ReviewsCarbide Punching Dies

STOBOK Metal Hole Puncher Two Holes Punch Craft Hole Punch for Office School Home

  • Brand new and high quality metal slot hole punch puncher..
  • Spring action provides extra strength, for easy operation. It is with comfortable design for easy punching and less hand fatigue..
  • Advanced cutting dies punch through up to 30sheets of paper.
  • Made of sturdy steel, this product is built to last.
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

The Complete Reloading Manual for the .44 Magnum

  • ncludes Carbide Full Length Sizing Die, Bullet Seating Die, Powder Through Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
  • Note: These dies can be used to reload 44 Magnum and 445 Super Mag..
Check Stock

Punch, Paper - Three Hole Puncher: Single Punch Paper Shredders, Punches & Scissors

  • [Fast Punch & Precise Positioning] – The hydraulic hole puncher uses a high-power motor, with a punching speed of 2-3 seconds. The punch is precisely designed, and every punch is precise..
  • [Portable & Convenient] – This hole punch is portable, and can be operated anytime, anywhere. Equipped with an auxiliary handle, it can be operated by hand, which is convenient for working at different angles. It can also be installed on the base to work on the platform..
  • [Applicable Range] – This hydraulic punch is suitable for copper/aluminum plates with a thickness of 0.11″~0.31″.
  • iron/steel plates with a thickness of 0.11″~0.23″.
  • 4~6# angle steel/iron. However, it does NOT apply to channel steel!.
  • [Complete Accessories] – The package includes: 1 x punching machine, 1 x big wrench, 1 x base, 2 x hexagon wrench, 2 x screws, 1 x auxiliary handle, 1 x carbon brush, 5 x standard dies: Φ6.5mm/9mm/13mm/17mm/20.5mm (Φ0.25″, 0.35″, 0.51″, 0.67″, 0.8″). The electric punch is packed in an iron box, and the internal parts are arranged neatly, shockproof and drop-proof..
  • [One-year Warranty] – Within one year of purchase, if something goes wrong with the product, you can replace it for free. Please purchase with confidence..
Check Stock

VEVOR Hydraulic Pipe Crimping Tool Copper Crimping Pliers with Jaws 1/2 12.7mm 3/4 19.05mm 1 25.4mm 10T Hydraulic Copper Tube Fittings Crimper 40CR Steel for Copper Tube Plumbing and Fitting

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping....
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This....
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an....
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic....
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied....
Check Stock

8MILELAKE Panel Flange Hole Punch and Crimping Tool 5 mm Hand Flange Punch Tool

  • Original Combined Settling Hole Pliers for depositing sheet edges and punching workpieces..
  • Handhabung without effort - one-handed operation - hardened settling jaws. Maximum power transmission with low effort..
  • Applied for the repair of the car body and most other sheet metal work..
  • Material / Pliers Body: Made of special tool steel Material / Baking: Made of special tool steel and hardened.
  • Material / stamping and dies: Made of high quality tool steel and fully through hardened.
Check Stock

Hydraulic Cylinder Jack SYD-18F Mini Hydraulic Angle Steel Hole Punching Tools 6.5mm-18.5mm with Hand Pump Super heavy load

  • Dies Φ6.5,Φ8.5,Φ10.5,Φ12.5,Φ14.5,Φ16.5,Φ18.5mm.
Check Stock

Tamerica TCC242 DuraBind Comb Binding Machine, 15 Sheets Max. Punch Capacity, 425 Sheets Max. Bind Capacity, 2\ Max. Comb Diameter, 14\ with Open Throat Max. Punch Length

  • Punches 5,000 sheets/hr up to 14" or 24 holes.
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

240 Grit, B Grade, Greased Based, Silicon Carbate, Loctite Clover Lapping Compound (1 Each)

  • Price For: Each Color: Gray Application: Lapping, Honing and Grinding Valve Seats, Gear Teeth, Dowel Holes In Dies, Bushings, Flat Surfaces On Seals and Castings, Machining Parts, Shafts, Knives and Cutting Blades Grit: 240 Grade: B Size: 1 lb. Item: Silicon Carbide Grease Mix Container Type: Can Country of Origin (subject to change): United States.
Check Stock

KOWOOD Pro Countersink Drill Bit Set #4, 6, 8, 10, 12, 5-Piece for Wood High Speed Steel, Woodworking Carpentry Reamer with 1 Free Hex Key Wrench

  • Mutiple sizes-Includes 5 Gold Screw Countersinks: 5/64”x3/8”, 3/32”x3/8”, 7/64”x3/8”, 1/8x3/8” & 9/64”x1/2”.
  • Quick change-The 1/4" hex shank can be used with power drills and quick-change chucks..
  • Durable – High-grade carbide tipped, fully sharpened edge, quick drilling, easy to use, in longer life.
  • Suitable for woodworking-Compatible with drilling machines with chucks, used to drill holes on wooden boards or wooden floors.
  • Precise punching-punching can be done quickly and accurately. The external thread design can help discharge waste when drilling, so as to ensure successful drilling.
Check Stock