ReviewsCarbide Turning Tools

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display....

Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display....

Check Stock

Simple Woodturning Tools 3 Carbide Wood Turning Tools with Rougher Finisher Detailer & 12 Color Coded Solid Aluminum Lathe Tool Handles USA Made

These high quality carbide turning tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
Easy tool selection with color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8" outside diameter by 12"....
Carbide turning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is easy....
Designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9"..
Greatly simplifies woodturning with no need for any sharpening equipment..

Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
Designed and Manufactured 100% in the USA.

Check Stock

OSCARBIDE 5/16

Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..

Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..

Check Stock

Pack of 5 Wood Turning carbide Cutter inserts Combination Set,For YUFUTOL Or Other Popular Wood Turning Tools(Include Square, Square With Radius,Diamond,Round Shape Cutters) Supplied with Screw

This Combination Carbide Inserts Set Will Give The Best Selection For Your Wood Turning Job,It Fits YUFUTOL Brand Wood Turning Tools Or Other Similiar Brand Tools..
Size And Shape Included: Square(14mm 15mm),Square With Radius (15mm-2″ Radius),Round(16mm), Diamond Shape With Radius Point..
90* Square and 2″ Radius Fix Full Size Rougher, Round Cutter Fix Full Size Finisher or Hollower, Diamond Cutter Fix Detailer.
All The Carbide Insert Cutters Supplied With Screws, All You Need Is Find The Matched Wood Turning Tools Before Start Your Turning Job.
Advantages：Significantly Improved Efficiency And Turning Results, Save Time and Cost.

Check Stock

Simple Woodturning Tools Carbide Wood Lathe Tool Mid Size Set of 5 with Solid Aluminum Beautiful Color-Coded Lathe Tool Handles Stainless Steel USA Made

Set of 5 professional carbide wood lathe tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
Simplify woodturning tool selection with beautiful color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8"....
Carbide woodturning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is....
Four included tools are designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9". The....
Greatly simplifies woodturning with no need for any sharpening equipment..

Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
woodturningTools and Accessories - 1pcs handle and 1pcs extensi....

Check Stock

Carbide Tipped Wood Turning Lathe Tools Set, 30' 4Pcs Upgrade Sharp Lathe Rougher Finisher Swan Neck Hollower Tools with Durable Free Combination Alloy Handle Include Round Square Inserts

【High Efficiency Tool】MYKASEN lathe turning tools is developed for experienced or novice woodworkers. It can keep sharp for a long time. When the tool becomes dull, the tool can be replaced in just a few seconds, without the need to sharpen it. It is a high-efficiency tool..
【Value Pack】The carbide turning tools set includes 4 types of tools (rough/detail/finishing/) to meet different grinding needs. Equipped with 1 handle and 1 extension handle at the same time, which can be used alternately. We also thoughtfully prepared a pair of protective gloves to ensure your safety during use..
【Dimension and Material】Matched with 4Size Carbide Cutters Inserts(1pcs Square11 × 11 × 2.0mm-30°, 1pcs Round 12 × 2.5mm-30°, 1pcs Round 8.9 × 1.85mm-30°, 1pcs Diamond 10×30mm with Radius Point), We provide high-quality products, hard alloy blades, stainless steel rods, aluminum alloy handles and shells. Everything in this tool set is dynamic and reliable..
【Interchangeable Grip Handle】We provide two smart and interchangeable handles. They can be used alone or connected together. The length of a single root is 280mm, and the combined length can reach 500mm. Clever design. However, for safety reasons, be sure to tighten the two tool rods before use..

Check Stock

FJL FORCE Lathe Tools Set of 4, Mirror Polishing Wood Lathe Tools Latest Version Carbide Lathe Tools, Carbide Turning Tools, with Diamond Round Square Carbide Inserts

【PRODUTCS INCLUDE】 - Carbide lathe tools including:(1)11" handle(2)7.9" wood turning tools including square,round,diamond,rounded(3)easy to replace the cutting head of the T15 wrench,all parts are made of special hard sponge full fit wrapped and placed in a packaging box..
【REFUSE TO LOOSEN】 - Some common wooden handle carbide lathe tools will feel a certain degree of looseness or even fall off at the connection between the handle and the tool bar after 25 to 30 days of use.In contrast,the high-quality aluminum alloy handle,stainless steel handle all-metal material,double insurance carbide turning tools fixing structure can free you from the worry of product sturdiness in full..
【HIGH CUTTING EFFICIENCY】 - The sharp high-density tungsten lathe tools cutting edge allows you to confront the wood as if a hot knife cutting butter as simple and smooth,compared with other typical carbon and high-speed steel material cutting head more durable,if wood turning tools becomes dull,just use the included T15 wrench to change the blade direction,you will have a fresh,clean cutting edge again..
【EASY TO CONTROL】 - Whether it is the frosted aluminum handle of the wood lathe ,or the high- speed steel material of the knife shank,the mirror polished f....

Check Stock