ReviewsCaptive Works

Body Accentz® Nipple Ring Sweet Cherries Captive Bead Body Jewelry Pair 14 Gauge

  • 5mm ball on captive bead ring body jewelry.
  • Jewelry can be used as nipple jewelry or any other piercing as CBR 14g tragus cartilage.
  • Ring length (Inner Diameter) : 3/8" | 10mm.
Check Stock

Scanstrut DS16-P Mini Cable Seal for Connectors to 0.63 and Cables 0.08 -0.35 - Plastic

  • Captive nuts make for easy assembly and also allow reliable repeat installations.
  • Each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
  • An aesthetic dome-shaped profile provides a stronger, impact resistant design and captive nuts in the base make for an easy assembly.
  • Designed for quick and simple installation.
Check Stock

Leviton 5F100-2QL SDX Precision Molded Plate Aqua 50/125um Multimode Laser Optimized OM3/4 Duplex LC 12 fibers Zirconia Ceramic Sleeve

  • Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds.
  • Captive push-lock pins allow for quick tool-less installation.
  • Compatible with all SDX panels and enclosures, rack or wall mount Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and....
  • Compatible with all SDX panels and enclosures, rack or wall mount.
Check Stock

UCTRONICS Upgraded Complete Enclosure for Raspberry Pi Cluster, Compatible with Pi 4B, 3B+/3B, and Other B Model, House Up to 4×2.5\ SSD, Support PoE /PoE+ HAT and Switch, 2 Cooling Fans

  • 【Improvement】 Upgraded from our previous Raspberry Pi cluster case U6243（ASIN:B09JNHKL2N）. Now you can power your fans while using PoE HAT. Compatible with Raspberry Pi official PoE+ HAT and UCTRONICS mini PoE HAT(ASIN:B082ZLDMZ6). Also We replaced the thumbscrews with captive loose-off screws on the mounting brackets, which greatly improves the stability of the brackets. The front and back panel openings are expanded to support more models of switches..
  • 【Wide compatibility】 Designed to house 4×Raspberry Pi 4B, 3B+/3B, or other B models, 4×2.5” SSDs and Ethernet switch in a cluster case. You can use it as a complete desktop NAS. It also has holes reserved for the SD card extension adapter (ASIN: B09CKRDFTH) which allows you to access the SD card from the front of the case. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • 【Front Removable】 Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance..
  • 【Front Removable】 Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to ea....
Check Stock

Jayde N' Grey Enchanted Talavera Pottery Hand Painted Ceramic Sun Wall Plaque Celestial Decor Eclipse Wall Hanging Decoration Art (Sun 9')

  • Enchanted Talavera's mystical Celestial series of hanging art comes in multiple styles and sizes! Round Suns sizes measure: Extra Small 7" x 7" Small 9" x 9" Medium 11.5" x 11.5" Crescent Moons sizes measure: Medium 10" x 8" Large 12" x 9" Sun/Moon "Captive" Eclipses sizes measure: Small 8.5" x 8.5" Medium 12" x 12" Large 15.5" x 15.5".
  • Enchanted Talavera pottery pieces are all hand painted one at a time by our artisans so your item may have slight design and color variations compared to the photos. This makes each piece you purchase truly one of a kind!.
  • Beautiful hand-painted floral design works with any decor style. Certified 100% lead free ceramic.
  • Enchanted Talavera items are NEVER mass produced in factories overseas. Handmade in Mexico with love!.
Check Stock

Transformers Netflix War for Cybertron Trilogy Voyager Class Megatron Battle 3-Pack with Pinpointer and Lionizer

  • SERIES-INSPIRED FIGURE: This Megatron figure is inspired by the character as seen in the Netflix War for Cybertron series.
  • ENHANCED BATTLE-WORN DECO: With 53 deco ops, this series-inspired figure brings fans the most detailed and series-accurate version of one of their favorite characters from the War for Cybertron series.
  • SERIES-INSPIRED ALT MODE AND ACCESSORIES: Megatron toy features classic Transformers conversion from robot to tank mode in 17 steps, and comes with 2 accessories.
  • INCLUDES 2 BATTLE MASTERS FIGURES: Fans can imagine Megatron taking the Autobot Battle Masters as prisoners and using their weapon modes to his advantage. Captive Lionizer and Captive Pinpointer convert into their sword and blaster modes in 5 steps.
  • SPECIAL PACKAGING: When fans see the iconic red and white packaging they know they're getting a figure inspired by the War for Cybertron series (each sold separately, subject to availability).
Check Stock

Kridzisw 16G Surgical Stainless Steel Horseshoe Captive Bead Nose Hoop Ring Septum Eyebrow lip Belly Navel Ring Cartilage Helix Tragus Rook Daith Earring Hoop Rings Piercing Jewelry for Women Men 8mm

  • VALUE SET:24Pcs In A Set With 12Pcs Assorted Color horseshoe rings and 12Pcs Assorted Color captive Bead Hoop rings.Gauge Size: 16G =1.2mm, Diameter....
  • MATERIAL High Quality 316L Stainless Steel is Very Strong, Provides Lasting Color Retention, is Resistant to Tarnishing and Extremely Easy to Clean..
  • [Multiple Using] Horseshoe Hoop Rings And Captive Bead Hoop Rings Can be used as nose hoop rings,septum hoop jewelry,lip hoop jewelr, helix hoop....
  • [QUALITY ] High Polished Smooth Surface and Hypoallergenic Metal Prevents Skin Damage and Makes Healing Process Comfortable and Painless..
  • [ SATISFACTION ] GUARANTEE ] All Kridzisw Products Are Offered 90 Days Money Back or Exchange Guarantee. If You Have Any Problems, Please Contact Us....
Check Stock

Qty 20 M3 3mm M3-0.5 Brass Threaded Metal Heat Set Screw Inserts for 3D Printing

  • ➨ Pack of 20 (Twenty) threaded inserts - great for restocking one of our insert assortments..
  • ➨ These create much more convenient and professional parts than using "captive nuts" (where you have to design a slot for a nut, and then place the nut in the slot and hold it there while affixing a screw). They also can be used in some situations where captive nuts just don't work..
  • ➨ These are inserted into a hole in the print that is slightly smaller than the insert, and set in place using a soldering iron to melt the plastic around the insert. The inserts have a slight taper and small fins that the plastic flows around, resulting in an extremely strong bond..
  • ➨Rather than adjust designs around the limitations of 3D printing (supports, print bed size, etc), divide your parts into separate components that fasten using these inserts and machine screws. Not only does this give you greater flexibility when designing a part, but also allows you to re-print only failed components rather than full assemblies - saving time and money..
  • ➨ These are threaded M3-0.5 with an overall length (OAL) 3.85mm Outer diameter at the top (wider end) is 5.6mm, bottom is 5.12mm Hole size in your product should be slightly smaller than the insert, to allow plastic ....
Check Stock

UCTRONICS Raspberry Pi Rackmount Complete Enclosure Version 2.0 with PoE Functionality, Front Removable 19\ 1U Rack Mount with Captive Screws, Supports Up to 5 RPis

  • We've upgraded! The metal housing has added load-bearing bearings so that the housing is no longer flimsy! Note: Please be sure to check the Buy One Get One Free to get the side bracket so that the whole project works perfectly..
  • What's the difference? Uses Captive loose-off screws for true no-installation, no screwdriver is needed to introduce your module into the enclosure..
  • Easier setup: Screens and power buttons come pre-assembled, saving more setup time and allowing you to focus on your cluster build project..
  • No fear of noise - We replaced the previous noisy PoE hat fan with a new, more durable, and long-lasting ball-bearing fan, no more a noise nuisance..
  • REROUTING with PoE - It's come with mounting plates and rerouting boards with PoE function for Pi 4B, which also moves all of the I/O ports and SD card slot to the front, and adds a push-button switch to control the Pi easily.（not compatible with Poe + switch）.
Check Stock

Lithonia Lighting RD 50K 90CRI MW M6 OneUp-4JBK Direct-Wire LED Recessed Downlight, 5000K/8.9W/720L, Round-Matte White

  • Spun steel, round baffle trim. Integrated galvanized steel junction box with captive door for easy access. Suitable for daisy chaining (pulling wires). Available in 3000K color temperature LEDs.
  • Round baffle recesses optical system into the ceiling to prevent glare and provide a traditional look. Diffused lens provides even light distribution for general illumination, equivalent to 65W incandescent flood lamp. Wide flood beam angle at 003e90°. CRI 003e90. Maintains at least 70% light output for 50,000 hours..
  • Tool-less installation. Secure trim retention with two side-mounted spring clips for easy installation in plaster, sheet rock, or plywood ceilings. The integrated junction box - with pre-installed non-metallic bushing - allows non-metallic cable to be fed through without the hassle of knockouts. The captive junction box door provides easy access to pre-installed 3-port push wire quick connectors for straight-forward wiring. Rated for Type IC installations. Maximum of 4 No. 12AWG through branch circuit conductor suitable for 90°C permitted in box. Ground wire provided..
Check Stock

UCTRONICS Jetson Nano Rackmount, 19\ 1U Rack Mount Supports 1-4 Units, Front Removable with Captive Loose-Off Screws, Compatible with All Nvidia Jetson Nano A02 B01/ 2G Developer Kit

  • This 19-inch rackmount is specifically designed to house Jetson Nano boards, compatible with all models A02 B01, 2GB developer kit. The rackmount is also compatible with the Jetson Xavier NX, but the Bluetooth & wifi base on the bottom of it needs to be removed for a perfect fit..
  • This Jetson rackmount is capable of holding up to 4 modules, it allows you to enjoy rackmount solutions for multiple different types of SBCs..
  • Easy Installation: Fixed with exquisite captive loose-off screws. Perfectly protect your Jetson nano from falling to the ground. All you have to do is rotating the screws. The total installation process will not exceed 10 minutes..
  • Front Removable: Use Captive loose-off screws for true no-installation, no screwdriver is needed to introduce your module into the enclosure..
  • Application: This is a housing solution to optimize the workspace, simple and well made, providing an aesthetically pleasing way to keep things organized. It also can be used for Jetsons clusters, video walls, and so on.
Check Stock