Check Stock

Yahboom Raspberry Pi Robotic with Camera Programmable AI Electronic DIY Tank Robot Kit for Teens Adults Compatible Pi 4 B Model 3B+ G1 Tank Without Pi

  • 【Update AI Function】Raspberry Pi tank kit is compatible with the Raspberry Pi 4 module B (2G/4G/8G). It not only retains the basic functions of....
  • 【Real-time transmission of 5G HD video】Robot tank is professional DIY toy, suitable for electronic amateurs and teens over 16 years old. The tank....
  • 【Programmed&tutorials&APP】Robot work with Raspberry Pi 4B, using Python/C++ as the main programming language and Open Source CV as the image....
  • 【Sensors&Breakout】The rich sensors such as 2DOP camera, colorful searchlight, ultrasonic module, and 4-way patrol module make the RPI tank more....
  • 【Top robot platform】This tank kit is composed of aluminum alloy solid chassis, two high-power 370 motors, metal couplings, high quality tracks, a....
Check Stock