ReviewsCarbide Saw Tips

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

3Pack 4-1/2-Inch 40T TCT Circular Saw Blade with 7/8-Inch Arbor, Carbide Tipped Teeth General Purpose Hard & Soft Wood Cutting Saw Blade for Angle Grinder

  • DURABLE: OA-BRES circular saw blades are made of durable premium alloy steel material, with hardened and sharper construction-grade tungsten carbide teeth for effective woodworking. Fully Polished and Chrome Plated Surface provides a long-lasting usage life..
  • EFFECTIVE: Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results..
  • Arbor size:7/8inch(22.23mm) with reduce ring 5/8inch(16mm).
  • Carbide Teeth: 40. Perfect choice for a circular saw, miter saw, table saw when needed for ripping and crosscutting. MAX RPM up to 13,500..
  • APPLICATING: General purpose Hard & Soft wood cutting saw blade. for long-lasting cuts in wood, plastic, and composite materials..
  • WHAT YOU GET: 3 Pack 4-1/2-Inch 40T TCT Carbide-Tipped Circular Saw Blade. The saw blades can be used with Angle Grinder, Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, and more..
Check Stock

GoYonder 7 1/4 Inch Circular Saw Blade 60 Tooth TCT Carbide 7.25 Inch Saw Blades with 5/8 Inch Arbor for Cutting Wood

  • 【 High quality 】 -- Fully hardened steel blade body and Tungsten carbide teeth specifically designed for each application to provide maximum performance ,wear resistant and durable in use..
  • 【Perfect Size】 -- GoYonder 7 1/4 circular saw blade with a 5/8" arbor design is suitable for most popular saws. The thickness is 1.4MM.60 Teeth..
  • 【Multipurpose】Suitable for cutting softwoods, hardwoods, plywood, decking, and wood composites. Great for your carpentry needs..
  • 【Fast cutting &Durable】Thin kerf for the fast and smooth cutting action.High grade Tungsten Carbide tips for durability..
  • 【Safety&Package】Package included: 1 x circular saw blade. Warm Prompt: For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment.(Take good care of your eyes/ears/face/hands/body/etc).
Check Stock

Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor, 2-Pack

  • BUNDLE INCLUDES: 2 x Diablo 7-1/4 inch x 60-Tooth ATB Ultra Finish Saw Blade with 5/8 inch Arbor.
  • TiCo HI-DENSITY CARBIDE TOOTH: TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life.
  • BUILD FOR ACCURACY: Tri-metal shock-resistant brazing allows the carbide tips to withstand extreme impact for maximum durability. The blade produces a remarkably clean, chip-free cut that requires little to no sanding.
  • REDUCED FRICTION: A permanent Perma-SHIELD non-stick coating protects the blade from heat and corrosion, reduces friction and pitch buildup.
Check Stock

CUZ-D INDUSTRIES CARBIDE TIP SAW BLADE - 40 Tooth Premium Straight Flush Saw Blades Non-Stick General Purpose Wood Cutting Wheel Circular Saw Wheels 8.5 Inch

  • SPECIFIC FIT for STRAIGHT FLUSH SAW: This blade is made to work with the multi function Cuz D Saw. A unique, high performance, zero clearance saw that....
  • PATENTED ARBOR SYSTEM: Specially designed to eliminate sliding and produces flush, accurate straight edge cuts. The arbor surface remains recessed....
  • READY SET CUT: Carbide bladed tips for max performance and life. Our teeth are produced from high quality material and sharpening is done at a precise....
  • NON STICK COATED BLADES: Engineered for smoother cuts, faster speed, super accuracy and less friction for a high value, energy efficient solution.....
  • NO HASSLE REPLACEMENT: When you buy Cuz-D power tool saw blades, you can feel confident with our saw guarantee. If a saw breaks, we'll fix it. If we....
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood(not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness :Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5,This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable;.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal;Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock