ReviewsCarbide For Construction

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

Carpenter Pencil Set Carpenter Scriber Marking Kit Including 3 Pieces Carpenter Pencils with Replaceable Marker Refills Gold Carbide Scriber Tool Red Automatic Center Hole Punch for Construction Tools

  • ... on the job as strike force can be increased or decreased with the adjustable red cap, and the knurled non slip surface and precision centered tip increases force control for more accurate and precise holes in your projects, which can mark points precisely and accurately in various materials.
  • Quality material: these construction carpenter pencils are made of plastic and metal material, which are sturdy and practical to use.
  • The pencil is 2B refills, which is grease and stronger for you to use for a long time.
  • The materials and the features make the construction carpenter pencil a nice woodworking pencil tool for architecture and bricklayers and any other disciplines.
Check Stock

Bosch CBCL1260M 12 In. 60 Tooth Edge Cordless Circular Saw Blade for General Purpose

  • USE WITH: Optimized for any 12" miter saw or slide miter saw.
  • VERSATILITY: Best for fast cross cutting, cutoff and trim of wood and plywood.
  • PRECISION: SpeedCoat antifriction finish for faster and effortless cutting.
  • DURABLE: Blades are designed for tough construction jobs, because they are engineered with Brute Carbide, an upgraded C3/C4 micrograin carbide formulation that increases impact resistance.
  • LONGEVITY: Bosch cordless blades are optimized for cordless cutting, with reduced kerf for speed, less waste, and extended battery life.
Check Stock

Saw Reciprocating - Reciprocating Saw Cut Through Metal Saws - Power

  • [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades.
  • [Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in tough applications, e.g. high-alloy construction....
  • [Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or....
  • [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength....
  • [Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee,....
Check Stock

KOWOOD PRO Flush Trim Router Bit(16 Flutes) 1/2\Shank,2\Cut Length

  • KOWOOD Pro flush trim router bit is designed specifically for professional trimming work.
  • This flush trim router bit features 16 individually brazed carbide tips in a compression design in order to eliminate chipping.
  • Multi blade technology can effectively improve work efficiency and tool life.
  • Quality construction, YG8 tungsten carbide blade provides a clean and accurated cut with durable powder coating finish.
  • ▲What You Get▲KOWOOD Pro Flush Trim Router Bit (16 Flutes) 1/2" Shank, 2" Cut Length * 1.
  • 12-Month Service Card. Our after-sales customer service is available at any time. Please feel free to contact us for help.
Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

  • Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
  • Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
  • carbide-tipped anvil and spindle have 0.256" measuring....
  • Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
  • Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
  • Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check Stock

SDS Plus Hammer Drill Bit 50Pcs 1/4 in. x 6 in. Masonry Concrete Rock Drill

  • ✔️ 【SDS DRILL BIT DIMENSION】: 1/4" (Diameter) x 6" ( Overall Length).
  • ✔️ 【APPLICATION】: SDS Plus Drill Bit Is Ideal for Drilling In Concrete, Masonry, Stone, Bricks and Other Construction Projects.
  • ✔️ 【SDS DRILL CARBIDE TIP】: YG8C Tungsten Carbide Tip Ensure Quick Easy Drilling with Long Cutting Life.
  • ✔️ 【SDS PLUS HAMMER DRILL DOUBLE FLUTE】:S4 SDS Double Spiral Flutes Keeps Fast Easy Chips Removal with Fast Cut Speeds.
  • ✔️ 【SDS PLUS SHANK】: Made of Premium Quality of Crv Steel to Ensure the Long Cutting Life..
Check Stock

Benchmark Abrasives Ball Shape Premium Tungsten Carbide Burr with 1/4 Inch Shank Aluminum Cut Rotary Tool Head Diameter 1/2 Inch Die Grinder Drill Bit SD-5NF

  • Benchmark Abrasives aluminum cut carbide burrs are used on aluminum, copper, zinc alloys, and magnesium as well as for non-metal materials such as plastics, hard rubber, and some woods..
  • The strong and durable design of the carbide burrs ensures fast stock removal without loading. Suitable to use for medium stock removal, deburring, finishing, and cleaning..
  • Designed to meet industrial standards, our carbide burrs are recommended to be used with Die Grinders and hand-held pneumatic grinders, and other power drills..
  • Efficient surface conditioning discs are used in various industries like automotive, transportation, mining, shipbuilding, foundries, construction, welding, fabrication, petrochemical, etc..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Toolman Premium Multifunctional Carbide-Tipped Circular Saw Blade Universal Fit 7-1/4\ 48T 5/8\ Arbor Table Miter Cutting for Metal Cutting STH004

  • This circular saw blade is designed for cutting light gauge ferrous metal. Resharpenable long-lasting carbide tips are specially designed to cut steel, aluminum and other metals..
  • Thin kerf with Nitro Shield non-stick coating.
Check Stock

Benchmark Abrasives Tree Shape - Radius Premium Tungsten Carbide Burr with 1/4 Inch Shank Aluminum Cut Rotary Tool Head Diameter 1/2 Inch Die Grinder Drill Bit SF-5NF

  • Benchmark Abrasives aluminum cut carbide burrs are used on aluminum, copper, zinc alloys, and magnesium as well as for non-metal materials such as plastics, hard rubber, and some woods..
  • The strong and durable design of the carbide burrs ensures fast stock removal without loading. Suitable to use for medium stock removal, deburring, finishing, and cleaning..
  • Designed to meet industrial standards, our carbide burrs are recommended to be used with Die Grinders and hand-held pneumatic grinders, and other power drills..
  • Efficient surface conditioning discs are used in various industries like automotive, transportation, mining, shipbuilding, foundries, construction, welding, fabrication, petrochemical, etc..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock