ReviewsCarbide Substrate

CGC Tools GM12F4 Gorilla High Performance Carbide End Mill, GMX-35 Coating, Flat, 4 Flute, 1/2\ Diameter, 1-1/4\ LOC, 3\ OAL

  • USA, Flat, 4 Flute, 1/2" Diameter, 1-1/4" Length of Cut, 3" Overall Length, GMX-35 Coated.
  • Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable.
  • Patented variable flute and index design which reduces chatter and vibration, Recommended for aggressive machining applications in all materials.
  • GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.
  • This weapon of mass production destroy any competition.
Check Stock

Melin Tool CCMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 4 Flutes, 3\ Overall Length, 0.5\ Cutting Diameter, 0.5\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Can be used for drilling, slotting, chamfering, and profile milling.
Check Stock

KEO 55805 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 90 Degree Point Angle, Round Shank, 1/4\ Shank Diameter, 3/8\ Body Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 55794 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 82 Degree Point Angle, Round Shank, 1/4\ Shank Diameter, 3/8\ Body Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 55781 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, 6 Flutes, 60 Degree Point Angle, Round Shank, 3/16\ Shank Diameter, 3/16\ Body Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

Melin Tool AMG-DP Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Can be used for drilling, slotting, chamfering, and profile milling.
Check Stock

Micro 100 CRE-187-062 Corner Rounding End Mill - Double-Ended, 0.060\ Fl, 1/16\ Radius, 0.005\ Max Lead-in Lenght, 3/16\ Shank Dia, 2\ OAL, Uncoated

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
Check Stock

KEO 55733 Solid Carbide Single-End Countersink, Uncoated (Bright) Finish, Single Flute, 100 Degree Point Angle, Round Shank, 1/4\ Shank Diameter, 3/8\ Body Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

Melin Tool 16099 RCMG Carbide Corner Rounding End Mill Uncoated Bright Finish Non-Center Cutting 0 Deg Helix 4 Flutes 2 Overall Length 0.125 Cutting Diameter 0.1875 Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
Check Stock

KEO 16904 Solid Carbide Plain Combined Drill and Countersink, Uncoated (Bright) Finish, 60 Degree Point Angle, Round Shank, 3.15mm Body Diameter, 1.25mm Point Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

Melin Tool-16100 RCMG Carbide Corner Rounding End Mill Uncoated Bright Finish Non-Center Cutting 0 Deg Helix 4 Flutes 2.5000 Overall Length 0.125 Cutting Diameter 0.25 Shank Diameter

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
Check Stock