ReviewsCar Amps For Bass 2

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

TENINYU 3.5mm Mono Cable - 12V Trigger, IR Infrared Sensor Receiver Extension Extender, 3.5mm 1/8" TS Monaural Mini Mono Audio Plug Jack Connector Male to Male Cable (3FT)

  • Compatible with most A/V components, power amps, pre-amps, projectors, electronic screens, and IR infrared receivers & senders.
  • Molded connectors with strain relief ensure a solid high quality connection between the connected devices.
  • High performance versatile cable accurately transfer quality detailed clean natural pure audio sound with realism and clarity jitter-free mono format signals.
  • Balanced solid conductors for enhanced internal noise rejection and clearer, deeper bass and eliminate strand-interaction distortion.
  • Oxygen Free Copper Lines combined with a double shielding allow for a maximum audio quality.
  • For use with: DVD Bluray player, car audio system, DAC, CD player, game console, AV receiver, digital recorder, headphone, computer sound card, audiophile quality home theater cinema HiFi system and more.
Check Stock

JL Audio RD1000/1 NexD Monoblock Class D Car Audio Amplifier

  • JL Audio RD-Series RD1000/1 | Class-D Monoblock Amplifier | RMS Power Rating: 4 ohms: 500 watts x 1 chan. | 2 ohms: 1000 watts x 1 chan. Total power....
  • Differential-Balanced Inputs | Speaker-level (high-level) inputs: JL Audio XD-CLRAIC2-SW Required, sold separately | NexD Technology delivers....
  • LED power (green) and protect (red) indicators | Soft start turn-on | Mono channel operation | Preamp RCA outputs to daisy chain multiple amps | 3-way....
  • Dual speaker terminals simplify the hookup of multiple speakers | Heavy duty aluminum alloy heat-sink for extreme heat dissipation | Total Harmonic....
  • Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz | Fuse Rating: 80 A x 1 | Dimensions: 7"W x 14-11/16"L x 2-3/16"H.
Check Stock

DS18 2CLC 2 Channel Line Output Converter Car Audio with Digital Bass Enhancer

  • Two channel level input converts your signal from your factory amps to enhance your bass output with an external sub and amp..
  • Easy to tune with main level, bass, and bass enhancer knobs to reach your perfect bass frequencies that you are targeting..
  • Bass enhancer that brings out even more bass where there once was very little, you will get more output..
  • NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most....
Check Stock

IndusTec DPDT 20 Amp 12V 24V (On)/Off/(On) 6 Pin Quick Plug 3 Position Momentary Automatic Reset Toggle Switch

  • 6 male .250 1/4 inch quick connect pins Mounting hole size 12 MM 0r 1/2 inches.
  • 15 Amps at 250 V AC and 20 Amps at 125 VAC, 15 Amps at 250 V AC and 20 12 VDC.
  • Momentary / Resetting / Springing switch is used for jogging operations such as lift, hoist, winch, door, or window resets automatically (returns to off) when released.
  • Our Heavy Duty toggle switches are used in Car, Car Accessories, Truck, Boat, Airplane, Aviation, Motorcycle, ATV, UTV, RV, Automotive, Marine, Industrial, Winch, Actuator, Liftgate, Manufacturing, Solar, Light Bars, Sounds Systems, MRO Maintainence Repair, Engineering, Design, Robotics, DIY Projects and so much more!!.
Check Stock

KICKER 12 Inch Comp RT Thin Woofer Includes Two 48CWRT122 2 Virtual 2 ohm Package

  • Bundle includes: 2 Kicker 48CWRT122 CompRT 12" Subwoofers.
  • 48CWRT122 - High Mass, Solid Pole Piece for Superior Heat Dissipation.
  • 46CXA8001 - Variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want.
  • 47VK6 - Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables.
  • Optional subwoofer grilles and remote bass controllers available.
Check Stock

Dumble Heavy Duty Jumper Cable and Quick Connect Heavy Duty Jumper Cables 1 Gauge Jumper Cables for Cars Trucks 30ft

  • BE PREPARED: Keep the Dumble RV Supplies | Quick Connect Jumper Cable 800 Amp Jumper Cables Long Jumper Cables 30 ft Jumping Cable for Cars in your trunk or car emergency kit so you can safely boost jump your vehicle whenever need.
  • Car jump start cable has 800 Amps peak engine starting current at 12V DC end and 100 Amps at 110V AC service end (175A-600V for disconnect use only – not for interrupting current).
  • FITS YOUR VEHICLE: 1 gauge thick professional grade copper wire to handle more amps and lose less when jumping.
  • 30-foot (9.1m) long cables for car or even tow truck.
  • 4-inch x 5.75-inch (10.2cm x 14.6cm) overall clamp size with 0.25-inch to 1.7-inch (0.6-4.3cm) jaw opening to access tight spots and clamp to top and side post batteries on your vehicle (works for electronic ignitions and other vehicles as long as polarity is correctly observed and battery terminals are accessible).
  • PERMANENT INSTALLATION: Battery booster cable has 4 color-coded clamps to prevent crossing wires – 2 red positive (+) and 2 black negative (-).
  • Connect 5.75-foot (1.8m) long permanent eyelet ring terminal ends to functioning battery and 24.25-foot (7.4m) long alligat....
Check Stock

Yamaha THR10II Desktop Amp

  • Realistic tube-amp tones and feel plus essential effects.
  • 15 Guitar amps, 3 bass amps, 3 mic models for acoustic-electrics, and flat modes for everything else.
  • Bluetooth support for audio playback, editing via the remote, and more.
  • Hi-fi audio playback with extended stereo technology.
  • Plug-and-play USB connectivity for recording and playback.
  • The remote editor/Librarian app for desktop and mobile devices.
Check Stock

SX SBX III Stomp Box

  • Produces a sound similar to that of a bass drum when plugged into an amp and stepped on with foot..
  • Uses standard guitar cord. Will work with most guitar amps..
  • Allows user to create a simple rhythmic self-accompaniment..
  • New Version - Higher output and better bass response.- now with active circuit and 'thru' allowing user to play guitar and stomp box with a single....
  • For the best possible sound. Use through a bass amp, or an EQ with the treble turned all the way down..
Check Stock

Kicker 6.75 Inch Comp RT Thin Woofer Includes Two 48CWRT672 2 Virtual 2 ohm Package

  • Bundle includes: 2 Kicker 48CWRT672 CompRT 6.75" Subwoofer.
  • 48CWRT672 - High Mass, Solid Pole Piece for Superior Heat Dissipation.
  • 46CXA8001 - Variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want.
  • 47VK6 - Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables.
  • Optional subwoofer grilles and remote bass controllers available.
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • Power – This Class A/B 1400 Watt Car Amplifier has a power rating distribution as followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease....
Check Stock