ReviewsCarbide Bar

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Making Wooden Toys: 12 Easy-to-Do Projects with Full-Size Templates (Dover Woodworking)

  • Highest quality lathe woodturning tools 100% designed and manufactured in the USA.
  • Accepts specially designed proprietary replacement carbide cutters.
  • Never sharpen again. Cutters have multiple sharp sides. Carbide stays sharp much longer than steel.
  • 8.5” by 1/2” square CNC machined stainless steel bar.
  • Greatly simplifies learning curve when turning. No complicated angles to learn and remember..
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

Wood Turning tool Carbide Tipped Working Lathe Tools Combo Set Include Finisher Rougher Detailer For Pen Bowl Making,Set Of 3

  • Combo Set Include: 3 Pieces Wood Turning Tools(Mid Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key.
  • Dimension:Length of Tool Bar 5.91″(150mm) ,Length of wood handle:9.84″(250mm ),Overall length 15.75″(400mm).
  • Indexable Replacement carbide insert design:matched with Carbide Cutter (Square15×15 × 2.5mm-R50-30°,Round 12 × 2.5mm-30°,Diamond 10×28mm with Radius Point).
  • Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening,for wood hobbyist or DIY or carpenter.
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock

Men's Tungsten Black Bar Pendant Necklace with 22 Inches Stainless Steel Snake Chain

  • 2 pcs tungsten steel bar pendant necklaces for couples and lovers, 1 silver bar necklace and 1 black one, friendship necklace for boys and girls, gorgeous pendant chain for people who like clean and simple design, Easter gifts for kids.
  • Material: tungsten carbide, tungsten steel is known for its super hardness & flawless quality, the hardness is about 4 times over titanium steel, great material for long lasting jewelry without any fading or scratches. The density is about 1.5 times over titanium steel, it makes the pendant having a good weight to it. Hypoallergenic and outstanding tarnish resistance. Tips: the super hardness of tungsten carbide pendant lead to impact toughness declining, so please avoid falling down and impact..
  • Pendant measurements: Height 1.7"(42mm), Width 0.2"(5.6mm), Thickness 0.2"(5.6mm), Weight 0.56oz(17g). Comes with 1.5mm x 22" snake chains.
  • Minimalist design, simple and clean, less but better, goes with almost any outfits by a chic dose of low-key gorgeous.
  • Package with MOO&LEE branded velvet gift pouch(2pcs). To share the couples necklace with your significant other for Birthday, Anniversary, Christmas, Valentine's Day, etc..
Check Stock

findmall 8 Pcs Indexable Boring Bars Set,3/4 Shank,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pcs TCMT21.51 & 4 Pcs TCMT221,with Alumium Carrying Case

  • Product - Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use..
  • Parameter - Positive Rake 90Degree Lead, Uses 0.050 key, C6 grade: carbide for steel and alloy steel..
  • Function - Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips..
  • Feature - Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert..
  • Application - Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine..
Check Stock

RIDGID 72327 418 Oiler Gun, All-Weather Pipe Threading Oiler Gun with Simple 2-Finger Trigger Design, heavy-duty 1-Gallon Capacity Reservoir and Handy 54-Foot Hose,Silver,Small

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN:B07RB5BKG7】,16IR AG60【ASIN:B07S1WSNJ6】.
Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

  • Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
  • Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
  • Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
  • Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
  • no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
  • Designed and Manufactured 100% in the USA.
Check Stock

1/2\ 5/8\ Boring Bar SNR0013M16+SER1616H16 Lathe Internal Threading Inserts Turning Tool Holder with 5pcs 16ER AG60+5pcs 16IR AG60 Carbide Turning Inserts

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN:B07RB5BKG7】,16IR AG60【ASIN:B07S1WSNJ6】.
Check Stock

Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

  • Very durable 8 in. 42-teeth saw blade used for cutting metals (steel studs, angle iron, flat bar, channel, EMT conduit, all-thread). Max RPM of 9000..
  • Cermet and carbide blend teeth cut metals.
  • lasts 3x longer than a standard carbide blade.
  • Laser-cut stabilizer vents trap noise and vibration.
  • Triple chip metal cutting grind provides durability and burr-free cuts.
  • Spark free blades are "hot work" compliant (may not need to obtain a hot work permit on jobsites depending on local laws).
Check Stock