ReviewsCar Bushing Removal Tool

OEMTOOLS 25311 Automotive Window and Door Clip Remover and Installer, Auto Door Panel Removal Tool, Door Panel Clip Tool

VERSATILE: This clip removal tool works on a variety of different models including GM, Ford, and other vehicles using the “C” type clip.
You can use this auto trim removal tool set again and again for many different jobs.
PREVENTS DAMAGE: While trying to remove things like window cranks and window clips, it is easy to damage windows and doors.
You don't have to worry with this panel removal tool.
Our car clip remover will not cause damage to any car parts.
EASY APPLICATION: This fastener removal tool is easy to use.
Just slip the tool between the two pieces you are trying to separate such as the window crank and the door panel.
Wiggle the car door removal tool around, then, lift.
QUALITY MATERIALS: This car clip removal tool is composed of metal that won’t break or bend during use.
It is thin enough to reach in tight spaces and durable enough not to break.
Unlike plastic tools, this panel clip removal tool is built to last.
SPECIFICATIONS: This door panel removal tool measures 13.9” x 4.7” x 2.4”, making it easy to fit into tight spaces.
Because this tool only weighs 5.6 ounces, it is easy to carry around to different jobs or different areas in the same car.

Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

[Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
[Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
Ball joint compressor control arm bushing press kit may even fit your tractor.
[Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
Ball joint kit will endure years of heavy use.
[Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
[Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....

Check Stock

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)..
CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (2....

Check Stock

Orion Motor Tech OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC and Jeep vehicles)..

Check Stock

FOSHIO 3pcs Metal Trim Removal Tool, Auto Fastener Remover Pry Tool, Easy Removal of Car Door Panel, Audio Radio Panel, Molding, Dashboards and Wheel Hubs

3 TRIM REMOVAL TOOL KIT: Package includes 3 pcs different size metal car door panel removal tool. It is designed with care to be universally applicable to vehicles, boats, RVs, etc..
SAFETY AND DURABLE: These auto trim tools made of metal plate, high quality material with heavy-duty construction for durability, the pry tool would not break during use..
UNIVERSAL TRIM REMOVAL TOOL: The pry tool without scratching or damaging your car. Auto trim removal tool set perfect for removing exterior & interior trim, door panels, audio & radio panel, moldings, dashboards, wheel hubs, window trims , emblems, etc..
EASY TO CARRY: The car trim removal tool is compact size, convenient to store or carry with in your car. The repair tools to be easily handled to effectively save effort and time while working..
100% GUARANTEE: All our trim tool enjoy a lifetime of after-sale service. We firmly believe you'll love our trim removal tool kit, and if you aren't absolutely satisfied, return them within 60 days for a refund. We provide 100% satisfaction guarantee, pls contact with us if ....

Check Stock

Quadratec Delrin Replacement Door Hinge Bushing Set - Fits Jeep Wrangler JK, JL 2-Door 2007-2022 - Synthetic Replacement Bushings - Lasts Longer than Factory Metal Bushings

SMOOTHS DOOR OPERATION - Over time your factory doors may not open and close as smoothly as they used to because the factory bushings are metal and wear out over time. Replace corroded and worn out door hinge pin bushings with our replacements.
LONG LASTING - Made from genuine DuPont Delrin, our synthetic door hinge bushings will never rust and will outlast the faulty factory metal bushings.
SNUG FIT - Our improved door hinge bushing design provide a snug fit while allowing your doors to open and shut smoothly.
EASY INSTALLATION - Door removal will never be any easier. Simply tap out your corroded factory bushings using the included aluminum removal punch. Our new bushings are precision machined to press into place by hand or a gentle tap.
INCLUDES - The Replacement Door Hinge Bushing include replacement bushings for the door hinges, removal tool and detailed installation instructions. The option with the EZ-ON Door Pin Guides helps to get your doors back on quickly & cleanly.

Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..

Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....

Check Stock

Okyfree Car Lockout Kit, Car Door Opener Kit Include Air Wedge Bag Pump Professional Automotive Trim Removal Tool Suitable Car Unlock Set Kit for Most Cars.

【Car Lockout Kit】: Lockout kits for vehicles include 1pcs expert long reach grabber, 1pcs red non marring wedge, 2pcs airbag jack, 4pcs car panel door audio trim removal tool, 2pcs fastener remover pry tool..
【Long Reach Grabber】: The product is made of high quality solid stainless steel, sturdy and resistant to oxidation, the surface is smooth and not easy to curve. After assembly, fix one end and the other end will be tightened by turning clockwise, so that it will not loosen.The long reach tool car lockout helps you to open the car door and get the keys..
【Airbag Jack】: Airjack car opening kit contains two different sizes of products. It uses a double TPU reinforced airbag that can withstand high pressure. The air jack lockout kit ensures no damage to the door and is versatile.It will be a good help for you when you renovate your house.
【Trim Removal Tools】: Includes 4pcs car panel door audio trim removal tool, made of thick hard plastic, so that the removal will not pose harm to your car. 2pcs fastener remover pry tool, made of carbon steel design ergonomic, labor-saving and comfortable.Trim removal tools will not cause damage when removing car dashboards, stereos, etc..
【Ease of Use】: Lockout kits for vehicles are quick to assemb....

Check Stock

Tbest RC Rear Axles Bushing, Stainless Steel Rear Axles Bushing with Sleeve for Wraith RR10 90048 90053 1/10 RC Axial Car

★ PREMIUM MATERIAL: The RC rear axles bushing is made of high quality stainless steel, which has high strength and durability, and not easy to deform..
★ CONVENIENT TO INSTALL: Exquisite appearance, stable performance, easy installation and removal. Easy and convenient to use, ensure good performance of the car..
★ WONDERFUL REPLACEMENT: A direct replacement for the old or broken one, great match to your vehicle model..
★ DESIGNED FOR: The rear axles bushing is especially designed for Wraith RR10 90048 90053 1/10 RC axial car..
★ GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon..

Check Stock

manfiter 148Pcs Trim Removal Tool Pry Kit Car Panel Tool Radio Removal Tool Kit Auto Clip Pliers Fastener Remover Pry Tool Kit Car Upholstery Repair Kit Prying Tool Kit with Storage Bag Red

【148PCS Cost-effective & Multifunctional】 With one purchase, you can get a cost-effective total of an automotive trim removal tool set that meets all your trimming needs. Manfiter 148pcs trim removal tool kits with high-quality works great for removal and install of car, boat, RV, truck or furniture decoration, including car radio, car stereo, door and panel, interior repair, furniture repair, plastic trim, clips, fasteners, upholstery, etc..
【Sturdy Durable & Easy for Storage】 This trim removal tool kit made of polyformaldehyde material with matte surface treatment, which is eco-friendly, non-toxic, lightweight, gentler, and tougher than the common ABS ones. In addition, package also comes with a portable zipper bag for easy access and storage. Great gift for husband friend or family..
【22 Upgrade Panel Removal Tools】 Upgrade upholstery fastener removers with a thickening rubber washer that are easy to hold in hand. Trim removal tools are gentler on softer surfaces and do not scratch your car. Universal stereo removal tools aimed to disassemble most of the car stereos. Extra 10 pcs adhesive wire clip for car body wiring routing and help organize cable..
【Fastener Removal With Car Retainer Clips 96Pcs】 Made from impact-resistant ....

Check Stock