ReviewsCar Alignment Lift

Supreme Suspensions - 2.5" Front Leveling Kit for 1994-2013 Dodge Ram 2500 3500 and 1994-2001 Dodge Ram 1500 High-Strength Steel Spring Spacers Lift Kit 4WD

  • COMPATIBLE WITH 1994 - 2001 Dodge Ram 1500 4WD, 1994 - 2013 Dodge Ram 2500 4WD and 1994 - 2012 Dodge Ram 3500 4WD. *Does NOT Fit Ram 1500 Mega Cab or Extended Cab models..
  • TECHNICAL NOTES: 2.5 Inch Front Suspension Lift. *An alignment is always recommended after altering the height of your vehicle. **Compressing your springs can be VERY dangerous. For a safe installation process we recommend using a Coil Spring Compressor Tool..
  • HIGH-QUALITY SUSPENSION LIFT KIT: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
  • BOLT-ON INSTALLATION: After an easy 1-2 hour installation process*, you are ready to feature your new and improved ride! *An alignment is always recommended if you are altering the height of your vehicle..
  • LIMITED LIFETIME WARRANTY: All Supreme Suspensions brand products have been thoroughly tested before market release and are backed by or Limited Lifetime Warranty..
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

2PCS Wheel Alignment Tool Turn Plates 5 Ton Aluminum Turntable Wheel Alignment 360° Rotating Turn Plate Table for Car Truck

  • 【Professional Wheel Alignment Tool Turn Plates】This product is specially designed for car truck wheel alignment, put the car on the turntable, the locking pin can fix the turntable in place, which plays an important role in the four-wheel alignment process. Ideal for mechanics or do-it-yourselfers..
  • 【Superior Quality】This product is made of high-quality aviation magnesium alloy, which is strong and durable, and light in weight, which can significantly reduce the weight of the vehicle and reduce energy consumption. And has high strength and high toughness, not easy to oxidize and rust..
  • 【High Performance】This product adopts a full floating ball bearing design, with low friction force and more flexible and fast operation. Strong bearing capacity, can bear the weight of 5 tons. And there are goniometers and needles on it to help you assess caster, camber and steering alignment..
  • 【Complete Kit】This product includes two corner discs, two rubber transition blocks, and two rubber thrust pads. Perfect for any garage or auto shop use..
  • 【Quality Assurance】Our products have undergone strict quality inspection procedures to ensure that the products put into the market are of high quality. If you have any questions, please feel free to contact us.....
Check Stock

Car Ramps - wuyule 2PCS Auto Car Truck Service Ramps Lifts, 10000lbs Heavy Duty Hydraulic Car Ramps Lift for Car Repair

  • 【STURDY MATERIAL】wuyule car ramps is made of high-quality steel, and the exterior is painted to prevent rust. The hydraulic ramp is durable and suitable for all under-vehicle maintenance and inspections..
  • 【MAXIMUM LOAD-BEARING】wuyule heavy duty car ramps can lift 10,000 pounds.
  • the height of the hydraulic part can be adjusted within the range of 9.8-15in..
  • 【CAR RAMP LIFT SIZE】 Bottom length: 45 inches.
  • 【EASY TO MAINTAIN】wuyule heavy-duty hydraulic lift is easy to install, use and maintain. It is an ideal choice for maintenance and is very popular among auto maintenance personnel..
  • 【AFTER-SALES SERVICE】If you have any questions about our car lift, please feel free to contact us. Our car ramp lift are stocked in the United States, with fast and good shipping services..
Check Stock

F2C Wide Deck Scissor Lift Jack ATV Motorcycle Dirt Bike Scooter Crank Hoist Stand 1100 LB

  • Simple crank operation, wide enough to catch both frame rails underneath with room to spare.
  • Two (2) variable screw adapters, designed to fit most motorcycle models.
  • Rubber mat on the lifting platform for added stability.
  • For use in the garage, shop, or at the track. If you're lifting to clean, adjust wheel alignment or something general, this is your lift.
  • This lift is great for lifting one end or the other off of the ground, and even with a very heavy bike will mean it is only lifting about 1/2 the weight of the bike. Just position the lift toward the back or front of the frame to lift the end you want to work on. It is also great to just level the bike with both tires still on the ground for working on things like lights, exhaust, etc.
Check Stock

ReadyLift 69-5212 3 F / 2 R SST Lift Kit - Toyota Tacoma TRD / SR5 / Rock Warrior

  • Tacoma Max Lift: 3.0"F/2.0"R - Max Tire Dia: 32.5".
  • Allows for up to a 33 x 11.5 tire on an 8" wide wheel with 5" backspacing with minor trimming of the inner fender liner.
  • Steel upper strut extensions are the strongest on the market and are designed to position the strut alignment properly with the control arm and upper....
  • Professional installation time is estimated at two to three hours. An alignment will be necessary after installation.
  • Guaranteed for life against manufacturing defects.
Check Stock

PURESOUND Custom Pro Brass Snare Wire - Snare Drum Wires - Drum Wire - CPB1424 - 24 Strand 14 Inch

  • FOR 14 INCH SNARE DRUMS - Designed for 14" snare drums with 24 strands of wire.
  • SPEED RELEASE - Speed Release Strap allows the player to disengage the snare wires for quick head or snare wire changes.
  • ANTI-CHOKE PLATES - Anti-choke end plates lift the coils away from the edge to reduce sympathetic buzz and increase the wire tension range.
  • BRIGHT, RESONANT RESPONSE - Brass coil produces a bright and resonant snare response.
  • NUMBERED FOR ALIGNMENT - Numbered alignment marks on the straps ensure straight and repeatable positioning in the clamp.
Check Stock

Magnum Enterprises Rubberband Shooter Ammo - Short Rifle Ammo-Yellow (Size 33, 4-oz. Bag)

  • THIS IS A SET OF 4 RECTANGULAR RUBBER PADS FOR WHEELTROINCS , SNAP ON , AMMCO* , AND MAGNUM 2 POST LIFTS..
  • THESE ARE ALSO FOUND ON SPACE SAVER ALIGNMENT RACKS ON THE ROLLING JACKS. THESE PADS ARE EXTREMELY DURABLE AND ARE FORMED AROUND A SOLID PIECE OF METAL. THESE USE ONE CENTER BOLT IN THE MIDDLE OF THE PAD TO SECURE IT TO THE FOOT/ WELDMENT OF THE LIFT..
  • THEY FIT THE FOLLOWING MODEL LIFTS AND MAY FIT OTHERS NOT LISTED -WHEELTRONICS LIFT- T10, T9, 8144 V , SPACE SAVER 12000 , AND MANY OTHER MODELS.
  • AMMCO* LIFT- S21NSR1 , S21NXPR1 ,S21NSB3 , S21NSR3 S21NRM1 AND OTHERS -MAGNUM- MANY MODELS WITH ROUND PADS -SNAP ON- MOST MODELS.
Check Stock

KSP 2.5' Leveling Lift Kit, Front Lift Kit for 2004-2022 Ford F150, 03-18 Expedition, 05-08 Lincoln Mark LT,Strut Spacers Raise Front 2.5 inch

  • ❀ Compatibility: For 2004-2019 FORD F150 2WD/4WD.
  • ❀ Attention: Will Raise your truck 2.5″ in the front. Due to suspension geometry, the ratio between lift height and kit thickness is not 1:1. An alignment is always recommended after installing..
  • ❀ Safety: Even in extreme riding conditions, the leveling kits also provide safe driving due to forged from aircraft-grade aluminum billet, 12.9 grade solid bolts.Black andoized surface offers better corrosion resistance. Easy to install, only take 1-2 hours..
  • ❀ Aggressive Look: Give your car an aggressive look and offers extra ground clearance to use larger tires/rims. Compatible with various crazy off-road model. Easy installation and no special tools needed..
  • ❀ Trustworthy Warranty: We offer “30-day refund, 24-month free replace parts ” service. If you have any questions, be free to contact us.
Check Stock

AKM F150 Lift Kit 3' Front and 2' Rear Leveling Lift Kit for 2004-2022 Ford F150 4WD 2WD

  • WARM TIP: This set will raise the front of the truck by 3″ and the rear of the truck by 2″. Suitable for for 2004-2022 Ford F150 4WD 2WD.(The label on some products may not be updated in time,the product is applicable to the F150 mentioned above).
  • HIGH QUALITY: It is made of the same material as the aircraft, which is stronger compressive resistance than steel. High quality black anodized surface enhances corrosion resistance,more durable..
  • EASY INSTALLATION: It can be installed without removing the frame, and can be completed within 1-2 hours without using special tools.Although the thickness of the front lift block is 2″, the height of the car front lift is 3″, the thickness of the rear lift block is 3″, but the height of the car rear lift is 2″.Because the lifting height and kit thickness are not 1:1..
  • ADVANTAGES: Make the front and rear of the car level. Increase the distance between the frame and the ground,make the car look more perfect and cool.But it will never lessen your comfort level..
  • PRODUCTS INCLUDE: 3″Front lift spacers x2,2″Rear lift blocks x2,Zinc Plated U-bolts x4,Nut x8. Be free to contact us if you have any questions about anything.Thank you..
Check Stock

2PCS Portable Car Repair Lift Height Hydraulic Vehicle Ramps for Lowered Sports Cars 5T/11000lbs Capacity Red

  • [Properties] Width of Bottom: 13.3 inches.
  • Width of Top: 11.4 inches, Width of Platform: 9.4 inches.
  • Min Lift Height: 5.9 inches, Max Length of Bottom: 44.9 inches.
  • [High Quality] Heavy Vehicle Maintenance Ramp. Made of heavy duty steel construction for high durability and strength for long lasting durability and long life..
  • [Design] Extended length works great for lowered sports cars that would bottom out on most standard car ramps. Mini-Lift car ramps are designed to do what most standard car ramps cannot, lift lower clearance vehicles like many of today’s sports cars..
  • [Easy to Use] Ideal for professional garage use as well as at home on the drive.No more trying to struggle getting a hydraulic jack under a lowered vehicle for service or scraping the front clip of a lowered car with standard car ramps..
  • [High Flexibility] Each ramp has a built-in 5 ton hydraulic jack for greater flexibility..
Check Stock