ReviewsCarbide Cutting Tools

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..

Check Stock

6pcs Universal Carbide Oscillating Saw Blades HEMUNC Mixed Multitool Saw Blades Semicircle Triangular Finger Kit for Tile Grout Mortar Concrete Masonry

✔The Oscillating Multitool Carbide Grit Finger Rasp Blade with Universal Fit System is a great multitool blade attachment for hand....
✔The Oscillating Multitool Universal Fit Carbide Grit Semicircle Blade allows you to cut into concrete and defective tile joints with its brazed....
✔ The oscillating Multitool Triangle Carbide Rasp is ideal for cutting trim and other grinding projects. The triangle edge makes it easy to sand in....
✔ Our carbide oscillating saw blades are compatible with many oscillating tools including Fein Multimaster, Bosch, Dremel, Ryobi, Hitachi, Chicago,....
✔ There are 3 types and 6pcs carbide oscillating tool blades, which are suitable for cutting and grinding objects like concrete, grout, tile,....

Check Stock

Wood Turning Tools Rougher Carbide Tipped Lathe Chisel Tool Bar 19.68 Inches With 14mm Straigt Edge Square Carbide Insert for Wood Hobbyist or DIY or Carpenter

❶【8 Models Carbide Cutters Inserts Satisfy All Your Demands】: Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point. Supplied with Screws..
❷【Sphere Of Application】: Perfect for finish the curved, concave surfaces , hollower jobs and for general wood turning applications. This combination will give you a replacement carbide inserts for most woodturning tools..
❸【Durable Tungsten Steel Material】: Made of solid tungsten steel - Provides the best combination of sharpness and durability. It is polished to a mirror finish for smoother cutting and longer tool life..
❹【Suitable For All Levels Of Carpentry Workers】: This is a free combination suit that meets the needs of roughing and finishing cutting. Suitable for both professional carpenters and beginners..
❺ All the carbide turning inserts cutting tools are supplied with screws..

Check Stock

Drill America - DAM18X1/4 1/4' x 18' Carbide Tipped Masonry Drill Bit, Dam Series

Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness.
Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
Round shanks allow use with a wide variety of toolholding systems.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Designed for use in portable electric drill.

Check Stock

Lathe Boring Bar SNR0012M11+SER1212H11 Turning Tool Holder Lathe Internal Threading Inserts with Turning Inserts 5pcs 11ER AG60+5pcs 11IR AG60 Carbide

【CNC Threading Inserts】: 16ER AG60 carbide inserts length: about 16 mm.
5pcs/pack with a plastic box for convenient storage. Used for turning and finishing on a wide range of materials..
【Advanced PVD Coating】: Made of solid carbide with high performance PVD coated, which has excellent wear resistance and smooth on face, so it can offer long tool life and faster cutting..
【Accurate Threading】: Professional chip-breaker design, provides perfect cutting performance and high accuracy. Also Smooth rake face design makes the chip removal more fluency..
【Widely Application】:Tungsten carbide threading inserts good for Low carbon steel, medium-carbon steel, high carbon steel, alloy steel , adjusting quality steel, stainless steel, cast steel, cast iron, aluminium alloy and copper alloy machining..
【Satisfaction Guarantee】:TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..

Check Stock

HUHAO 3PCS Carbide Engraving V Groove Bit 2 Flute Straig 6mm Shank 0.4mm Tip 15 Degree CNC Router Tool Blade for Steel Brass MDF Wood

An exceptionally durable tool bit for lasting longer than other engraving tools when engraving metal.
Metal engraving tools,Premium carbide,CNC engraving router bits set,Cutting tool for steel brass MDF wood,6mm shank,Pyramid,2 flute,Woodworking.
Designed with a sharper cutting edge that provides a cleaner cut when cutting aluminum and brass,Unique V design maximizes the tip strength by removing the minimum amount of material from the end.
High precision grinding and great concentricity for reducing chance of burr and deviation.

Check Stock

Carbide Burr Set, Tinpec Double Cut Cutting Burrs with 1/8\ Shank & 1/4\ Head, Tungsten Steel Die Grinder Bits for Woodworking, Drilling, Metal Carving, Engraving & Polishing – 10PCS

✔【DIE GRINDER Cutting Burrs】: Carbide burrs casted from Tungsten Steel with amazing HRA003e85. Cutting Burr Demensions: Length:45-50mm, Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
✔【SHARP DOUBLE CUT】: With grooves evenly crossed, Tinpec double cut cutting burrs are 2x sharper and faster, perfect for all materials like wood, plastic, steel, stone, ceramic and aluminum..
✔【1/8” Shank】: With widely adopted 1/8” shank, Tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools. Fast and smooth centering with the three jaw chuck..
✔【LONG SERVICE LIFE】: Thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel..
✔【PROJECT HELPER】A clear storage case comes with the carbide burr set for easier storage and access. A smart choice for your DIY, engraving, polishing, woodworking and carving projects..

Check Stock

Amana Tool 217013 Solid Carbide Dowel Drill Bit Through Hole Boring Drill Bits 3mm D x 70mm Long x 10x25mm SHK Right Hand

DOWEL DRILL BIT – The Through Hole Solid Carbide Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods..
DESIGNED FOR – This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill..
CREATE CLEAN HOLES – Use the dowel bit to create clean, straight, and accurately sized holes in wood..
SOLID CARBIDE-GRADE – Special solid carbide through hole boring bit made for long-lasting cutting edge performance and tool life..
INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..

Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display....

Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..

Check Stock

Glass Cutter Kit with Booster Bar Assist, Ideashop 8PCS Professional Glass Cutter Tool Kit Include 2-6 mm, 6-12 mm, 12-20 mm Glass Cutter Head with Flat Glass Pliers for Cutting Mirror and Glass

...lever. Just put the glass cutter into it through simple assembly, it can help you complete the perfect 45° tilt during the cutting process. Anon-slip and comfortable booster bar help you work more effortlessly and easily..
【AUTOMATIC LUBRICATION SYSTEM】- Oil glass cutter comes with 3 different sizes of cemented carbide cutting heads for different thicknesses. Include a screwdriver for installing and replacing cutting heads. Unique designed glass cutter oil output system has spring inside, when cutting starts, automatic oil distribution system will keep the cutting wheels lubricated to make the cutting smoother. Oil droppers help you to accurately refill when the oil runs out..
【COMPLETE AUXILIARY TOOLS】- Carbide engraving pen helps you draw clear lines on hardened materials effortlessly and is an essential auxiliary tool. Push-button pen design, easy to carry, tungsten carbide tip, high hardness, high strength. Pen tip comes with a protective cap, used for idle, safe and scratch-proof..
【SPECIALLY MATCHED GLASS PLIERS】- 8-inch flat glass pliers are made of high-quality high-carbon steel, high hardness and high wear resistance. It is an indispensable tool in the final step of cutting, and we have prepared them for you. It is suitable for cla....

Check Stock