ReviewsCarbon Fiber Tape Carbon

Spurtar Rear Spoiler 4.9ft (150cm), Universal Car Trunk Spoiler Roof Lip Kit with Glossy Black Carbon Fiber Pattern fits Most Cars, Punch-Free Installation

  • ENVIRONMENTAL: Spurtar 3D carbon fiber rear spoiler creates better aerodynamic effect and geometry to your sports car. Vehicles with 3D front spoiler, roof wing, rear spoiler are economical, safety and environmental..
  • MATERIAL: Made of High Quality soft rubber material with carbon fiber surface with a glossy and bright finishing. Any bending, trimming, free cutting, matching makes it is ideal spoilers for cars. Comes with double sided tape and two end pieces for easy installation (no tools required).
  • SIZE: Length at 4.9 feet (150cm/1.5m) 4.9' x 1.75" x .875" long, Come with double-sided tape on back (extra security for the larger width 1.75" 45mm). Features easy peel and stick on installation.
  • QUICK AND EASY: Spurtar Carbon Fiber Spoiler is easy to bend, trim arc and glue. Firstly, measure the location and (if need) trim the Spoiler at the size of the choosen position. Two end-caps are included to seal the cutted ends! Clean the location from dirt, sand and dust and glue at the choosen location.
  • ONE SIZE FITS ALL: Spurtar Car Spoiler fits for most of the cars. Give your car the sturdy and sports look..
Check Stock

Orion Carbon Fiber Hood 60' x 80' Wrap Film Twill Vinyl Sheet Roll - 3D Carbon Fiber

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish.
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface.
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

Jie Norman Rear Bumper Diffuser W/ LED Carbon Fiber Style Fits 2014-2017 Infiniti Q50 Lower Bumper Lip Spoiler Valance Protector

  • Fit for 2014-2017 Infiniti Q50 all 4 Door Sedan models. Will Not Fit 2018 and Up Models.
  • Come with brake led light, the red lighting is eye-catching, ensure the safety of the drive..
  • Made of top-grade Durable PP material. The material is not the carbon fiber, but with a carbon fiber style looking..
  • Easy installation. Just use the double-sided adhesive tape to finish installation or Bolt-on installation. With 3M tape, screws don't include..
  • If you have any quality problems, please contact us as soon as possible..
Check Stock

Acmex Rear Spoiler Wing Fits for 2008-2012 BMW E90 M3 Sedan & 2006-2011 E90 3 Series Sedan Trunk M4 Style 323i 325i 325xi 328i 328i xDrive 330i 330xi 335i 335d 335i xDrive M3 (Carbon Fiber)

  • ★【FITMENT 】This rear spoiler is compatible with 2006-2011 E90 3 SERIES Sedan 4 DOOR & 2008-2012 M3 Sedan 4 DOOR. Check the fitment picture carefully before to ensure proper fit your vehicle..
  • ★【MATERIAL】 This rear trunk spoiler is made of top-grade ABS plastic with a polished surface and UV-Protected clear coating. Lightweight and streamlined design helps to reduce wind resistance, promote motion appearance, improve driving stability and safety..
  • ★【CARBON FIBRE STYLE】Use hydrographic transfer printing technology to get a carbon looking, the material is not real carbon fiber but with a carbon fiber style looking. This spoiler can also make your car more luxurious..
  • ★【M4 Type Spoiler】: Will dramatically improve the sporty appearance of your car. The new spoiler works fine and enhances overall performance in handling and durability. Add more downforce and help aerodynamic..
  • ★【Quick Installation】: The double-sided tape is already attached to the spoiler. Peel off the tape on the back then stick the spoiler on the lid of the trunk. Very easy and quick installation without drilling or modification..
Check Stock

F & B LED LIGHTS Silver 3D Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap (12' X 60', Silver)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

DIYAH 3D Yellow Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap DIY Decals 12' X 60' (1FT X 5FT)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

F & B LED LIGHTS Red 3D Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap (60" X 60", Red)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

F & B LED LIGHTS Red 3D Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap (12" X 60", Red)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

DIYAH 3D Black Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap DIY Decals (120" X 60" / 10FT X 5FT)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

DIYAH 3D Red Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap DIY Decals 12" X 60" (1FT X 5FT)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

HANSSHOW Compatible Tesla Model 3 / Y Dashboard Cover Wrap Real Carbon Fiber, Matte and Gloss Black, 3K Toray Dry Carbon Fiber for Tesla Model 3 2018-2023 and Model Y 2020-2023 (Matte Carbon Fiber)

  • 3K Carbon Fiber Cloth: Carbon fiber 3K is a new type of carbon fiber material with high strength and high modulus fiber with carbon content of more than 95%. Its density is only 1.6G/CM3, which is lighter..
  • Toray Carbon Fiber: Adopt Japanese Toray carbon fiber cloth, with clear lines and long service life. The resin backflow will not produce bubbles, and the carbon cloth pattern will not be deformed and distorted..
  • Dry carbon fiber: Dry carbon fiber has less residual resin, more uniform resin, light weight and high strength..
  • Workmanship: Autoclave dry carbon workmanship..
  • If damaged during shipping, please contact us to send a replacement..
Check Stock