ReviewsCarbide Insert Cutter

Wood Turning tool Carbide Tipped Working Lathe Tools Combo Set Include Finisher Rougher Detailer For Pen Bowl Making,Set Of 3

  • Combo Set Include: 3 Pieces Wood Turning Tools(Mid Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key.
  • Dimension：Length of Tool Bar 5.91″(150mm) ，Length of wood handle：9.84″（250mm ），Overall length 15.75″(400mm).
  • Indexable Replacement carbide insert design:matched with Carbide Cutter (Square15×15 × 2.5mm-R50-30°，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point).
  • Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock

PSI Woodworking LXPMSET Lathe Woodturning Ultra Carbide Chisel System

  • Multi-function carbide chisel system that uses a single handle with three interchangeable, replaceable carbide cutter profiles.
  • Includes: Chisel handle, 2" Radius Carbide Cutter (LXPMBS) and Carrier, 3/8" Round Carbide Cutter (LXPMBR) and Carrier, Diamond Carbide Cutter (LXPMBD) and Carrier, and all needed 3mm set screws.
  • Also includes: Magnetic Chip Deflector (LXPMCD), 3mm Allen Wrench, Nylon storage and carrying case, and instructions.
  • Tool length is 16" consisting of 11.5" handle and 4.5" blade.
  • Flat bottom blade ensures straight, level cut along tool rest.
  • Numbered edges on carbide cutters for consistent, reliable rotation.
Check Stock

VINWOX 20\ Full Size 4 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Carbide Turning Tool, Including Rougher, Finisher, Square Radius, Detailer

  • PRESS ✅PROMOTION or ✅EXTRA SAVING FOR FREE GIFT! The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

HHIP 2001-0038 1/2-1-3/4 Inch Indexable Countersink & Chamfer Tool, 82 Degree

  • Deburr and countersink large diameter holes.
  • Positive rake for smooth cutting without chatter..
  • TIN coated REPLACEMENT CARBIDE INSERTS (TCMT221) (Item 6042-0022), (TCMT32.51) (Item 6004-7031), (SCMT 432) (Item 6004-3432).
Check Stock

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • 【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
  • 【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock