ReviewsCapillary Copper Pipe

TOWOT Solder Wick Braid with Flux No-Clean Electronic Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10 L 5

Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.

Check Stock

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 9.8'

Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.

Check Stock

AMZCNC Compact Bender Kit with Reverse Bending Attachment for 1/4 - 7/8 Tube and Pipe Bending Premium Ratcheting Tube Bender

【High quality material】: The main body of the tube bender of The copper tube bending tool kit is made of stainless steel, which is pressure....
【Wide range of application】: This pipe bender tool kit is suitable for pipe benders of 1/4"-7/8", applicable pipe materials: copper pipe, aluminum....
【Easy to install】: The pipe bender is easy to install, easy to assemble and operate, and easy to get started. Support pipe diameter: 1/4.
【Ergonomic design】: CT-999 pipe bender conforms to ergonomic design. The kit is made of 304 stainless steel, steel fiber, iron and other....
【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe....

Check Stock

DELIXI Copper Pipe Cutter, 1/8 to 1-1/8 inch Tube Cutting Tool, Reliable Metal PVC Tubing Cutter with Reamer

【Precise and Clean Cut】: Using high-strength alloy steel as main material, this tube cutter performs well in precise cutting. The thickness of the pipe should not exceed 1/10 inch (3mm)..
【Replaceable Blade】: The blade of this copper pipe cutter is replaceable. When the blade becomes dull, please replace the blade with a Phillips screwdriver. When replacing a blade for the first time, pry open the bottom knob to get out the new blade..
【Practical Reamer】: There is a deburring tool on the side of the copper pipe cutter, so you don’t need to bring another reamer when cutting pipes. When the deburring work is done, it can be pushed back in..
【Flexible Adjustment】: The advance and retraction of the scroll structure are both smooth, making the pipe cutting work more efficient. The ergonomic handle design helps to cut quickly and effortlessly..
【Wide Application】: The pipe materials this tubing cutter can cope with are as follows: copper, pvc, aluminum, stainless steel, iron, KBG. Pipe diameter limit 1/8 to 1-1/8 inch（3-28mm）..

Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..

Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....

Check Stock

Libraton Copper Tube Cutter 1/4" to 2-3/4", Tube Cutter, Heavy-duty Tubing Cutter for Copper Pipe with Deburring Tool

[High-quality Blade] Libraton pipe cutter blade is made from aluminum alloy, wear-resistant. It will never get rust..
[Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation smoother and clean..
[Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2-3/4" (70mm)(OUTER DIAMETER)..
[Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, and THIN stainless steel tubes).
[Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..

Check Stock

Pipe Reamer Tool [Plumbers Efficient Helper] Deburring Tool 1/4 to 5/8 Inner/Outer for Copper PVC Pipe Cleaner Stainless Steel Tubing and Pipe Reamer

【Efficient Deburring】Plumber is here! This pipe reamer tool makes smooth work of cleaning up the ends of copper and plastic pipe for better....
【Excellent Grip】This pipe deburring tool has a metal casing that does not deform easily during operation like plastic, which enhances safety, and....
【Deburring Tool for Copper Pipe】There are 4 solid stainless steel reamers inner and outter, enough to deal with PVC pipes and copper pipes, and....
【Small Diameter Friendly】This pvc pipe reamer tool adapts to pipes in the OD and ID range of 1/4" to 5/8", so you can apply it to narrow pipes..
【Portable Debur Tool】2" diameter & 2.36" height, it won't take up too much space in the toolbox, easy to carry. With a good painting process, the....

Check Stock

HVAC Tools Drill Bit Set Air Conditioner Copper Pipe Expander Swaging Tool Copper Tube Flaring Tool Spin Bit Set 6 Pcs Bit Kit Includes 1/4 3/8 1/2 5/8 3/4 7/8 Bits

【6 Pipe Sizes】6 different sizes of drill bits, including 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1/4" triangular handle. Our pipe expansion tool are....
【Working Principle】 When connecting the copper pipes of the air conditioner, the soft copper pipes are expanded by the rotation of the drill bit,....
【High Quality Material】The drill bit is made of ball bearing steel, with high strength, not easy to break, wear-resistant and durable. The....
【Easy to Use】It is very suitable for HVAC installers to perform air conditioning copper pipe expansion operations without complicated learning.....
【Easy to Carry& Store】 Compared with other copper pipe flaring tools, our drill bit set can be carried with you or placed in the tool box, it does....

Check Stock

TINVHY Hydraulic Copper Tube Crimper Copper Pipe Fittings Crimping and Plumbing Tool Crimping Tool with Crimping Dies Jaw 1/2, 3/4, 1Inch

Changeable Crimping Jaws 1/2, 3/4, 1. With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair.
Humanized Design - With this powerful crimper, you can crimp wires and butt connectors easily. Offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds.
Material - The head of crimper is made of durable steel with stainless steel coating, strength and good toughness.
Easy to Carry - The item comes with a durable yellow plastic box, which makes it portable to carry and compact to store.
Replacement for Viega Copper, Elkhart, Conex Pipe Fittings. The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves.

Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
【Easy & Fast Remove】1.Remove the ....

Check Stock