ReviewsCarbide Planer

Electric Planer Power Handheld Planers 3-1/4 inch Width 2mm Adjustable Depth, 7Amp Power Motor with Dust Collection Bag, Parallel Fence Bracket for Planing Floor Fitting Door Trimming Boards

  • 【High Power to Weight Ratio】: 7Amp wood planer guidance motor and two reversible double-edge carbide blades for added performance. This hand planer is ideal for woodworking, construction framing, fixing doors, fitting wood and correcting splinters, chips and misshapen edges..
  • 【Cutting Speed】: 3-1/4 inch cutting width with 5/64 inch planning depth, 18000rpm no-load speed. 8-position adjustable planing depth for optimal planing results..
  • 【Durability & Protection】: The aluminum front and rear shoes will not deform and rust, lasts up longer than iron shoes on other wood planer, ensure parallelism of cut. And the rubber drive belt provides enhanced belt durability. The lock-on button for continuous operation, while helps prevent accidental starts..
  • 【Easy To Use】: Equipped with extra auxiliary handle, ergonomic soft grip handle and lock off switch..
  • 【Dust Bag】: The included dust bag mounts to minimize clean-up on your workshop..
Check Stock

FOXBC 14.3mm Carbide inserts Cutter Knives 2 Cutting Edges for Cutech Spiral Helical Cutterhead Planer Blades for Rikon 25-130H,20-600H, 25-131H, Craftex CX125HC CX08BTHC and King Canada KC-13HPC - 10 Pack

  • 14.3mm Carbide inserts Cutter kit Knives 2 Cutting Edges.
  • Standard Size-14.3mm(length)X14.3mm(width)X2.0mm(thickness) square straight with 2 edges,50 degree cutting angle.
  • Most Convenient-If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.and all are of the same sharpness. Easy to operate,each blade has 2 sharp edges,if one is dull, just change it to the other side, Carbide cutter Corners are very sharp with virtually no radius Best choice for turning straight profiles and nearly 90° inside corners.
  • Replacement for Rikon 25-130H,20-600H, 25-131H, King KC-13HPC, Craftex CX Series CX125HC CX08BTHC , Cutech Spiral Cutterhead Planer.
  • for Cutech Tool Planer Jointer 40700H-CT 4700HC-CT 40100H-CT 40600H-80100-CT 40200H-CT 40600HC-80100-CT 40200HC-CT Head.
  • Application: hardwoods and softwoods,HDF, MDF,plywood, chipboard, particle board,etc..
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 3 Cutting Diameter Carbide Insert Slab Flattening Router Bit Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 4-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3 inch larger cut diameter and 4-wing design, make more....
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The spoilboard surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use....
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoil board. Used on soft and hard woods,....
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming....
Check Stock

FOXBC 3-1/4 Inch Industrial Carbide Hand Planer Blades Replacement for Makita, DeWalt, Bosch, Wen, Ryobi and Most 3-1/4 Planer (82x5.5x1.2mm - 10 Pack, Tungsten Carbide)

  • Size and Material: 3-1/4 Inch (82x5.5x1.2mm).
  • Fit model: Bosch PA1202, 1593, 1594, 3258, 3272, 3272A, 3296, 3365, 53514, and 53518, PL1632, PL2632K, PLH181B, GHO 6500 and GHO 10-82.
  • Planer blades reversible and disposable ,replace for 3-1/4 inch woodworking power planer..
  • Also Fit: DeWalt #DW677, DW678, and DW680, D26676, D26677, D26677K, DCP580B.
  • Craftsman #917370, and 926729, 900173700.
  • Packing: 10 piece packed in a plastic case.
Check Stock

BINSTAK CNC Spoilboard Surfacing Router Bit 1/4 Shank Slab Flattening Router Bit with 1-3/8 Cutting Diameter 2+2 Flutes Insert Carbide Wood Planer Router Bits Planing Bit for Woodworking

  • Carbide Inserts: 12*12mm. 2+2 inserts design, resulting in a more balanced tool while running and get a smoother surface. The Router Bit comes with insert blades. For more blades, please purchase the K1222 model. ASIN：B0B1MJ9Z9P.
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Bon Tool 11-904 Square Bead Jointer - 1\ X 3/8\ - Wood Handle

  • SUPERIOR FINISH AND QUIETER CUT: Helical cutterhead with 56 indexable carbide inserts..
  • STRENGTH AND DURABILITY: Heavy-duty cast iron and steel construction..
  • CONSISTENT POWER: Powerful 3-HP induction motor..
  • ACCURACY: Large handwheel for quick and precise adjustments of planer table..
  • STABILITY: Heavy-duty, one-piece steel closed stand includes mounting tabs..
Check Stock

3-1/4 Carbide Tipped Planer Blades Knives 82mm compatible Replacement for Makita 1900B KP0800 DeWalt DW6655 D26676 DW680 Bosch PA1204 PA1205 1594 Ryobi HL-82 L282 Hitachi and most Hand-Held Planer

  • Woodmaster planer blades, allow 10-20 or more re-sharpening. Sharp blade fit for cutting soft woods, hard wood, ply-wood board etc..
  • Resharpenable edges made of Tungsten Carbide Tiped（TCT） material, which can offer a long use life and premium performance. Qucik set knives for easy set up.
  • Lasts up to 25% longer than HSS blades, 15% sharper than standard HSS blades.
  • Compatible with Makita DeWalt Ryobi Hitachi and most Hand-Held Planer. Set of 2, Plastic case packaging.
Check Stock

DEWALT Hand Planer Kit, 5.5-Amp, 3-1/4-Inch (D26677K)

  • Powerful 5.5 amp motor of the electric hand planner provides a smooth, even finish in the hardest of woods.
  • The hand planer featuring 34,000 cuts per minute achieves a fast removal rate.
  • Calibrated depth adjustment knob to 1/16-inch (1.5mm approximately).
  • Includes reversible carbide blades for improved blade life and material finish.
Check Stock

BINSTAK 12mm Square Corners Carbide Inserts 4 Edges 12mm lengthX12mm widthX1.5mm thick-35 Degree Cutting Angle Pack of 10 Straight-Hole

  • 12mm*12mm*1.5mm (length*width*thick), 35°angle, Hardness: 93HRA, 4 cutting edges..
  • Made of solid tungsten carbide, high strength and hardness, own longer use life, sharp and durable..
  • Each blade has 4 sharp edges, if one is dull, just change it to the other side. More effective!.
  • Ideal for giving you a smooth finish on curved, concave surfaces, hollowing jobs and for general turning applications. Used on soft and hard woods,....
  • Fits for Spiral/Helical Planer Cutter Heads, Rougher Wood Turning Tools. Replacement carbide tips for CNC router fits NITOMAK and BINSTAK Insert....
Check Stock

G0945 6" Benchtop Jointer

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The improved design helps users to install the carbide inserts correctly onto the insert seats.It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer..
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods..
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4 sides are out of use..
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high quality control, you can choose our products with confidence..
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached to the product photos. Fit fo....
Check Stock

6 pt Carbide Flail Cutter Complete Drum Kit for Edco CPM-8 Scarifier/Concrete Planer - General Setup

  • Complete Deluxe Bushed Drum Replacement Kit Designed for Edco CPM-8 Scarifier/Concrete Planer.
  • Includes: Fully Assembled Drum with Long Lasting Cutters, Shafts, and Spacers.
  • 78 pcs of 6 point 1-3/4" Carbide Flail Cutters.
Check Stock