ReviewsCap Bolt Nut Shaft

(8 Sets) 1/4-20 x 5\ Grade 5 Hex Bolts w/Washers & Nuts - Choose Size

  • THE PERFECT HARDWARE ASSORTMENT: This type of bolt, nut, and washer assortment gives you everything that you need in bulk. When you are working on a project you won’t have to stop to purchase a tool, instead you’ll already have the type and size of the bolt, nut, or washer that you need right in front of you. Our hardware is made with high end stainless steel materials, ensuring a strong hold for practically any use, whether you are using them professionally, or in the comfort of your own home..
  • NUTS, BOLTS, & WASHERS: Fasteners come in many different forms, this set in particular contains three main types. One type is bolts, which are fasteners that require a nut (the second type) or pre-tapped hole to be installed. The third type is washers. This set includes lock and flat washers, which are used to distribute loads of threaded bolts, screws, and nuts evenly as the fastener is tightened. This assortment’s nuts, bolts, and washers can all be used in cohesion with one another..
  • A VARIETY OF SIZES: This bolt, nut, and washer set comes with all of the types of hardware and sizes that you need to complete your project with ease! In fact, the entire set includes over 1,200 pieces, plus a box to store everything in. The sizes of the cap screws range i....
Check Stock

Klein Tools 631 Tool Set, Nut Driver Set w/Hex Nut Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece

  • Tool Set has general-purpose selection of the most frequently used nut drivers.
  • Nut Drivers full hollow shafts facilitate work on long bolt applications with internal flanges that provide solid,twist-resistant shaft anchor.
  • Cushion Grip handles allow for greater torque and comfort.
  • Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener.
Check Stock

Deneve Solar Flag Pole Light, Flag Light, LED Downlight for Most 15 to 25 Ft In-Ground Flag Poles, Fits 0.5" Wide Flag Ornament Spindles (Standard Silver)

  • ...URE THE LIGHT IS IN THE “ON” MODE WITH THE “ON/OFF” BUTTON BEFORE INSTALLING ONTO FLAGPOLE. Warning: please don’t stare at the lights for a long duration of time as it may cause eye damage..
  • EASY INSTALLATION- NO TOOLS REQUIRED– HERE ARE THE STEPS: Lower your pole. Spin your ball shaft and nut off the pole. Center the lights’ hole over the pole’s hole. ENSURE YOU’VE PRESSED THE ON BUTTON so that the light will shine when dark. Re-insert your ball shaft and nut into both holes. Turn your ball shaft finger tight. Adjust your ball shaft nut as needed. Raise your pole. That’s it! Ready for showtime!.
  • This listing is for the solar flag light only. No ball, bolt, ornament, flag, or flag pole is included. Props in product images are for demonstration and application purposes only. Backed by a 100% satisfaction guarantee! Portion of profits will be donated to charity!.
Check Stock

Prime-Line 9118861 K-Lock Nuts With External Tooth Washer, 1/4 inch-20, Zinc Plated Steel

  • Hex nut with a built in free spinning external tooth lock washer.
  • Teeth on lock washer help to lock nut into place.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock

Honoson 3 Sets Cooler Drain Plug Cooler Plug Replacement Triple Snap Drain Plug Cooler Plug Assembly for Coolers 1.1 Inches/ 2.9 cm Shaft Length, White

  • Cooler size: the drain cap is 3.9 inches/ 10 cm in total length, and the gasket is 0.8 inch/ 2 cm in diameter and 1.1 inch/ 2.9 cm shaft length, and the nut is 1.3 inches/ 3.2 cm in total length.
  • Please check whether this product is suitable for your cooler before purchasing.
  • Note: please confirm whether the shaft length is suitable before purchasing.
  • Quality material: the cooler plug is made of quality plastic material, which is odorless, safe and reliable.
  • It is dirt resistant and can keep the drain hole of your cooler clean.
  • Leak-proof design: the cooler drain plug is equipped with a leak-proof gasket, which seals tight to prevent leakage and the tethered cap helps to avoid cap loss.
  • Easy to install: the replacement triple snap drain plug is simple to use, with no other tools required.
  • You just need to pass the plug through the cooler and tighten it with a nut and a washer.
  • You will get: there are 3 pieces of drain caps, 3 pieces of nuts and 3 pieces of gaskets in the package.
  • The size is proper and the quantity is enough for you and your family to use.
Check Stock

Gloxco Greasable Wingnut Assembly for Manways, 5/8\ Eye Bolt, 5-1/2\ Long, Each (WNA-1010-0002)

  • Greasable Wingnut Assembly for Oilfield Manways.
  • Includes wing nut, clevis and cotter pins, eye bolt and washer..
Check Stock

binifiMux M8 x 110mm 65mm Half Thread Furniture Barrel Screws Bolt Nuts Assortment Kit for Crib Cot Bunk Beds Chairs 6 Set

  • - Size: M6 x 110mm Hex Key Drive Socket Cap Furniture Bolt.
  • - Product: Slot Head Hammer Furniture Nut Bolt Set.
  • - Package: 10 * Hex Socket Head Cap Screws Bolts, 10 * Barrel Nuts , one hex key.
  • - Widely Used for baby bed, bunk bed, table, chair, crib, cot, or workbench, boards, cabinets, cupboards, other furniture..
Check Stock

Permatex 24200 Medium Strength Threadlocker Blue, 6 ml

  • Locks and seals while preventing parts loosening due to vibration.
  • Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm).
  • Removable with hand tools for easy disassembly.
  • Suggested Applications: valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock

Husqvarna 48' 4 Bolt Mower Deck Spindle Assembly Replaces 532187281

  • Replaces Husqvarna Part Numbers: 587253301, 587125401, 532192870, 532187292, 532187281.
  • Includes: Spindle Housing, Spindle Shaft, Bearings, Blade Bolt, Blade Washer, Pulley Nut.
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • ...r sturdy forged and welded steel receiver hitch.
  • Unique dual receiver design means the ball mount assembly engages the hitch frame vertically on both sides for optimum structural support.
  • This Black and Chrome Receiver Hitch for Touring Models remains hidden when ball mount is not installed and is the most simplistic bolt-on installation using simple hand tools.
  • Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
  • This Kuryakyn part is most compatible with Harley: '14-'19 Electra....
Check Stock

Klein Tools 647M Tool Set, Magnetic Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2-Inch, 6-Inch Hollow Shafts, 7-Piece

  • Nut drivers' full hollow shafts (except 3/16-Inch [5 mm]) facilitate work on long bolt applications.
  • Rare-Earth magnetic tips on nut drivers hold fasteners in place.
  • Cushion-Grip handles for greater torque and comfort with color coded handle domes for easy identification.
  • Internal flanges provide solid, twist-resistant shaft anchor.
  • Features a hollow shank allowing full engagement with nut to hold fasteners securely in place.
  • Suits for working on electrical and HVAC/R panels and stacked circuit boards.
  • Includes corrosion-resistant chrome-plated shafts and cushion-grip color-coded handles for torque, comfort, and hex size identification.
Check Stock