ReviewsCar Crossover

DS18 TWPZ Piezo Super 80 Watts Micro Dome Tweeter - Set of 2

  • Perfect sound available together with your woofers, these tweeters have a built-in Crossover, Micro dome inside, no magnetic field, and work with all car audio systems.
  • Sensitivity: 101 decibels, frequency response: 3.5 - 20Khz, Crossover frequency: 5, 000 hertz.
  • High-powered tweeter delivers 80 watts of power.
  • Accessories included: 2 angle mounts, 2 surface mounts, 2 regular angle mounts, 6 mounting screws, 2-self-adhesive disk.
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • Features: Pair MB Quart FSB216 6.5" 280 Watt Component Car Speakers. RMS Power Handling: 70 Watts (Per Speaker) / 140 Watts (Per Pair). Peak Power Handling: 140 Watts (Per Speaker) / 280 Watts (Per Pair). Speaker Impedance: 4 Ohms. Frequency Response: 55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
  • Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling S....
Check Stock

200W Pure Bass Subwoofer Crossover Second-Order Crossover Frequency Distributor Divider 2 Way Speaker Audio Crossover Filter

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • 2-Way Crossover Filters Frequency Distributor.
Check Stock

ALPINE S-A32F 320w RMS 4-Channel S-Series Car Audio Amplifier Class D+Amp Kit

  • ...e. Small footprint for easy installation. Screw terminals (for speaker and power cables). General. Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Management Control. Top Mounted LED Power/Status Indicator. Speaker Level Input with remote turn on.
  • Crossover: Adjustable Low-pass (LPF) / High-pass Filter (HPF). Gain Control: Adjustable. Bass Control: Remote Bass Control (RUX-KNOB2) Ready. Max Power Output Ratings. Total Max Power: 640W. RMS Power Ratings. Per Channel into 2 Ohms, 14.4V (%THD+N): 4 x 80W. Per Channel into 4 Ohms, 14.4V (%THD+N): 4 x 55W. Bridged into 4 Ohms, 14.4V (%THD+N): 2 x 160W. Sound Tuning. Crossover: Variable LPF, 50-400Hz (-12dB/oct ). Crossover: Variable HPF, 50-400Hz (-12dB/oct ). General.
  • Power Requirements: 14.4 V.DC (9 - 16 V allowable). Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V. High Level Input with automatic power on. Cable size: Power Cable AWG 8, SPK Cable AWG 10. Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz - 30kHz. THD+N (@ 10W into 4 ohms): 98dB. Weight: 1.9 kg. Dimensions. (W x H x D): 8" x 8" x 2.25". Features:.
Check Stock

DS18 XM6LD 6-way Active Crossover - High/Low Pass, 2, 4, or 6 Channel Selector, with Remote Subwoofer Control - Perfect Frequency Distribution System Ensures Clarity and Peak Efficiency, BLACK

  • BALANCE ACTIVE SPEAKERS PERFECTLY - DS18's active crossover will help you divide frequencies with ease, making sure your tweeters, mid-range, and subwoofers all receive the correct levels every time..
  • UNCOMPROMISING FLEXIBILITY AND DESIGN - 6 channels with 2,4,6 channel selector. 12 channel /6 way RCA output at 11.5V. High/low/band pass crossover 12dB/Oct.
  • BASS KNOB INCLUDED - The XM6LD Crossover comes with a remote bass knob included. Always have control over the bass levels depending on what genre music you're listening to..
  • COMPETITION LEVEL CONTROL - You'll quickly see the advantages of an active crossover and why almost every competition-level car audio system incorporates this unit..
  • NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market..
Check Stock

Rockville CAR-EQ-Oke Car Audio 7 Band Equalizer w Bluetooth + Mic Input Karaoke

  • Features: Rockville CAR-EQ-OKE 1/2 Din 7 Band Car Audio Equalizer EQ w/ Microphone Input, Echo and Bluetooth, Bluetooth audio streaming from any smartphone or other Bluetooth-enabled device.
  • 7 adjustable bands of equalization (50Hz, 125Hz, 315Hz, 750Hz, 2. 2KHz, 6KHz and 12KHz), Each band is adjustable from -12dB to +12dB, Built in crossover, Subwoofer level controls.
  • Includes mounting brackets and screws for easy installation, Amazing quality with low distortion (Built with top quality components), Frequency response: 20Hz TO 20KHz +/- 1dB, S/N Ratio: 95 dB, Crossover Roll-Off: 12dB per octave.
  • Input impedance: 10K, Input sensitivity: 200mv per channel >7V, THD: 0. 01%, Input: 12V, Output: 12V, Power requirement: 11-16V DC, Unit dimensions in inches: 7. 08 x 5. 51 1. 26.
  • 7. 315 Hz control (+ or = 12 dB), 8. 750 Hz control (+ or = 12 dB), 9. 2. 2 KHz control (+ or = 12 dB), 10. 6 KHz control (+ or = 12 dB), 11. 12 KHz control (+ or = 12 dB), 12. Microphone volume control, 13. Microphone echo control.
Check Stock

Hifonics ZG-1800.1D ZEUS Gamma 1800w Car Audio Class D Mono Amplifier+Amp Kit

  • ...h minimal distortion, RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant, High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power, Operation Mode: Mono only.
  • Crossover Type: Onboard electronic crossover, Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers, Class/Topology: "Class D, High efficiency with big power in a small footprint, Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation, Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation..
  • Power Supply: Simpatico Coil Design, The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices, Output Connections: RCA Outputs, Daisy chain multiple amplifier to eliminate additional signal cables from the source unit, Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile..
  • Features of RWK41: 1 - 17' High Grade Twisted ....
Check Stock

Memphis Audio PRX10 Power Reference Series 1 Inch 50 Watt RMS 100 Watt Peak Power Tweeter Car Audio Speakers

  • CAR SPEAKERS: Upgrade your audio system to this high-performance 1-inch dome tweeter speakers.
  • POWERFUL PERFORMANCE: Powerful peak performance offers reliable service at 100 watts and 50 watt RMS.
  • CROSSOVER SYSTEM: Equipped with separate poly dome tweeter and separate crossover system.
  • ADDED PROTECTION: Butyl rubber surround adds protection to speakers.
  • AUDIO UPGRADE: Perfect for OEM factory applications for audio upgrade.
Check Stock

150W Frequency Divider 4~8 Ohm Ajustable Treble/Bass 2-Way Speaker Audio Crossover Filter for Subwoofer HiFi Speaker Home Car Audio Set DIY (2700Hz)

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • Pure Bass Subwoofer Second-order Crossover Frequency Divider.
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • ...1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover: Variable Low-Pass / High-Pass. Green/red status LED. 2 pair RCA pre-inputs. Max Power Output Ratings. Total Max Power: 600W. RMS Power Ratings.
  • Per Channel into 4ohms (%THD+N): 4 x 50W. Per Channel into 2ohms (%THD+N): 4 x 70W. Bridged into 4ohms (%THD+N): 2 x 130W. Sound Tuning. Crossover Frequency (Variable, OFF/LPF/HPF Selectable). 1/2 Ch: LP/HP: 50Hz 500Hz. 3/4 Ch: LP/HP: 50Hz 500Hz. EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only). Dimensions. 12.99" x 2.04" x 9.44". General. Power Requirements: 14.4 V DC (11 V to 16 V). Input Sensitivity: 0.2 - 8.0 V.
  • Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB). Speaker Impedance: 4 or 2 Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB. Features: RockvilIe RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit. (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge Translucent Blue SuperFl....
Check Stock

Hifonics Monoblock Car Amplifier – Gemini Series Class D Amplifier 2000 Watt, Car Electronics Audio Subwoofer Bass Boost 1 Ohm Stable MOSFET Power Supply for Car Speakers Mono Sub Amp

  • ...ircuitry as a part of its design. It also comes with a high grade aluminum sink and Ultra-Fi Mosfet power supply..
  • Features – The monoblock bass boost car amplifier has features like - Frequency Response: 10~500HZ, Bass Boost, High/Low Level Inputs, Subsonic Filter: 10 – 40HZ, Remote Bass Knob, Variable Low Pass Crossover: 40Hz-300Hz, Phase shift: 0-180 Degrees.
  • RCA Ports - The RCA Jacks in this bass boost monoblock car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca jack to feed the next amp.
  • 1 Ohm Stable - This Hifonics Gemini Series Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
Check Stock