ReviewsCarbide Rotary Burrs

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

Tungsten Carbide Burr Set 1/8 3 mm Shank Die Grinder Bits 20 PC Cutting Burr Bits for Dremel Double Cut Rotary Burr Set for Metall Carving Engraving Drilling Polishing

  • Tungsten carbide - hardness, high strength, and durability. The service life is 8 times longer than that of HSS tool. Pilim double cut carbide rotary burr set can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade, marble, and bone..
  • Whether you are a master or a beginner, the Pilim rotary files are an indispensable tool for you. Milling out, leveling, deburring, cutting out holes, surface work, door lock installation - Pilim rotary tool bits show good stock removal rate through optimum matching of tungsten carbide, geometry, cut, and available coating..
  • No matter what you do - jewelry making or welding, sculpting or tool making, engineering or high precision metalwork. Maybe you enjoy various DIY arts and crafts. Pilim carbide burr set contains everything you need for this..
  • Pilim carbide bit have shank 1/8" (3 mm) - compatible with Dremel, DeWalt, APEXFORGE, Bosch, Ingersoll-Rand, Makita, Milwaukee, Beyond and other rotary tools with 1/8" collet. This die grinder bit set is easy to grasp and use, safe and reliable..
  • Use of Pilim cutting burrs - makes grinding or carving job easy. Shorten working time, improve the working environment and complete the project faster. Enjoy your creation!.
Check Stock

Carbide Burrs Set 4pcs JESTUOUS 1/4 Inch Shank Diameter Aluminum Rotary Files Single Cutting Edge for Die Grinder Drilling Bits Metal Carving Engraving

  • Suitable for cutting aluminum , non-ferrous materials..
  • Carbide rotary burrs are made of solid tungsten carbide,sharp and durable..
  • Single cutting with 1/4 inch shank diameter..
  • Include 4 head types burrs:SA-3NF,SC-3NF,SD-3NF,SF-3NF..
Check Stock

uxcell Tungsten Carbide Rotary Files 1/4 Shank Single Cut Flame Shape Rotary Burrs Tool 10mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Model Engineering

  • Specifications: Shank diameter: 6mm(1/4"), cutting edge diameter: 10mm(2/5"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Cylindrical Radius End Rotary Burrs Tool 3mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing 2pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 3mm(1/8"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Shape Rotary Burrs Tool 6mm Dia for Die Grinder Drill Alloy Steel Hard Metal Carving Polishing Engraving 2pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Drilling 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Top Flat Cylinder Rotary Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Polishing Model Engineering 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Flame Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Model Engineering 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

Tungsten Carbide Rotary Burr Set 20 Pcs 1/8 Shank Die Grinder Bits Double Cut Rotary Burrs Set for DIY Woodworking Drilling Metal Carving Engraving Polishing

  • These carbide burr sets are made of Tungsten Carbide steel which has long working life with high precision shape..
  • This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum..
  • These cutting burrs can work on wood metal plastic ceramic stone glass etc. 20 PCS burr set are ideal choices for your various DIY arts and crafts..
  • 20 kinds of rotary burr set type can meet different work such as carving sculpturing polishing deburring grinding cutting chamfering milling cleaning porting.
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Double Cut Ball Shape Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Wood Soft Metal Carving Polishing Model Engineering 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Double Cut Design: The groove lines are crossed. Double groove rotary files are more suitable for the object density is relatively low, such as wood, plastic, aluminum. With good milling and cutting performance, ensures high work efficiency..
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock