ReviewsCarbide Saw Grinder

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock

SW7B On-Off Toggle Switch 2 Prong for Table Saws and Drill Press Replaces Black & Decker, Delta/Porter Cable 489105-00, 438010170141 Rigid/Ryobi 46023

  • ⭐UNIVERSAL FIT:Switch 489105-00 On-Off Toggle Switch For Compatible with Delta Table Saw.
  • ⭐REPLACES NUMBE:Compatible with 31-695 Type 2 Sander 31-780 Type 1 Sander SA180 Type 1 Belt/Disc Sander 22-540 Type 1 12 inch Planer 22-560 Type 1 Planer 22-565 Type 1 Planer 28-150 Type 2 Band Saw 23-675 Type 1 Grinder / Finisher 14-650 Type 1 Mortiser LA200 Type 1 Lathe 31-325 Type 1 Grinder/Sander TS300 Type 2 Bench Table Saw TS350 Type 1 Bench Table Saw SH100 Type 1 Bench Shaper AP300 Type 2 Air Collector Management SA180 Type 2 Stationary Sander 34-670 Type 2 10 Inch Table Saw JT360 6".
  • ⭐WORKS FOR BRANDS: Compatible with GR450 Type 1 8" 1 6"Tool-less Quick Change Variable-Speed Grinder TP305 12-1/2" Portable Planer DP300L 12" Crosshair Laser Drill Press 17-900 Type 2 16-1/2" Drill Press 36-600 Type 2 Table Saw 50-075 Type 1 Single Stage Collector 50-665 Type 1 1.5Hp 2 Stg Collector 14-070 Type 1 14" Floor Drill Press DP200 Type 1 10" Drill Press DP400 Type 1 Drill Press GR250 Type 1 6" Bench Grinder with Lamp 46-250 Type 2 Midi-Lathe 36-610 Type 2 Table Saw 36-380 Type 1 Xl-10.
  • ⭐Specifications: Voltage: 125/250V Amperage: 20/12A Terminals: Two,On-Off Toggle Switch replaces Compatible with Delta 489105-00, 1343758 (Optional Lock).On-Off Toggle Switch re....
Check Stock

6 Inch Dish Resin Diamond Grinding Facing Wheel/Circle Saw Grinding Wheel,240 Grit for Carbide Circle Saws,1 Pack

  • 【Usage】The Resin Diamond Grinding Facing Wheel with thin rim is greatly used for face sharpening carbide teeth of circle saws blade..
  • Could run on bench grinder or table saw..
  • Resin Diamond is more durable than single diamond.Besides,this quality material is high temperature resistant..
  • 240 Grit, R100 Concentration for a super fine finish.
  • Dimension:6" diameter (D) x 3/8" thick (T) x 1-1/4" Arbor Hole (H).1/4" width (W) and 1/16" depth (X) of diamond.
Check Stock

6 X 40 SAW BOSS

  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp.
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight.
  • Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life.
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability.
  • Laser cut arbor for accurate blade rotation reducing vibration and premature wear.
Check Stock

IRWIN 10-Inch Circular Saw Blade, Carbide, 40-Tooth (15270)

  • Corrosion-resistant coating on the circular saw blade helps prevent rusting.
  • Precision-ground, carbide-tipped teeth let each circular saw blade make smooth, accurate cuts.
  • Circular saw blades are designed for wood cutting.
  • 16° hook angle with 40 teeth and ATB grind.
  • 10" blade length with 5/8" diamond arbor and 0.102" kerf.
Check Stock

Guide Gear Electric Meat Cutting Bandsaw with Grinder Machine for Butchering Butcher Saw Cutter and Grinding Equipment

  • AT-HOME BUTCHER – Turn your home into your own butcher shop with the electric meat-cutting bandsaw with grinder. Easily cut steaks, chops, and....
  • 2-IN-1 FUNCTIONALITY – We included a #8 meat grinder attachment with a 5/16" grinding plate to the electric meat saw. Comes with an auger, blade,....
  • EASY TO USE – We designed our meat saw for butchering with safety and simplicity in mind. The 23.5" x 18.5" stainless steel meat cutting table....
  • SMART FEATURES – Professional butcher meat and bone saw with a powerful 550W, 0.75 horsepower motor, works through tough cuts, bone, even frozen....
  • EASY CLEAN UP – A convenient front access panel on this butcher saw and grinder allows for easy cleaning, maintenance, and blade replacement. Steel....
Check Stock