ReviewsCaptive Works 800

Faztek 15 Series Carbon Steel Drop In T-Nut with Alignment Ball, Clear Zinc Finish, 1/2\ Width, 5/16-18 Thread (Pack of 10)

  • 15 Series compatible - works on Faztek Extrusions with 1.5" centerline dimensioning.
  • Save time and add hardware to a captive T-Slot.
Check Stock

Body Accentz® Nipple Ring Sweet Cherries Captive Bead Body Jewelry Pair 14 Gauge

  • 5mm ball on captive bead ring body jewelry.
  • Jewelry can be used as nipple jewelry or any other piercing as CBR 14g tragus cartilage.
  • Ring length (Inner Diameter) : 3/8" | 10mm.
Check Stock

Scanstrut DS16-P Mini Cable Seal for Connectors to 0.63 and Cables 0.08 -0.35 - Plastic

  • Captive nuts make for easy assembly and also allow reliable repeat installations.
  • Each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.
  • An aesthetic dome-shaped profile provides a stronger, impact resistant design and captive nuts in the base make for an easy assembly.
  • Designed for quick and simple installation.
Check Stock

Repair Kit For Kodak Carousel Slide Projector w/Focus Motor

  • Works on Kodak 750, 750H, 760, 760H, 800, 800H, 850, 850H, 860H models.
  • Also Works on Kodak Ektagraphic AF-1, AF-2, AF-3 and B2 models..
Check Stock

Leviton 5F100-2QL SDX Precision Molded Plate Aqua 50/125um Multimode Laser Optimized OM3/4 Duplex LC 12 fibers Zirconia Ceramic Sleeve

  • Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds.
  • Captive push-lock pins allow for quick tool-less installation.
  • Compatible with all SDX panels and enclosures, rack or wall mount Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and....
  • Compatible with all SDX panels and enclosures, rack or wall mount.
Check Stock

Tgom FireWire Adapter 400 to 800 Black

  • IEEE 1394 compliant (black) firwire adapter.
  • Works with standard 6-pin male FW400 cables.
  • Connect FireWire 400 devices to FireWire 800 ports.
  • 9-pin male (FW800) to 6-pin female (FW400) connector adapter.
  • Design for Mac Pro, MacBook Pro, Mac Mini, iMac and all other computers with data transfer rates up to 800 Mbps.
Check Stock

UCTRONICS Upgraded Complete Enclosure for Raspberry Pi Cluster, Compatible with Pi 4B, 3B+/3B, and Other B Model, House Up to 4×2.5\ SSD, Support PoE /PoE+ HAT and Switch, 2 Cooling Fans

  • 【Improvement】 Upgraded from our previous Raspberry Pi cluster case U6243(ASIN:B09JNHKL2N). Now you can power your fans while using PoE HAT. Compatible with Raspberry Pi official PoE+ HAT and UCTRONICS mini PoE HAT(ASIN:B082ZLDMZ6). Also We replaced the thumbscrews with captive loose-off screws on the mounting brackets, which greatly improves the stability of the brackets. The front and back panel openings are expanded to support more models of switches..
  • 【Wide compatibility】 Designed to house 4×Raspberry Pi 4B, 3B+/3B, or other B models, 4×2.5” SSDs and Ethernet switch in a cluster case. You can use it as a complete desktop NAS. It also has holes reserved for the SD card extension adapter (ASIN: B09CKRDFTH) which allows you to access the SD card from the front of the case. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • 【Front Removable】 Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance..
  • 【Front Removable】 Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to ea....
Check Stock

Jayde N' Grey Enchanted Talavera Pottery Hand Painted Ceramic Sun Wall Plaque Celestial Decor Eclipse Wall Hanging Decoration Art (Sun 9')

  • Enchanted Talavera's mystical Celestial series of hanging art comes in multiple styles and sizes! Round Suns sizes measure: Extra Small 7" x 7" Small 9" x 9" Medium 11.5" x 11.5" Crescent Moons sizes measure: Medium 10" x 8" Large 12" x 9" Sun/Moon "Captive" Eclipses sizes measure: Small 8.5" x 8.5" Medium 12" x 12" Large 15.5" x 15.5".
  • Enchanted Talavera pottery pieces are all hand painted one at a time by our artisans so your item may have slight design and color variations compared to the photos. This makes each piece you purchase truly one of a kind!.
  • Beautiful hand-painted floral design works with any decor style. Certified 100% lead free ceramic.
  • Enchanted Talavera items are NEVER mass produced in factories overseas. Handmade in Mexico with love!.
Check Stock

GenuineLogitech Replacement USB Receiver for WirelessPresenter R400&R800

  • The presenter R400 has M/N: R-R0008 and the presenter R800 has M/N: R-R0009. The receiver to be used is with M/N: C-U0014.
  • Works with these products: Professional Presenter R800, Wireless Presenter R400.
  • USB receiver needs to be paired with the Presenter before using. Insert shows pairing instruction. Pairing instructions are also widely available in the internet..
Check Stock

Vantec 2+1 FireWire 800/400 PCIe Combo Host Card (UGT-FW210)

  • Works With Various Types Of FireWire 800 & FireWire 400 Devices Including External Hard Drives, DV Camcorder, Digital Camera, CD-RW/DVD-ROM Drive And Other Audio/Video Devices.
  • Provides Two FireWire 800 (1394b) Ports And One FireWire 400 (1394a) 6-Pin Port.
  • Enjoy Data Transfer Rates Of 100, 200, 400 and 800 Mbps.
  • Built-In 4-Pin Power Connector (Adapter May Be Required).
Check Stock

Transformers Netflix War for Cybertron Trilogy Voyager Class Megatron Battle 3-Pack with Pinpointer and Lionizer

  • SERIES-INSPIRED FIGURE: This Megatron figure is inspired by the character as seen in the Netflix War for Cybertron series.
  • ENHANCED BATTLE-WORN DECO: With 53 deco ops, this series-inspired figure brings fans the most detailed and series-accurate version of one of their favorite characters from the War for Cybertron series.
  • SERIES-INSPIRED ALT MODE AND ACCESSORIES: Megatron toy features classic Transformers conversion from robot to tank mode in 17 steps, and comes with 2 accessories.
  • INCLUDES 2 BATTLE MASTERS FIGURES: Fans can imagine Megatron taking the Autobot Battle Masters as prisoners and using their weapon modes to his advantage. Captive Lionizer and Captive Pinpointer convert into their sword and blaster modes in 5 steps.
  • SPECIAL PACKAGING: When fans see the iconic red and white packaging they know they're getting a figure inspired by the War for Cybertron series (each sold separately, subject to availability).
Check Stock