ReviewsCar Wheel Bolts

ECCPP 513121 Wheel Bearing Hub Front Wheel Hub and Bearing Assembly Allure, Aurora, Bonnevile, Century, Impala 5 Lug W/ABS

  • WHEEL HUBS PARAMETER - OE 513121,5 lugs,Front Axle,ABS System,Flange Diameter: 5.80 In., Bolt Size: M10x1.25, Flange Offset: 2.007 In..
  • VEHICLE COMPATIBLE - Hub assembly fits for 1997-2001 Chevy Venture 2004-2005 Pontiac Bonneville 1997-2003 Pontiac Grand Prix 2000-2003 Pontiac Bonneville 2003-2005 Pontiac Montana 2002 Pontiac Montana 1999-2001 Pontiac Montana 1997-1998 Pontiac Trans Sport.
  • MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
  • SERVICE WARRANTY - 1 year warranty, support replace, r....
Check Stock

Genuine Yamaha YFZ450R YFZ450X GYTR Plastic Frame Skid Plate 18PF84N0U000

  • Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
  • The extruded U-nuts can be used to replace/fix to the bumper.
  • The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine....
  • Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details).
  • Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION....
Check Stock

STIMULATER 6 x 5.5 Wheel Spacers with 108mm Bore Forged 6x139.7mm and 1” Hub Bore Thickness Fit 6 Lug Wheels for Tacoma 4Runner Tundra FJ Land Cruiser(4pcs, Blue)

  • Specification:Set of 4 wheel spacers.Thickness: 1 inch / 25mm.vehicle bolt pattern: 6 x 5.5 Thread Pitch:1/2-20.center bore 4.25”/108mm.The spacers is mounted on 6 Lug Wheels to make it stronger and less likely to come loose..
  • Durable:Made of 6061-T6 aircraft-grade solid aluminum.This ensures that the wheel Spacers will not easily deform under high pressure and external forces when driving. 10.9 grade bolts also prevent the bolt to break suddenly when the car is running at high speed..
  • Compatibility:This wheel spacer is suitable for vehicles with vehicle Bolt Pattern 6 x 5.5 / 139.7mm.Such as 1988-2013 4Runner, fit for 2007-2013 FJ Cruiser, fit for 1988-1997 Land Cruiser, fit for 1987-1995 Pickup, fit for 2001-2007 Sequoia, fit for 1994-1998 T100, fit for 2005-2013 Tacoma 6 Lug Vehicles ONLY,fit for 2000-2006 Tundra. Please check the specifications of the car and wheel Spacers before purchase to prevent the consequence that it cannot be installed..
  • Effect:Increase tire clearance,could install a wider, larger, or high traction tires. Make your vehicle looks more awesome and give you a better driving experience. Wheel Spacers also provide better stability when riding in steep slopes or rough terrain..
  • Warranty:We offer a one-year quality guarantee for ou....
Check Stock

2pcs 5mm Hubcentric 4x114.3 Wheel Spacers (66.1mm bore) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra Cube (4x4.5)

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 4/114.3 (4/4.5") bolt pattern and 66.1mm Centerbore. Compatible with Nissan 84-88 200SX, 88-94 240SX, 95-98 240SX Base Model, 240Z (Rear Hub), 260Z (Rear Hub), 280Z (Rear Hub), 280ZX (Rear Hub), 84-86 300ZX. Compatible with Nissan 93-01 Altima, 09-11 Cube, 85-88 Maxima, 00-10 Sentra. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing....
Check Stock

The ROP Shop | Deck Wheel with Bolt & Nut for Simplicity 1312G 1691677, 1312H 1691679 Tractor

  • Model Name:Car Wheel Nuts Cover For Citroen Peugeot.
Check Stock

ECCPP Front Wheel Hub Bearing Assembly 5 Lugs w/ABS for 08 09 10 11 12 13 14 Dodge Avenger Caliber Compatible with 513263 HA590219 Driver and Passenger Side

  • WHEEL HUBS PARAMETER - OE 513263, 5 lugs, Front Axle,ABS System,Flange Diameter: 5.562 In.,Bolt Size: M12x1.5,Flange Offset: 1.916 In..
  • VEHICLE COMPATIBLE - Hub assembly fits for 2011-2014 200, 2007-2010 Sebring, 2008-2014 Dodge Avenger, 2009 Dodge Caliber.
  • MAIN FUNCTION - hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. high quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
  • SERVICE & WARRANTY - 1 year limited warranty, support replace, return and refund service.
Check Stock

StanceMagic - 5mm Hubcentric 5x114.3 Wheel Spacers (67.1mm Bore) Compatible with Hyundai Genesis Tiburon Veloster, Kia Optima, Mazda 3 5 6 MX-5 Miata RX-8 Protege Mitsubishi Jeep (2 Pack)

  • StanceMagic Flat Hubcentric Wheel Spacers for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 67.1mm Centerbore. Compatible with Mazda 3, 5, 6, CX-3, CX-5, MX-5 Miata, RX-8. Compatible with Hyundai Genesis, Tiburon, Veloster. Compatible with Genesis G70, G80, G90, GV70, GV80. Compatible with Mitsubishi. Compatible with Kia Optima, Stinger. Also compatible with Jeep Compass, Patriot. Check Year/Make/Model in Description. May fit others, verify using spacer specs..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 67.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIA....
Check Stock

Aootf Black Anti Theft License Plate Screws- Stainless Steel Rustproof Security Bolts Fasteners for Front Rear Car Tag Mount- M6 (1/4\) Locking Hardware, with Matte Caps Inserts Nuts, Rattle Proof Pad

  • ...e the noise of plate vibration and prevent scratching the car paint. Car accessories gift- black tire valve caps are made from aluminum alloy, provide an enhanced seal to avoid leakage and properly keep away from dust, dirt, grime and road debris. Designed in general size, 10*16mm, can be installed on many tires or wheel air valve stems..
  • Reminder:This is a black license plate screw kit, if you received the wrong item (such as license plate frame), it may be because Amazon warehouse mixed up our products, please feel free to contact us for a free replacement. If you are not satisfied with our products, or the screw size does not fit your car license plate, please feel free to contact us, we can provide you with a refund or send replacement screws for free. Please buy with confidence!.
Check Stock

ECCPP New Front Wheel Hub Bearing Assembly 515003 fit for Ford Explorer (Sport Trac) Ranger, Mercury Mountaineer, Mazda B3000 B4000 4WD w/ABS 5 Lug 3 Flange Bolt 2pcs

  • COMPATIBLE VEHICLES - wheel hub bearing assembly for 1995-2001 Ford Explorer front wheel hub,2001-2005 Ford Explorer Sport Trac hub bearing,2000-2009 Ford Ranger front wheel bearing, 2001-2002 Mazda B3000 front bearing,2000-2009 Mazda B4000 bearing assembly,1997-2001 Mercury Mountaineer hub assembly.
  • FEATURES - ECCPP'S wheel hub bearing assembly fits for the front location, 5 Lugs with ABS, 3 Flange Bolt, replace OE 515003.
  • MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protectiv....
Check Stock

5mm Hubcentric 5x4.75 Wheel Spacers (70.5mm Bore) Compatible with Buick Cadillac XLR Chevrolet Blazer Corvette Camaro GMC S15 Pontiac GTO Tans Am Phoenix Trans Sport 5x120 5x120.65 2pcs

  • StanceMagic Hubcentric Wheel Spacers for vehicles with 5/120.65 (5/120.7 or 5/4.75") Bolt Pattern and 70.5mm Centerbore. Compatible with Chevrolet 1987-2005 Blazer, 1982-2003 Camaro (Rear Hub), 1984-2020 Corvette, 1982-2004 S10 (Rear Hub). Compatible with GMC 1982-1991 S15, 1991-2005 Jimmy, 1990-2004 Sonoma (Rear Hub). Compatible with Pontiac 1984-1997 Trans Am, 1990-1997 Trans Sport. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x120.65 (5x120.7 or 5x4.75") | Hub Center Bore: 70.5mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardwa....
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock