ReviewsCarbide Scrap

uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)

  • Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
  • Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm.
  • shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
  • Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
  • Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
  • High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
  • Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.
Check Stock

End Mill Bit Sets, 12pcs Tungsten Carbide CNC Rotary Bits PCB Milling Bits CNC Router Bits Engraving Bits Cone Cutter Drilling Hole Tool for PCB Mould, Plastic, Fiber, Carbon, Wood 0.25mm~5.5mm

  • Material: Made of quality Tungsten Solid Carbide, These CNC router bits have high flexural strength and wear resistance, sharp and durable, with good milling, cutting performance..
  • Superior precision: Flutes design provide good chip-carrying capacity, enhancing the tool’s ability to remove material. And with sharp cutting edge, improve working efficiency greatly, no glitches or scrap left.
  • Set of 12 size: 0.25mm, 0.3mm, 0.4mm, 0.5mm, 1.3mm, 1.4mm, 1.7mm, 1.9mm, 2.5mm, 3.55mm, 4mm, 5.5mm. It can meet your needs greatly..
  • Widely application: These CNC router bits fit for PCB board, SMT, CNC, Mold, engraving, plastic fiber, carbon fiber, cooper, stainless steel, printed circuit board, other precision environmentally friendly sheet, CNC machine tool,etc..
  • Service guarantee: We promise provide you good customer service, if there is any dissatisfaction, you can just contact us, we will refund you or send you new replacement within 24 hours..
Check Stock

Holster & Sheath Tooling Leather, Veg Tanned, 5 Pounds of Large 7-9oz Pieces(2.75mm-3.75mm), Havanna Brown, Great for Crafting & General Leatherwork

  • 5 POUNDS OF LEATHER - This is a 5 pound package of 7-8 ounce Havanna brown holster and sheath leather scrap from our saddle shop, right outside Glacier National Park, in Columbia Falls Montana..
  • GREAT FOR DIY AND CRAFTING - There are so many possibilities with this assorted bag! We have picked larger pieces perfect for making knife sheaths, gun holsters, wallets, smaller journals, linings, billfolds, wallet-backs, cuffs, conchos, rosettes, bracelets, anklets inlays and many other projects..
  • GREAT VALUE - The pieces are hand picked with you and your projects in mind. Size, shape, shade of brown and number of pieces vary slightly by package. Many companies sell scrap bags with mis-matched colors, small, or just plain unusable pieces in their scrap bags. Our leather scrap bags give you virtually unlimited design options for a bargain..
  • MOLDS AND TOOLS WELL - These larger pieces of high quality leather mold and tool well. They are perfect for making holsters, knife sheaths, small accessories, and straps..
  • HIGH QUALITY LEATHER - We use only the finest US-Tanned leathers in our saddle shop which means you are receiving top quality leather in this assortment of holster & sheath leather..
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

Two Pounds Veg Tan Leather Scrap, 2 lbs Vegetable Tanned Scrap Leather Pieces for Crafting, Heavy Weight Thick 8-9 oz Mixed with 6-7 oz and 7-8 oz Veg-Tan Tooling Leather Remnants,

  • Two Pounds Leathercraft Veg Tan Leather Scrap, 2 lbs Vegetable Tanned Scrap Leather Pieces for Crafting Heavy Weight Thick 8-9 oz mixed with 6-7 on and 7-8 oz Veg-Tan Remnants. You can Expect a mix of 8-9 oz Vegetable Tanned Tooling Leather and 6-7 oz and 7-8 oz Veg Tanned Leather. Our Veg-Tan Cow Hide Leather Remnant Bags will have a Mix Premium B Grade and Economy C/D Grade Leather. Pieces may have some Imperfection such as Bugs Bites, Oxidation, Range Marks, Scars, Brands, or Discoloration..
  • Cowhide Leather Scraps Perfect for Leatherworking and Making Finished Leather Goods as well as Tooling Practice Pieces, Stamping, Embossing, and Carving. Thick Heavy Weight Full Grain Veg Tanned Pieces takes Leather Dye, Leather Acrylic Paint, and Burnishes Effortlessly. Vegetable Tanned Cowhide Leather is tanned using all Natural Tannins, each Tannery has its own Recipe for tanning leather hides so the Color of the Leather does vary..
  • The Secret of Craft Leather Scraps is all of the Finished Leather Goods you can make without inventing in a Full Side of Leather. From our Leather Scrap Bags our Buyers have made Key Ring or Key Holder, Gun Holster, Knife Sheath, Sharpening Str....
Check Stock

Composite Carbide Sandblaster Nozzle Tip: 3/32' ID, Longer-Lasting than Tungsten & Boron Blasting Nozzles

  • SUPER COMPOSITE CARBIDE: Experience one of the longest lasting materials used in a sandblaster nozzle at a fraction of the price. The composite carbide lasts much longer than Ceramic, Tungsten Carbide & even Boron Carbide..
  • LONG-LASTING NOZZLES SAVE $: Composite carbide sandblaster nozzles are known to outlast all other types. These are estimated to last up to 1000x ceramic, 50x times tungsten carbide, 5x times boron carbide..
  • 3/32" ID BORE DIAMETER: Our medium size is most common, especially for blasting both fine & course abrasive grits inside a cabinet. Shape: standard tapered nozzle tip which is great for for most pressure pot sandblaster nozzle holders..
  • PREMIUM SANDBLASTER NOZZLE: Made of a hard, compacted, specially formulated carbides weighting about 30 grams! Holds up to aggressive abrasive like aluminum oxide and silicon carbide. Has an estimated service life of up to 1,000+ hours with aluminum oxide abrasive!.
  • WEAR RESISTANCE CARBIDE: Get better performance with low-wear nozzles and save money in the long run! 100% SATISFACTION GUARANTEE or your money back. Please contact us if you feel it didn't last..
Check Stock

Genmitsu 30pcs PCB Drill Bits Set, 0.1mm-3.0mm, 1/8″ Shank Spiral Flute CNC Router Bits for Print Circuit Board Jewelry CNC Engraving, PD30A

  • High Quality: The PCB drill bits set are made of high-quality tungsten carbide steel alloy, which is high wear resistance, high hardness, anti-impairment. Seismic design on the blade edge enables it to stay stable during engraving..
  • bits diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5m, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm. This Set contains 30 different size drill bits diameter, each size having1 pcs..
  • Advantage: With spiral flute cutting edge, these PCB drill bits can reduce cutting force and prevent the drill from broken and improve accuracy. They work quickly and cleanly, with no glitches or scrap left..
  • Application: Suitable for amber beeswax, printed circuit boards, 3D printer nozzle cleaning, plexiglass, bakelite, CNC engraving, jewelry, plastic, and other precise drilling. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • 30-piece Combo Set: There are 3 sets of drill bits (Set A: 0.1mm-1.0mm.
  • Set C: 2.1mm-3.0mm), each of 10 pieces, and eac....
Check Stock

Woodys Dooly Carbide Wear Rods - 6in. DY6-6580

  • Dooly wear bars create four parallel traction lines for dramatically decreased darting and enhanced handling.
  • Each wear rod features two 7/16in. runners with center carbide.
  • 6in. and 8in. carbide carry 60 degree carbide.
  • Hardweld at front of wear rod and 1.5in. carbide pad at the back.
  • Durable 3/8in. - 16 mounting studs ensure secure fit.
Check Stock

Apache Mills Masterpiece Flagstone Grey Stone Door Mat, 18-Inch by 30-Inch

  • Made from heavy duty recycled rubber, old scrap tires are made into a new doormat.
  • Flocked fiber surface in beautiful, full color designs.
  • Molded construction with deep channels that trap dirt and scrap shoes clean.
Check Stock

Contest Favorites Afghan Squares - Crochet Patterns

  • Leisure Arts More Projects From Your Scrap Bag Book.
  • Leisure Arts More Projects From Your Scrap Bag Book- Learn to use up partial skeins and yarn scraps to make six colorful designs..
  • Use leftover yarn to make an afghan, pillow, tote bag, and more bright and richly textured creations..
  • 6 projects for crochet using size 4 medium weight yarn and US size J crochet hooks..
  • Designs include: waves afghan, bolster pillow, tote, framed squares pillow, open fan shawl, and vest..
Check Stock

VINWOX 20\ Full Size 4 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Carbide Turning Tool, Including Rougher, Finisher, Square Radius, Detailer

  • PRESS ✅PROMOTION or ✅EXTRA SAVING FOR FREE GIFT! The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock