ReviewsCapacitor For Solder Machine

EVERICA 35+5 uF 35/5 MFD ±6% 370V/440VAC CBB65 HVAC Dual Run Circular Start 35/5 440v Capacitor for AC Air Conditioning Run Capacitor Motor Run Fan Start or Condenser Straight

★ Economical Money Saving and Easy to Install HVAC AC Capacitor 35/5 - Made Exactly to Fit for Most Top Brand Industrial 5 MFD Capacitor.
★ Durable Grade Premium 35/5 Capacitor for AC Compatible with most Carrier AC Capacitor - Meets or Exceeds OEM Specifications Quality. Comes Brand New in Original Retail Packaging.
★ No Questions Asked Money Back Guarantee. Capacitor for AC 35/5 440 comes with 5 Year Warranty or 90 Day Returns. Satisfaction Guaranteed Buy with Confidence.
★ EVERICA Dual Run Capacitor 35/5 440v 50/60hz Operating temperature: -40℃ to +85℃ / -40℉ to +185℉. Safety rated: 10,000 AFC. AC Capacitor 35/5 440 volt. Compatible With Most Cylindrical HVAC Capacitor 35/5 Industrial Electrical Capacitors.
★ Replacement for 97F9834 , Z97F9834 , HC98JA036 , P291-3553R , HC98CA036 , HV98CA035 , 97F9834, R100335-05, 89M73, HC98JA036D , TT-CAP-35/5/440R, RC0102 , TRCFD355 , 12283 , Z97F9848 , Z97F9899 , 97F9899 , cap050350440rs , 12266 , TP-CAP-35/5/440R.

Check Stock

Capacitor 45 5 MFD 370V Dual Run Round Capacitor for Condenser Straight Cool or Heat Pump Air Conditioner

45 5 / MFD 370 volt AC capacitor: round dual run capacitor.
Size: the dual run capacitor measures 3.88 x 2 inches/ 9.86 x 5 cm.
Range of temperature: the round capacitor can work from -40u2109 to 158u2109/-40u2103 to 70 u2103.
UL certificate: This dual run capacitor is built to the toughest USA standards for AC motor run capacitors including EIA-456-A and IEC 60252-1:2001.
Note: 370 45 4 capacitor compatible with GE C3455R, 97F9895, Z97F995, 97F9895BZ3, 27L880, TRCD455, 97F9895.
The brand and model mentioned above is just for demonstrating capability.

Check Stock

Sealed Unit Parts MFD10 LED Display Digital Capacitori Tester

The Supco Capacitor Tester is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
Supco Capacitor Tester provides the fastest measurements of capacitor values with one hand operation.
Supco MFD10 has accuracy ± 5% and range of 0.01 to 9,999 MFD.
The high quality Supco Capacitor Tester includes soft carying case for easy transport of device and test clips.
Repair your appliance with confidence when you choose Supco Capacitor Tester.

Check Stock

MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit

This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..

Check Stock

USA Made Capacitor Oval 10 uf MFD 370 Volt 97F9002, 97F9002s (Replaces Old GE# 97F9002BZ3, Z97F9002, 27L669), 10 MFD at 370 Volts

Replacement Oval Run Capacitor for GE 621435.
Used in a wide variety of applications to keep them running at optimum performance.
Replace your capacitor when it is bulging, leaking, or when there is no continuity accross the terminals.
When buying a capacitor: The voltage should be higher or equal but not lower to the original capacitor. The capacitance (uf, mfd) should match the original capacitor. The Hz should match the original capacitor. The terminal type should match the original capacitor. The size and shape should be considered only when the space in the application is limited..

Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....

Check Stock

KASINGS Icemaker Wire Harness Replacement For KBFS20ETBL00 KBFS20ETBL01 KBFS20ETSS00 KBFS20ETSS01 KBFS20ETWH00 KBFS20ETWH01 KBFS20EVBL00

UpStart Components Replacement W10613606 Refrigerator Compressor Start Relay & Capacitor for KitchenAid KBFS20ETSS00 Refrigerator.
Ultra durable, high quality material resists wear and tear over time..
An affordable way to extend the life of your machine..
Compatible W10613606 Start Device Relay Overload With Capacitor for Part Number W10613606, AP5787784, 67005560, 3023300, 67003186, 67003764, 67005561,....

Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....

Check Stock

Canamax 35+5 MFD uf 370 VAC or 440 Volt Dual Run Round Capacitor - Replacement for Condenser Straight Cool or Heat Pump Air Conditioner 35/5 Microfarad - Replaces 97F9834 Z97F9834

Replacement Dual Round Run Capacitor for GE M24P3730W05.
Used in a wide variety of applications to keep them running at optimum performance.
Replace your capacitor when it is bulging, leaking, or when there is no continuity accross the terminals.
When buying a capacitor: The voltage should be higher or equal but not lower to the original capacitor. The capacitance (uf, mfd) should match the original capacitor. The Hz should match the original capacitor. The terminal type should match the original capacitor. The size and shape should be considered only when the space in the application is limited..

Check Stock

Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack Desoldering Pump Soldering Sucker Tool

UNPARALLELED SUCTION POWER - Good little solder sucker, have a good bit of suction,you can just hang onto it and use your thumb to reset and suck. The ideal tool for intricate soldering jobs..
ONE-HANDED OPERATION - Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily. Say goodbye to tedious two-handed solder extraction and .quickly and easily removing solder.
DURABILITY AND LONGEVITY - Very sturdy,will worke good to remove existing solder from a circuit board. Made with high-quality materials and designed to withstand heavy usage, our Solder Sucker ensures longevity and performance, saving you time and money in the long run..
ERGONOMIC DESIGN - Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering. The comfortable, non-slip handle and lightweight body make our Solder Sucker easy to handle, ensuring maximum control and precision..
VERSATILE APPLICATIONS - A must have excellent solder sucker which fits nicely in your tool box. Our solder sucker desoldering pump is not just limited to soldering. It can also be used for desoldering, removing hair, lint, and dust, and even for cleaning delicate electronics. The ultimate multi-purpose tool for any DIY enthusiast..

Check Stock

Kuzavtye 700PCS Solder Seal Wire Connectors, Heat Shrink Butt Connectors, Waterproof and Insulated Electrical Wire Terminals, Butt Splice (700PCS)

EASY AND FAST PROCESS: All-in-one step solder and seal process. No need for crimp tools and soldering machine. Timer and mess saver..
WATERPROOF AND INSULATION: Dual-walled design - Outside Polyolefin tubing provides insulation and improves pullout strength.
Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal..
STAY ORGANIZED: Our connectors come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application. The connector assortment includes white (AWG 26-24), red (AWG 22-18), blue (AWG 16-14) and yellow (AWG 12-10) solder seal connectors that can be used on wire AWG from 26 to 10..
WIDE APPLICATIONS: Shrinking ratio: 2:1. Ideal used for Automotive, Boat, Marine and other Outdoor Applications..
Kuzavtye BRAND QUALITY COMMITMENT ? We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us..

Check Stock