ReviewsCarbide Insert For Aluminum

Cocowin PVC Pipe Reamer, PVC Fitting Saver, PVC Socket Saver with 1-½-Inch and 2 Inch Head Aluminum for Water Lines, Drain Lines, Vent Lines

  • Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
  • It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature..
  • Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC and ABS Ventilation Pipe, Drain Pipe, Water Pipe..
  • High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
  • Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
  • Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ..., making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Replacement carbide inserts (2pcs Square14 ×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°, 2pcs Diamond 10×28mm with Radius Point) and 3 torx star tip wrenches..
  • ✅ SATISFACTION GUARANTEE - Our number one priority is customer satisfaction! If you aren’t happy with your wood turning carbide tool set we offer a no questions asked, 100% money back guarantee..
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ...aking them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Replacement carbide inserts (2pcs Square14 ×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°, 2pcs Diamond 10×28mm with Radius Point) and 3 torx star tip wrenches..
  • ✅ SATISFACTION GUARANTEE - Our number one priority is customer satisfaction! If you aren’t happy with your wood turning carbide tool set we offer a no questions asked, 100% money back guarantee..
Check Stock

Accusize Industrial Tools 1/4\ x 3/8'' Cut-Off Holder, Parting Tool, Mgehr04-2 of 2387-2001 with 10 Carbide Inserts for Cutting Steel, 2387-0001ins

  • Insert model for this holder: Carbide insert TiN Coated MGMN200 Double End Cut-off.
  • MGMN-2 Double End Carbide Cut-Off Insert.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

  • 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.
Check Stock

Dremel 26150684JA Polishing Kit by Dremel

  • Package Content: 10pcs x Carbide Insert, 1 x Plastic Case.
  • Overall Size: 10 x 3mm / 0.4" x 0.12"(D*T).
  • Hole Diameter: 6mm / 0.24"(Max), 4.5mm / 0.18"(Min).
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

Polishing Bonnet, 9 to 10 In, Wool (Pack of 10)

  • Package Content: 10pcs x Carbide Insert, 1 x Plastic Case.
  • Overall Size: 11 x 6 x 3mm / 0.43" x 0.24" x 0.12"(L*W*T).
  • Hole Diameter: 4mm / 0.16"(Max), 3mm / 0.12"(Min).
Check Stock

15mm x 15mm x 2.5mm -30 Degree Carbide Cutter Insert for Wood Lathe Turning, Woodworking Spiral Helical Planer Cutterheads - Box of 10

  • 15mm x 15mm x 2.5mm -30 Degree Carbide Cutter Insert for Jointers Cutterheads - Box of 10.
  • Insert and cutterhead design greatly reduce tearout..
  • Made of solid tungsten carbide, sharp and durable, Specifically manufactured for hardwoods & MDF.
  • Excellent replacement carbide insert cutter specially Fits Byrd Journal Helical head.
  • 10 pieces per box,packed with a plastic container for safe and easy storage . If one knife edge is dull or nicked,just turn it to another edge which greatly reduces you down time.
Check Stock