ReviewsCarbon Fiber Tubes

QWinOut ARF/PNP Full Set Hexacopter DIY Drone Kit Tarot 690mm Frame with 750KV Motor GPS PIX 2.4.8 32 Bit Flight Controller (ARF)

  • Tarot FY690S Full Carbon Aircraft Frame 3K Folding Hexacopter 690mm FPV TL68C01: Uses Toray carbon fiber 3K woven CFRP plate and 3K carbon fiber hollow tubes of pure carbon fiber ( non- 3K glassy carbon tubes ) full CNC machining . Design standards higher than similar products , the entire chassis weighs only 600 grams . S version with ?16MM new multi-axle motor mounts, new brushless ESC bit back , can be directly tied to use..
  • PX4 PIX 2.4.8 Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD: – Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system.
  • – Integrated backup power supply and failure backup controller.
  • redundant power input and fault transfer function.
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model.   3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.   E....
Check Stock

Leofoto LS-365C CF Carbon Fiber Travel Tripod Legs 5 Section Ranger Series

  • ► Made of TORAYCA carbon fiber, rhombus cross pattern tubes ► 10 layers of 100% carbon fiber ► CNC precision machined from 6061/7075 aluminum alloy.
  • ►Max height 60" (1520mm).►Min Height 3.1" (80mm).► Folded Length 18.9" (480mm).►Weight: 3.9lb (1.77kg).
  • ►Leg Section Diameters: 36mm, 32mm, 28mm, 25mm, 22mm.
  • ►Max Load: 44lb (20kg). ►3 position leg Locks 23° 55° 85°.
  • ►Includes: ►Carry Case ► Tripod Spike Set ►Sandbag Hook ►Multi-Tool.
Check Stock

QWinOut DIY F450 450mm Airframe 2.4G 6CH RC Quadcopter ARF Combo Full Set Drone with GPS APM2.8 Flight Controller (All Parts Included for Ready to Fly, Unassembly)

  • Tarot FY690S Full Carbon Aircraft Frame 3K Folding Hexacopter 690mm FPV TL68C01: Uses Toray carbon fiber 3K woven CFRP plate and 3K carbon fiber hollow tubes of pure carbon fiber ( non- 3K glassy carbon tubes ) full CNC machining . Design standards higher than similar products , the entire chassis weighs only 600 grams . S version with ?16MM new multi-axle motor mounts, new brushless ESC bit back , can be directly tied to use..
  • PX4 PIX 2.4.8 Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD: - Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system.
  • - Integrated backup power supply and failure backup controller.
  • redundant power input and fault transfer function.
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model.   3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.   Expansion feedbac....
Check Stock

Leofoto LS-223CEX Carbon Fiber Tripod CF 3 Section + Built-in Leveling Base 15?Tilt Ranger Series

  • ►Made of TORAYCA carbon fiber, rhombus cross pattern tubes 10 layers of 100% carbon fiber CNC precision machined from 6061/7075 aluminum alloy. ►Built-in Leveling Base with 15° Tilt.
  • ►Max height 317mm. ►Min Height 73mm. ►Folded Length 220mm..
  • ►Leg Section Diameters: 22mm, 19mm, 16mm.
  • ►Max Load: 11lb (5kg). ►Weight 1.34lb (0.61kg) . ►3 position leg Locks 25° 55° 85°.
  • ►Includes Carry Case & Tripod Spike Set.
Check Stock

Leofoto LS-324C Ranger Series Tripod Legs Carbon Fiber CF 4 Section & Add-On Center Column

  • ► Made of TORAYCA carbon fiber, rhombus cross pattern tubes ►10 layers of 100% carbon fiber CNC precision machined from 6061/7075 aluminum alloy.
  • ►Max height (without column) 54.1" (1305mm).►Max height (with add on column 64" (1620mm)) 54.1" ►Min Height 3" (78mm). ► Folded Length 18.9" (480mm)..
  • ►Leg Section Diameters: 32mm, 28mm, 25mm, 22mm.
  • ►Max Load: 33lb (15kg). ►3 position leg Locks 25° 55° 85°.
  • ►Includes Add-on Center Column, Carry Case & Tripod Spike Set.
Check Stock

KARBXON – Carbon Fiber Tube - 6mm X 4mm x 1000mm – Pultruded Round Hollow Carbon Fiber rods Black Matte Finish - Pure Carbon Fibre Hollow Tube shafts - for RC Planes-Drones, Boat DIY Craft Projects

  • Easy to use and modify can be cut with fine tooth blades.
Check Stock

Leofoto LS-284CEX Carbon Fiber Tripod CF 4 Section with Built-in Leveling Base 15° Tilt Ranger Series

  • Made of TORAYCA carbon fiber, rhombus cross pattern tubes 10 layers of 100% carbon fiber CNC precision machined from 6061/7075 aluminum alloy Built-in Leveling Base with 15° Tilt.
  • Maximum Height:1475mm (58"). Min Height 3" (78mm). Folded Length 21" (535mm)..
  • Leg Section Tubular Diameters: 28mm, 25mm, 22mm, 19mm.
  • Max Load: 22lb (10kg). 3 position leg Locks 25° 55° 85°. Weight 1.33kg (2.93lb).
Check Stock

Leofoto LS-223C Portable Light Weight Carbon Fiber Tripod,Ranger Series,Center Column Not Included

  • ►LEGS: ►Made of TORAYCA carbon fiber, rhombus cross pattern tubes ► 10 layers of 100% carbon fiber ► CNC precision machined from 6061/7075 aluminum alloy.
  • ►LEGS:►Max. height: 1480mm Min.Height: 80mm Folded length: 540mm.
  • ►LEGS:►Leg Section : 4 Max load: 25kg Weight: 1.77kg.
  • ►HEAD ►LH-40 Low Profile. ►40mm Ball Diameter. ►Independent Pan Lock Knob. Max load: 20kg (44lbs) ►Low Center of Gravity.► Bottom thread: 3/8" with 1/4" adapter.
  • ►KIT:►Includes: ►LH-40 Ball Head►70mm QR Plate ►Carry Case ► Tripod Spike Set ►Sandbag Hook ►Multi-Tool.
Check Stock

Leofoto LS-324C+LH-40 Tripod Kit LH-40 Carbon Fiber CF 4 Section & 40mm Low Profile Ball Head

  • Made of TORAYCA carbon fiber, rhombus cross pattern tubes 10 layers of 100% carbon fiber CNC precision machined from 6061/7075 aluminum alloy.
  • Max height (without column) 54.1" (1305mm).Max height (with add on column 64" (1620mm)) 54.1" Min Height 3" (78mm). Folded Length 18.9" (480mm)..
  • Leg Section Diameters: 32mm, 28mm, 25mm, 22mm.
  • Max Load: 33lb (15kg). 3 position leg Locks 25° 55° 85°.
  • Includes LH-40 Low Profile Head & QR Plate, Add-on Center Column, Carry Case & Tripod Spike Set.
Check Stock

Exacme 15 Foot Outdoor Round Trampoline 400 LBS Weight Limit with Premium Enclosure Carbon Fiber Surrounded Net, L15

  • T-JOINT Structure: Stable and sturdy. The frame tubes and leg extension tubes are fixed by the T-joints. Compared with trampoline with screws, T-joint structure makes the whole steel frame more stable and sturdy, making bouncing secure.
  • CARBON FIBER RAIL SUPPORT: Top of trampoline net is supported by 12 carbon fiber rails, which is in high strength and corrosion resistance, will better withstand storm. This reduces net sagging, increases its lifetime and enlarges the inner space. Making you enjoy stereo sense and wider FOV.
  • 400 LBs WEIGHT LIMIT: Thanks to heavy duty galvanized steel frame, T-joint structure, 6 U-legs and 108pcs galvanized 7” springs, the trampoline is sturdy and can afford 400 lbs maximum weight limit.
  • SPRING COVER PROTECTION: The safety spring cover is filled with elastic foam inside. This covers springs and steel frame 360° and is comfortable when stepping on it, effectively protecting kids from getting caught or slipping onto the spring and provide safety guarantee every angle on trampoline. You can also sit on it to take a short break when getting tired.
  • BASKETBALL HOOP TO CHOOSE: Best Gift for Kids. Basketball hoop is a great addition to trampoline. It not only allow kids to play basketball while bouncing, but also attrac....
Check Stock

ARTCISE Stable CS80C 32.5mm Lightweight Compact Carbon Fiber Tripod with 44mm Low Profile Ball Head Kit Max Load 25 kg

  • 【Ultra-Stable Carbon Fiber Tripod】 The CS80C carbon fiber Birdwatching camera tripod is made of top-notch carbon material and craftsmanship. It is made of 10-layer carbon fiber leg tubes and aluminum alloy material, which is firm and stable, the leg diameter of the tripod is 32.5mm-29mm-25.5mm-22mm to ensure that the Max load 44 lbs /20 kg, Tripod Net Weight: 3.68 lb/1.67kg, Using Height from 4.72in/12cm to 63.4in/161cm.
  • 【44mm Low Profile Panoramic Tripod Head】 Low Profile Design with a super big 44mm ball diameter reduces the center of gravity by 15%, which makes it have better stability. CNC super processing, Anodized surface treatment, with a very smooth feel and excellent durability. The weight is only 0.47kg /1.04lbs, but it provides a load capacity of 55.1lbs/25KG (Ball head comes with a second arca swiss quick release plate).
  • 【Multi-function Carbon Tripod Kit】: Detachable Monopod Function, it can be used as a monopod or trekking pole for hiking in the field External accessory hole+ Gift magic arm and phone clip, phone mount and LED light can be mounted on the tripod.Personalized Lever lock stone bag, Tripod head, Lens filter and other accessories ....
Check Stock