ReviewsCanik Mete Sfx Red Dot

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • ... picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes rapid target acq....
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • ... picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
Check Stock

Ade Advanced Optics RD3-012 Delta Red Dot Micro Mini Reflex Sight for Handgun - FDE/TAN Body Color

  • ...ght dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY)..
  • It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
  • Comes with battery, protective cover, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, wheel dial reference tool, allen wrench, screw driver, anti-flickering robber shim..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and lockable elevation adjustments. Weight approximate 1.6oz..
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun

  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
  • This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot..
  • However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short...
  • Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Powered by a lithium CR2032 battery.
  • ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..
Check Stock

Ade Advanced Optics Huracan Green Dot Micro Mini Reflex Sight for Handgun - FDE/TAN Body Color

  • Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • ... picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight ....
Check Stock

Concealment Express IWB KYDEX Holster fits Canik TP9SFX | Right | Carbon Fiber Black

  • INSIDE THE WAISTBAND KYDEX HOLSTER fits: Canik TP9SFX (ONLY unless Specified). Our minimalist IWB holsters are designed to be worn comfortably inside the waistband with an untucked shirt for proper concealed carry. We use .08” KYDEX precision formed over our proprietary in house CAD designed and crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all of our holsters..
  • EXCLUSIVE HOLSTER FEATURES: Accommodates Slide Mounted Optics/MOS/RMR/Red Dot Sights. Claw Compatible to Minimize Printing! Adjustable Cant (-5 to +20 Degrees). Adjustable 'Posi-Click' Retention - Hear a Satisfying Click when Holstered. Undercut Trigger Guard for ease of Draw. Over-cut Open-face to Accommodate Threaded Barrels. Full Length Sweat Guard with Rear Sight Shield. Fiber-Reinforced Stealth Belt Clip so no one knows you are Carrying. All Black Oxide Steel Hardware with Threadlock.
  • ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your firearm you'll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. ....
Check Stock

IWB Gun Holster with Mag Pouch by Houston - ECO Leather Concealed Carry Soft Material | FITS Glock 17/21, H &K,Beretta 92 FS,XDM,Ruger 45 BERSA PRO,PX4,FNX 45,FNH 45,HI Point 9/40/45 MM (Right)

  • FITS GLOCK 17 / 21 / 22 | RUG: American 9mm, 9E, SR .45, Canik TP9 SA, P89 9mm | SIG SAUER: 226 Tacops, 226, 229 | SPRINGFIELD: XDm 4.5” 9mm, XDm 4.5” .45, XDm .45 ACP, XD .45 ACP, XDM .40 SW, XDm 5.25 9 mm, .40 SW, .45 ACP.
  • SMITH & WESSON: M&P 9mm/.40/.45 Full Size ACP, M&P .22, M&P M2.0 9mm, S&W Mod 410, 99| BERETTA: M9A1 9mm, APX 9mm, M9 A3 9mm, PX4, 92 FS | HI-POINT: 9mm, .40 S&W, 9mm and .45 | CZ: P-09 .40, 75B Luger 9mm.
  • CENTURY ARMS: Canik TP-9SA, TP-95A, Canik TP-9SFx, TP-9SF | H&K: VP 9mm, USP 9mm, USP .45 ACP, USP SD 9mm | TAURUS: PT 809 / 92 / 99 AF, APX 9mm, M9 A3 9mm, PT 809 9mm Full Size, MG2 9mm, 24/7 9mm, PT 845 .45 ACP, 24/7 G2 .45 ACP..
  • FN: FNX .45, FNH .45, FNS .40 | RUGER: .45 | BERSA Pro | WALTHER: P99, PPX, Q5 Match, PPQ M2 .45 ACP | 1911 & Clones with Rail.
Check Stock

IWB TUCKABLE Gun Holster by Houston - ECO Leather Concealed Carry Soft Material | FITS Glock 17/21, H &K,Beretta 92 FS,XDM,Ruger 45 BERSA PRO,PX4,FNX 45,FNH 45,HI Point 9mm /.40 /.45 Cal (Right)

  • FITS GLOCK 17 / 21 / 22 | RUGER: American 9mm, 9E, SR .45, Canik TP9 SA, P89 9mm | SIG SAUER: 226 Tacops, 226, 229 | SPRINGFIELD: XDm 4.5” 9mm, XDm 4.5” .45, XDm .45 ACP, XD .45 ACP, XDM .40 SW, XDm 5.25 9 mm, .40 SW, .45 ACP.
  • SMITH & WESSON: M&P 9mm/.40/.45 Full Size ACP, M&P .22, M&P M2.0 9mm, S&W Mod 410, 99| BERETTA: M9A1 9mm, APX 9mm, M9 A3 9mm, PX4, 92 FS | HI-POINT: 9mm, .40 S&W, 9mm and .45 | CZ: P-09 .40, 75B Luger 9mm.
  • CENTURY ARMS: Canik TP-9SA, TP-95A, Canik TP-9SFx, TP-9SF | H&K: VP 9mm, USP 9mm, USP .45 ACP, USP SD 9mm | TAURUS: PT 809 / 92 / 99 AF, APX 9mm, M9 A3 9mm, PT 809 9mm Full Size, MG2 9mm, 24/7 9mm, PT 845 .45 ACP, 24/7 G2 .45 ACP..
  • FN: FNX .45, FNH .45, FNS .40 | RUGER: .45 | BERSA Pro | WALTHER: P99, PPX, Q5 Match, PPQ M2 .45 ACP | 1911 & Clones with Rail.
  • *** THIS IS A RIGHT HAND PRODUCT | TUCKABLE | INSIDE THE WAISTBAND ***.
Check Stock