ReviewsCarbon Fiber 500

SCITOO 350MM/14inch 3" DEEP DISH Red Stitch PVC Leather Car Racing Steering Wheel Sports Drifting Wheel &Horn Button Aluminum Black

  • ...reases, the LED gradually lights up in green. When the RPM configured by the user is reached, the indicator light will flash red as a reminder of upshifting. LED shift indicator, adjustable from 500RPM to 9900RPM, LED shift light color, adjustable RGB color..
  • ⭐ 3K Glossy Carbon Fiber: 3K Glossy Carbon Fiber, coated with 1mm/0.04in thick epoxy coating, therefore, this gives the carbon fiber wheels extra protection against oxidation. It has high-quality surface finish and high heat resistance. The carbon fiber is constructed symmetrically and uniformly, with no twisted structure..
  • ⭐ Flat-bottom racing design: The flat-bottom racing design also increases legroom, which is directly suitable for all vehicles with manual gearboxes. It will also be suitable for automatic transmission vehicles, but the trim panel, wiring harness and gear shift mechanism need to be replaced from the existing steering wheel to a new steering wheel..
  • ⭐Features: Upgraded customized steering wheel, all stitches are hand-sewn by experts. Flat-bottomed D-shaped racing car design, LED shift indicator game display, red stitching, finger ridges de....
Check Stock

Readytosky® S500 Quadcopter Frame Stretch X FPV Drone Frame Kit PCB Version with Carbon Fiber Landing Gear

  • ★ S500 is the quadcopter frame for upgrade F450 FPV Frame Kit..
  • ★High quality PCB version carbon fiber material and exquisite design..
  • ★PCB Center plate with solder point ,good qiality carbon fiber landing gear.
  • ★Good work with Gopro Hero 3 2 Axis brushless gimbal for FPV.
  • ★Learned arm design from DJI S800 EVO, and enhanced..
Check Stock

PRILINE Superhard Carbon Fiber Polycarbonate 1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool,Black

  • Material: Carbon fiber PC - Color: Black - Weight: 1 KG (approximately 2.20 lbs) Spool.
  • Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
  • Recommended Printing Temp/Nozzle Temperature: 240-260°C (464-500°F), Base Plate Temperature: 80-100°C(176-212°F).
  • Performance Advantages: Superhard Carbon fiber Polycarbonate filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.
Check Stock

PRILINE Carbon Fiber Polycarbonate 1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm,Black

  • Material: Carbon fiber Polycarbonate - Color: Black - Weight: 1 KG (approximately 2.20 lbs) Spool.
  • Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
  • Recommended Printing Temp/Nozzle Temperature: 240-260°C (464-500°F), Base Plate Temperature: 80-100°C(176-212°F).
  • Performance Advantages: PRILINE Carbon fiber Polycarbonate filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.
Check Stock

ShareGoo S500 Quadcopter Fuselage Frame Kit PCB Version with Carbon Fiber Landing Gear Skide Kits

  • High quality PCB version carbon fiber material and exquisite design:S500 PCB 500mm Upgrade F450 Quadcopter Frame Kit with Landing Gear.
  • Compatible with Gopro Hero 3 2 Axis brushless gimbal for FPV.
  • Fast battery-mounted design. Battery replacement is quick and easy..
  • 6-hole motor installation, compatible with the majority of the motor In the market.
  • Center plate with solder point.Frame only, no electronic parts.Made Carbon Rod inside the arm,to make the arm hard and strong,not shake..
  • Frame only, no electronic parts,Anti-angle arm, increasing the stability of the flight at the same time minimize the power loss..
Check Stock

Delkevic Aftermarket Exhaust compatible with Honda CBR500R DS70 9" Carbon Fiber Oval Muffler Slip On 13-20

  • Delkevic DS70 9" carbon fiber oval mufflers are made from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler is loud and aggressive with or without the baffles installed..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

IKON MOTORSPORTS Front Bumper Lip Compatible with 2013-2014 Ford Mustang Exclude Shelby GT500 California Special IKON Style CFL Carbon Fiber Print Lower Chin Spoiler

  • Fitment: Compatible With 2013-2014 Ford Mustang (Will NOT fit Shelby/GT500/California Special).
  • Specification: Color: CFL - Carbon Fiber Print (Carbon Fiber Hydro Dip (Gloss/Smooth Finish) | Style: IKON Style.
  • Bolt on Installation,Instruction is NOT included, Professional Installation is Highly Recommended..
  • All of our front bumper lip go through an in-house test fitting process to reassure you that you are getting a high quality product that fits your....
Check Stock

Delkevic Aftermarket Exhaust compatible with Honda CBR500R 14" Carbon Fiber Oval Muffler Slip On 13-20

  • Delkevic Stubby 14" carbon fiber oval muffler is made from a pre-formed composite carbon fiber sleeve and 304 stainless steel. This muffler has an increase in sound from stock but can be fairly quiet in low RPM. This muffler is great if you want some sound but not too loud..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Arris 14mm 12mm x 14mm x 500mm 3K Roll Wrapped 100% Carbon Fiber Tube Matt Surface (2 PCS)

  • High Strength Carbon Fiber tubing - 2 x 2 Twill Weave - High Gloss coating.
  • 3K TOW - (3,000 filaments) High Strength Carbon Nano Tubes.
  • Outer Wall (20mm), Inner Diameter (18mm), Wall thickness (1mm).
Check Stock

Superfeet RUN Comfort - Carbon Fiber Orthotic Shoe Insoles - High Arch Support for Running Shoes - 7.5-9 Men / 8.5-10 Women

  • Cut to Fit: Superfeet insoles are made to be trimmed to fit your shoe.
  • follow cutting instructions before use. If you're between sizes, size up and trim down to fit.
  • Arch Support & Deep Heel Cup: These insoles cradle the heel in running shoes, while the foam cushion absorbs shock and minimizes fatigue.
  • arch support helps stabilize the foot while running, reducing stress on feet, ankles, knees.
  • Carbon Fiber and Foam Insoles: For reliable support and comfort for up to 12 months or 500 miles.
  • Moisture Wicking: Great addition to your walking or running shoes with long-lasting odor control.
  • Superfeet: Comfortable, durable carbon fiber shoe insoles for walking, running, hiking and working.
Check Stock

SainSmart 1.75mm Black ePA-CF Carbon Fiber Filled Nylon Filament 1KG (2.2lbs) Spool for 3D Printer

  • [Incredible Strong] We use a new formula to improve its rigidity and print performance: 75% nylon coupled with 25% carbon fiber, which is ready to take on your next project. With no less than 20% Nylon based carbon fiber SainSmart CF20 is Easy to print, with great surface finish and strength to take on some of your most demanding jobs..
  • [Lower Shrink Rate] It features with lower shrink rate, higher strength, and rigidity, less warpage and more resistant to wear and tear compared to the traditional nylon filament..
  • [Smooth Printing] Produce high-quality parts that are easy to process and look great.
  • all while delivering functionality, stiffness, dimensional stability and heat resistance in an easy to print material..
  • [Application] It is suitable for those looking to make both strong and flexible industrial parts, prosthetic, medical equipment, and complex costumes, etc. Optimal print temperatures of 260 - 280°C(500-536°F) with a build surface temperature of 80-90℃make it a great choice for professional and home 3D printers..
  • [Tips] Carbon Fiber is abrasive and in general, these fibers will rapidly accelerate the nozzle-wear of brass nozzles. It is highly recommended that you use nozzles made from Stainless steel or other hardened alloys. For better la....
Check Stock