ReviewsCarbon Fiber Car Part

Aootf Carbon Fiber License Plate Frame- Handcrafted of 100% Real Carbon Fiber Cloth Wrap Aluminum Frames | Stainless Steel License Plate Screws with CF Screw Caps | Gloss Black 2 Holes | Qty 1 Frame

Carbon Plate Frame: 100% true carbon fiber cloth, the package is made on an aluminum license plate frame, Grinded and polished by hand through 16 procedures.Stronger than the true 100% carbon fiber license plate frame, No cracking deformation, Very beautiful twill weave pattern. PLEASE NOTE: This carbon fiber license frame is NOT 100% true carbon fiber frame.Made of :100% handmade + Aluminum license frame + Carbon cloth-HIGH COST. This link ONLY SELLS 1PACK LICENSE FRAME.
Perfect Fit Installation: Suitable pore size install licenses!!! More Multi-variety stainless steel license plate screws,You do not need to go to hardware store.Frame suitable for BMW license plate(NO BMW logo), Mercedes Benz, AMG, 4RUNNER, AUDI, LEXUS, Front license plate frame or rear frames installation. Improve your car appearance and match with your car's other high quality carbon.
Cool License Plate Frame: Well Made High Gloss Clear Finish protective coating. The Smooth shiny surface really pops!. Exclusive carbon fiber license plate frame screw caps, license plate frames and cover better match carbon license plate frame. Front license plate frame or rear frames installation. Improve you....

Check Stock

Flying Banner car seat Covers Protects Water Proof Faux Leather Carbon Fiber Front and Rear Bench (Gray Black, Full Set -- 9PCS)

Universal size, can fit most of low back car seats, can not fit low back car seats with side arm rest..
Airbag compatible, can fit front seats with side airbag,.
Easy installation, no need to dismantle your car seats,.
Rear Bench split, rear bench can split into 40/60 50/50 60/40 via 3 zippers, you can also take off one or two part of zipper part to minimize the size of rear bench to suit the rear bench size..
Face materials are Carbon Fiber leather and Faux leather, easy clean..

Check Stock

Black Leather Carbon Fiber Gear Lever Shift Knob for to-yo-ta Alphard Crown Lexus Camry RAV4 Land Cruiser Hiace Corolla Mazda M8x1.25

Material: wear resistant microfiber leather and ABS with carbon fiber surface. Color: black leather, carbon fiber and chrome color..
Size: 9.3cm*5.8cm*5.2cm (detail Dimensions show in the picture), Package Content: Gear Shift Knob*1.
Fits most shifters with 8mm thread diameter size (M8 x 1.25). The compatibility list shown in the picture is not fully complete so if your car model....
Very good quality and unique design, perfect replacement! Easy to install, just remove the old part and install the new part. (Please press the shift....
This shift knob can just fit 8mm shift stick, not for 10mm or 12mm. We mark the size in the picture already, please check the size before buying!!.

Check Stock

Limsas Carbon Fiber License Plate Frames Black, 2 Pack Car Plate Frame with Carbon Coasters Front and Rear Slim Thin License Plate Frame Aluminum Metal Rust-Proof Universal Car Tag Holder

You Will Get - The product comes with specially customized carbon fiber pattern coasters and carbon screw caps. And package contains installation tools, you don’t need to purchase them separately, they are durable and not easy to rust. Including 2 carbon fiber license plate frames, 4 cup washers, 4 screw caps, 4 screws, 1 screwdriver and 2 coasters. The supporting carbon fiber license plate frame highlight your life style, and reflects the elegance and premium of your car from the details..
Carbon Fiber Surface - Classic and elegant license plate frames made of stainless steel, surface printed glossy carbon fiber pattern. After professional polishing technology, the surface is smooth and has no sharp edges, no need to worry about scratching your license plate and hands. The carbon car plate frame ensures greater strength and durability, prevents the license plate from rusting or being damaged. A classic look makes your car more elegant and stylish..
2 Holes & 0.6 Inch Ultra Slim Edges Design - The thin license plate frame is designed with 2 precise holes and professionally ground, will not scratch your loved car. The ultra-thin border license plate frame is specially designed, and will not cover the state name and registration label or other impor....

Check Stock

L.A. Road Trip - BMW i8

【Cost-Effective】Our carbon fiber license plate frames, which is customized for US car owners. It's a great choice for protect the license plate frames and showing individuality..
【Carbon Fiber Printing】: The carbon fiber printed on the surface of the aluminum alloy frame, which is look like Real Carbon Fiber License Plate Frame(NOT Real Carbon Fiber License Plate Frame). Ensuring product quality and combined with beautiful appearance. This is really nice license plate frames for women and man..
【Premium Aluminum Alloy】Our license plates holders adapt multi-protection layer to ensure that there will be no fading or rust problems. Unique technology makes the surface more smooth. Made of high hardness and thicken aluminum alloy, the material is light weight but still durable, which will protect better your license plates..
【Great Design】 The license plate covers size is 6.3 x 12.2 IN, which is fits all US and Canada 6 "x 12" standard. And our stylist base on US license plate characteristic, it will not block in all four corners of the plates state registration tags and to ensure that it’s legal on the road..
【EASY to INSTALL】Our license plate bracket package include all installation accessories and we have extra present(four tire valv....

Check Stock

6D Carbon Fiber Vinyl Self Adhesive Film, High Gloss Black Carbon Fiber Vinyl Wrap Sticker Wrap Roll with Air Bubble (1ft x 10ft)

SIMPLE OPERATION:6D High Gloss Black Carbon Fiber Vinyl Wrap easy adhesion, durability, heat insulation, with air bubble free, high gloss, a strong sense of reality, suitable for a temperature difference of - 40 ° C ~ + 180 ° C, the novice can also use it quickly.
MATERIAL: PVC material,flexible even at room temperature, can be installed directly. Creases and air bubbles can be removed by applying heat and using a squeegee, the product will be more flexible, can be applied to the curved surface, and easy to attach.
WITH AIR BUBBLE RELEASE: 6D High Gloss Black Carbon Fiber Vinyl with air bubble, can easily release air and install, even beginners can also use car film easily. It can be installed directly at room temperature,Creases and air bubbles can be removed by applying heat and using a squeegee, which will make the sticker more flexible and easy to use, Does not leave adhesive residue behind when removed.
WIDE APPLICATION: 6D High Gloss Black Carbon Fiber Vinyl Wrap product is very suitable for DIY, It can be used not only for the exterior of the car, but also for the interior, Bicycles, motorcycles, smart phones, tablets, furniture, all smooth surfaces can be used.
MULTIPLE SIZES AVAILABLE: The size of the 6D carbon fiber car wrap vinyl roll is 30*....

Check Stock

YIUIY Side Skirts Extension Rocker Panel Splitter Kit Universal 86.6 Inch/2.2M Compatible with BMW Mercedes Benz Audi Lexus Infiniti Mazda & More

About Adaptation:Product may be trimmed in order to accommodate vehicle's side skirt length.
Great Applicability: Three-section combined side skirts, suitable for side skirt of 31.5"/80 cm to 86.6"/220 cm. Length of each section: part A- 22.8''/58 cm, part B - 32.3"/82 cm, part C- 31.5"/80 cm (Picture shown) Length Can Be Cut Racing universal side skirts improve the appearance of the car, enhance the protection, and make the car stylish and cool.
Quality Material:The side skirt rocker panels extensions are made of Carbon fiber style.Not afraid of high temperature,corrosion resistant,safe and anti-impact for long- lasting reliability..
Features:Having side skirts are not only make your car’s appearance beauty,but also they can improve functions of your car..
Note:Please measure your vehicles length prior to purchasing. If you have any question please contact us..

Check Stock

HTVRONT Black Carbon Fiber Vinyl Wrap, 5FT x 1.5FT 3D Carbon Fiber Wrap for Cars, Matte Black Automotive Vvinyl Wraps

[1.5FT X 5FT] Our product is one roll of matte black carbon fiber vinyl wrap which size is 1.5ft x 5ft. (Notice: this product doesn't include a free knife and squeegee.) Our black vinyl wrap has a paper tube to keep vinyl from damage. The 3D texture wave looks super sharp and glossy. You will love it!.
[DURABLE] Our carbon fiber wrap remains sticky for an extremely long time. Carbon fiber vinyl won't shrink or peel in sunlight. It is anti-UV. Carbon vinyl wrap is easy to stretch after heating. You can use a heat gun to easily make creases and wrinkles disappear..
[EASY TO USE] Our automotive vinyl wraps are easy to install. The air release function of car wrap vinyl can let you easily push out creases and bubbles. In addition, our matte black vinyl wrap is easy to lay flat on the curves without getting wrinkles. Notice: to keep the pattern intact, please don't stretch the vinyl too much and use the wrong direction..
[WIDE APPLICATION] Vehicle wrap vinyl is suitable for a lot of vehicles such as cars, motorcycles, boats, and other autos. You can use vinyl wrap carbon fiber to decorate your vehicle's interior and exterior. The black car wrap vinyl can make your car looks more quality..
[GREAT SERVICE] We have been providing practical and quality-assured vi....

Check Stock

4PCS Car Door Handle Protector Sticker, Universal Carbon Fiber Anti-Scratches Auto Door Handle Protective Film, Car Door Side Paint Cover Guard Stickers Fit for Most Car Handles （Clear）

【Add Fashion & Prection】: Protecting your door cups is fast and simple with our Door Cup Paint Protection film which is made of carbon fiber material. Our product can protect your door handle cups from scratches and scuffs, keeping your vehicle pristine with minimal effort or technique. With modern carbon fiber texture design, it can also improve your car's appearance..
【Firm & Markless】: The door handle sticker has a strong adhesive that makes it stay firmly in place. In addition, it will not leave any marks on the surface of your car when you remove it..
【3D Carbon Fiber Texture Vinyl Stickers】: Our car door handle stickers is made of high-quality carbon fiber self-adhesive. All films are fully waterproof, self adhesive, easy to install, UV Sun radiations do not damage or change the colors and are perfect car paint protection film that retains its durability even after years..
【Easy to Install】: 1. Clean car door handle cup and let it dry.
2. Tear off the protector film from adhesive backing.
3. Stick film onto the cup and adjust the perfect position..
【You Will Get】: There are a total of 4 pieces of car door handle cup protective film in the package, the number is sufficient to support a long time use..

Check Stock

Meta Quest Pro

Material: The car key chain is made of genuine leather., carbon fiber sport style, which is good in hand, light and strong, more beautiful and more durable. The key ring is made of zinc alloy., which is beautiful, durable, Can be used with confidence..
Carbon Fiber Style: The leather carbon fiber design can be hung on the hook, and the keychain hook is curved design, which is convenient to hang on the belt and not easy to hook the corner of the clothes. Quick release spring structure, can be pressed multiple times, not easy to break. Two methods of use can be used flexibly. Bring convenience to your life.
Wide Application: Multifunctional leather metal keychain, the keyring is compatible with most car keychains, Fo Volkswagen, Chevrolet, Nissan, Honda, Jeep, Mercedes, Toyota, Hyundai, Land Rover, Ford, Dodge, etc. And this keychain can also hook motorcycle keys, truck keys, bicycle keys, RV keys, office keys, home keys, storage room keys and other gadgets, etc. Bring convenience to your life..
Wonderful Gift: Our carbon fiber leather and metal keychains are a great gift for someone special, and the shiny keychains catch the eye. You can give it to your girlfriend or boyfriend, wife or husband, sister, daughter, mom or friend as a gift for graduati....

Check Stock

Valve Cover Engine Valve Carbon Fiber Style Spark Plug Cover, Valve Cover Gasket is Compatible with Honda VTEC B18 B16 B Series（Black）

【Perfectly Matched Engine Valve Cover】 The valve cover is installed on the car engine, which can protect your car engine and keep it clean (features: seal the engine so that the lubricating oil does not leak).
【Valve Cover Gasket Set Compatible Models】 Compatible with 1992-2001 Acura Integra (GS-R), compatible with 1997-2001 Acura Integra (R type), compatible with 1999-2000 Honda Civic sports car (Si), compatible with 1994-1997 Honda Del Sol (VTEC) Etc..
【High-Quality Valve Cover Gasket】 It is made of durable plastic carbon fiber, has a striking twill weave, and adds a unique engine valve spark plug cover, which is light in weight, high in strength, stylish & durable..
【Valve Covers Light Weight】Lightweight carbon fiber, release the old wildness of your car, is definitely an ideal substitute for old parts, and improve dynamic performance. For power enthusiasts, carbon fiber hood should be their real choice..
【Low Price & Low Noise & Easy Installation】 The engine cover is affordable, and the plastic carbon fiber style is cheaper than metal, and it can insulate noise better than metal. Easy to install, no need to drill and cut. (The weight is only 0.2kg).

Check Stock