ReviewsCarbide Pilot Counterbore

PSI Woodworking PKTRIMSE Penturning Carbide Insert Barrel Trimming System

  • Includes: Cutter Head, (2) Carbide Cutters, (2) Cutter Screws, 7mm Pilot Shaft, (5) Trimming Sleeves, Allen Wrench, Star Wrench.
  • The 4-sided replaceable 12mm carbide cutters (PKTRIMSX) will cleanly trim pen barrels up to 1" diameter.
  • Included components will trim (9) tube diameters: 7mm, 8mm, 3/8.
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

TCT Hole Saw Set 3pcs JESTUOUS 3/8 Inch Shank Diameter 7/8 1-1/8 1-3/8 Cutting Dia Carbide Tipped Tooth Round Drill Bit Hole Kit Cutter for Stainless Steel Metal Wood

  • Carbide tipped hole saws are suitable for electric drills and platform drills..
  • High quality tungsten carbide materail teeth,reduce the damage of tips,increase the endurance,provide a longer service life..
  • Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,FRP,etc..
  • Designed with precision ground,sharp tough gears and stepped pilot drill bit to drilling more precise,smooth,faster and safer,leave perfect cutting results..
  • Package: 3 hole saws(cutting diameter:22mm/29mm/35mm)+extra 2 pilot drill bits+extra 1 ejector spring with plastic case..
Check Stock

REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8\-2-1/8”)

  • ...utters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【High Quality Material】:This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • [Application]: These Hole Saw Sets provide fast and precise cuts into 28MM thickness metal material, they are Industrial grade metal drilling hole cutter for stainless steel, metal, iron. It is also suitable for plastic, aluminum, FRP, etc. Remember to add coolant during continuous high-speed drilling..
  • 【Easy to Use】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Sincere Service】: Drill bit, spring, wrench are included, which make your job more convenient and easier.The pilot drill bit is detachable.If you have any question about product, ....
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable;.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

  • 12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
  • One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
  • NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
  • 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
  • ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.
Check Stock

AUTOTOOLHOME TCT Hole Saw for Steel Tungsten Carbide Tipped Hole Saw Drill Bit T.C.T Hole Cutter with M2 Titanium Plated Pilot Drill Bit Professional for Hard Metal Stainless Steel Cast Iron (2-3/8\(60mm))

  • This Tungsten Carbide Tipped hole saw made from high quality TCT Carbide,carbide tooth with high hardness and good wear resistance.,with detachable M2 Titanium-Plated Pilot center drill bit ,higher hardness, better positioning, and no rust,it's hard to break.an excellent alternative to traditional Bi-Metal Hole saws..
  • Quick cutting, more precise, smooth,longer service life cuts up to 1~25mm thick material like stainless steel, high alloy steel, aluminum, castings, section steel, iron, copper and other hard alloys. plastic,wood, FRP and PVC.Note: Cannot be used for concrete, tiles and stone..
  • This TCT hole Saw teeth designed with Three-blade,with outer blade, middle blade, inner blade, small incision resistance and no burrs during drilling. Opening neat, smooth, no broken edges, no tremor phenomenon, chip easily.ideal for cutting hard metals.
  • T.C.T. cutters widely used for electrical construction, transit work and general metal fabrication.Suitable for installation in drill presses, bench drills,hand held electric drill,impact drill,magnetism drilling machine and so on..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body with chip hole,Fast chip removal, then cuts a clean, burr-free hole faster than conventional twist drills or ....
Check Stock

WICHEMI 10PCS TCT Hole Saw Kit Tungsten Carbide Tipped Hole Cutter Set Heavy Duty Hole Saw Hole Cutting Drill Bit for Stainless Steel Copper Iron Aluminum Iron Metal Plate 5/8\ to 2-1/8\ inch

  • ...mm(7/8”), 25mm(1”), 28mm(1-3/32”), 35mm(1-3/8”), 38mm(1-1/2”), 45mm(1-3/4”), 50mm(2”), 53mm(2-1/8”). The package contains 10pcs pilot drill bits and 2pcs L-shaped hexagon wrench. A variety of sizes to meet your different needs..
  • 【Premium Material】- This hole saw is made from high quality tungsten carbide tipped cutters, ensures its high hardness, rust proof and wear resistance. Designed with precision ground, sharp tough gears and stepped pilot drill bit to drilling more precise, smooth, faster and safer, leave perfect cutting results..
  • 【Fast Cutting Speed】- The spring-type guide drill can eject the chips to make the cutter body cut clean and smooth, which not only saves cleaning time, but also shortens the cutting time. The speed of burr-free holes is faster than that of traditional twist drills or other hole saws, and has a greater advantage in cutting time..
  • 【Multipurpose Tools】TCT Drill Bit sets cut quick, precise holes in 28MM thickness metal material, they are industrial grade metal drilling hole cutter for stainless steel, mild steel, alloy steel, iron,copper, aluminum, castings, plastic and brass..
  • 【Wide Application】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. The carbide hole saws se....
Check Stock

Anbull Carbide Hole Saws Hole Cutter Set 9 Piece Stainless Steel, Includes 6-Piece Hole Cutter 2-Piece Pilot Drill Bits 1-Piece L-Wrench and Molded Plastic Case, Long Life Hole Saw Kit for Hard Metal

  • High Quality: Adopt tungsten carbide material, unique cutting-edge grinding technology, sharp and wear-resistant, not easy to break, drilling high efficiency and fast chip removal, extremely long service life..
  • Fast Cutting & Chip Removal: Use high-strength, high-sharp tungsten carbide blades,and anti-vibration gear design, fast and durable. Arc-shaped chip pocket design, conducive to the smooth discharge of iron filings, reducing chip jamming, and conducive to chip holding at the limit cutting depth..
  • Precise Cutting: Stepped pilot drill bit design, precise center positioning, providing fast and precise incision, and with step cutting function, effectively decompose the cutting resistance of the centering drill, reduce the impact force at the moment of drilling through and avoid chipping of the cutting edge.
  • And Pilot Drill Spring Design, control the displacement of the cutting edge, avoid damaging the drill bit by sudden cutting..
  • Scope of Application: Used with power drill, magnetic drills, benchtop drills to quickly and accurately cut stainless steel, sheet metal, cast iron, mild steel, aluminum and FRP less than 5 ....
Check Stock

Klein Tools 31852 Heavy Duty Hole Cutter, 7/8-Inch Carbide Hole Cutter Cuts Stainless Steel, Mild Steel, Iron, Copper, Brass

  • Heavy duty, durable carbide hole cutters for long life.
  • Cuts quick, precise holes in stainless steel, mild steel, iron, copper, and brass sheet up to 3/16-Inch (0.5 cm) thick.
  • Split point pilot drill bit prevents bit walking.
  • Integrated flange prevents the operator from drilling beyond the sheet metal.
  • Conduit and pipe sizes: 1/2-Inch (1.3 cm).
Check Stock