ReviewsCar Crankshaft

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

...cessed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch shaft adapter 7/8 to 1 crankshaft adapter.

Check Stock

Thomas & Friends All Engines Go: The Mystery of Lookout Mountain

【PRODUCT FEATURES】Quality water pump automotive product to make your car safe. The crankshaft to ensure that the pistons and valves operate together in proper sequence, helps the motor run properly and enhances fuel efficiency.
【Compatible】Water pump timing belt kit fits for Honda Accord Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.

Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
Continue tightening system into place with hand wrench (not included) and remove installer assembly.
CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....

Check Stock

Crankshaft, 69mm, Forged Chromoly, 8 Dowel, VW Journals, Compatible with Dune Buggy

Complete crankshaft, Connecting rods, Wrist pin bearings, Main bearings and seals sold separately for single-cylinder crankshaft.
Fits: Ranger 570 Crew EPS Full-Size 2015, 570 Crew Full-Size 2015, 570 EPS Full-Size 2015, 570 Full-Size 2015-2018, 570-6 Crew 2016-2017, Crew 570-6 2018, RZR 570 2012..
Meets or Exceeds OEM Specs for Fit and Performance.

Check Stock

Dyno Proven: 50 HP With One Bolt-On! Engine Masters Ep. 1

【PRODUCT FEATURES】Quality water pump automotive product to make your car safe. The crankshaft to ensure that the pistons and valves operate together in proper sequence, helps the motor run properly and enhances fuel efficiency.
【Compatible】Water pump timing belt kit fits for Honda Accord Pilot Odyssey Ridgeline Crosstour Acura TL V6 and also Acura RDX MDX RL TL TSX ZDX. Not applicable for 2015 Hond Crosstour （belt oe: 31110-5G0-A01）.
【Kit Include & Replacement OE】1 x Timing Belt (oe: 14400-RCA-A01), 1 x Tensioner Roller (oe: 14510-RCA-A01), 1 x Hydraulic Tensioner (oe: 14520-RCA-A01), 1 x Idler Pulley (oe: 14550-RCA-A01), 1 x Front Crankshaft Seal (oe: 91212-R70-A02), 2 x Camshaft Seals (oe: 91213-R70-A01), 1 x Serpentine Drive Belt (oe: 38920-RCA-A01, 6PK2135), 1 x Water Pump & Gasket (oe: 19200-RDV-J01).
【Special Reminder】If the belt is damaged, it may be due to one of the two gears stop working and the tension on the other side causes breakage, don't worry, please contact us in time to help you solve the problem together.

Check Stock

Ford 1965 Mustang V8 Engine Model Kit - Working Model Motor with Collector's Handbook

...ough model with moving parts, spinning fan and light up sparkplugs - watch all the parts of this scale model motor move while listening to the original Ford Mustang engine sound recording from an actual firstFirst generation Ford Mustang Engine - See the red LED sparkplugs light up in the running motor model as the crankshaft turns and the fan spins - motor model assembly only takes a couple hours.
Complete with exclusive collector’s manual with Ford archive material and model history - detailed instructions and Ford Mustang history - all about the first generation Mustang - learn all about this classic American muscle car as you build the working model engine kit.

Check Stock

Ford 1965 Mustang V8 Engine Model Kit - Working Model Motor with Collector's Handbook

1:3 scale model high performance type-K-code 1965 Ford Mustang V8 engine – 200-part model engine kit – No glue required assembly – this working model car engine is a great example of a classic v8 American muscle car engine from the 60’s.
Sound module with first gen Ford Mustang V8 engine sound – model engine kit includes detailed instructions – build a classic car model engine – this car model for adults is the perfect educational gift for any car lover or gearhead –.
Transparent engine model – see through model with moving parts, spinning fan and light up sparkplugs – watch all the parts of this scale model motor move while listening to the original Ford Mustang engine sound recording from an actual firstFirst generation Ford Mustang Engine – See the red LED sparkplugs light up in the running motor model as the crankshaft turns and the fan spins – motor model assembly only takes a couple hours.
Complete with exclusive collector’s manual with Ford archive material and model history – detailed instructions and Ford Mustang history – all about the first generation Mustang – learn all about this classic American muscle car as you build the working model engine kit.

Check Stock

Powerbuilt Crankshaft Crank Pulley Removal Tool 50mm Holder Remover and Installer Socket Wrench Honda and Acura - 648796

For removal and installation of crankshaft pulley bolt on most Honda and Acura engines.
Hexagonal shape fits hole in center of crankshaft pulley.
Prevents engine from turning when held with breaker bar.
Hole in center allows socket access to crankshaft pulley bolt.
Package includes usage instructions and photos.

Check Stock

OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys

...ces both easy to find and easy to store.
Never worry about losing pieces with this harmonic balancer puller set.
EASY TO USE: Assemble the threaded rod nut bearing with the bearing facing away from the hex.
Insert the threaded rod through the balancer and fastener into the crankshaft.
Use a second wrench to rotate the assembly.
EFFECTIVE: The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers.
This harmonic balancer puller kit both reduces the risk of stripping threads inside the crankshaft and the risk of breaking crank bolts.

Check Stock

44mm / 1.7in Crankshaft Assembly Half Circle Crankshaft Engine Parts Replacement Accessories Fit for Mini Pocket Bike 47cc 49cc

Keyed Crankshaft 3/4 Inch 3/16 Inch Keyway.
This item will not work for GENERATORS or other engines that have a TAPERED Crankshaft.
Fitment:for Predator 212cc, For Honda GX200, Go Kart & mini bikes.

Check Stock

For Power stroke 6.7L Front and Rear Crankshaft Seal Installer Remover Master Set Fit for 2011-2021 Ford Super Duty Diesel F-250 F350 F-450 F-550 F-650 F-750 Alt to 303-1509 303-1514 303-1513 303-1510

Function -- This is a master tool set that can remove and install all the front and rear crankshaft seals. This professional tool set will absolutely save your time and energy to do the work. They are same or exceed the OEM function and quality..
Fitment -- Fits for 2011-2021 Ford Super Duty F-250 F-350 F-450 F550 equipped for Power Stroke Diesel 6.7L and 2016-2021 Ford Super Duty F-650 F-750 equipped for Power Stroke Diesel 6.7L..
Include -- 1 * 303-1509 & 303-1509-01 6.7L Front Crankshaft Seal Installer Tool Alt ST-137B. 1 * 303-1510 6.7L Front Crankshaft Seal Remover Alt ST-152. 1 * 303-1514 6.7L Rear Crankshaft Seal Installer Alt ST-138. 1 * 303-1513 6.7L Rear Crankshaft Seal Remover Alt ST-148..
Material -- Made of premium heavy-duty hard steel with black coated for rust and corrosion resistance, hardened construction for high strength and impact resistance, this tool is top quality and durability that can serve for a much longer time..
Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..

Check Stock