ReviewsCarbon Or Alloy Steel

Commando Lock Heavy Duty Steel Padlock - Strong & Durable, High Security Military Grade Weatherproof

STRONG & DURABLE: Commando Locks Carbon-Steel Padlocks are designed to last! The unique interlocked riveted construction and recurved design defend against hammer blows and theft. 2 Keys included per lock (2 Pack = 4 Keys.
WEATHER RESISTANT: The zinc-plated carbon steel is highly rust and corrosion-resistant. With rust-resistant zinc coating and dual-hardened alloy steel, these locks are perfect for outdoor use..
TOUGHER TO CUT: Steel-alloy shackle is 50% harder to cut than case-hardened steel. Commando Locks are ideal for all security uses including doors, lockers, cabinets, storage units, gates and gun cases..
MILITARY GRADE: Meets and exceeds US Military standards and manufactured to aerospace tolerances for the highest quality and security. Locks are guaranteed for life..
HIGHLY PICK & BUMP RESISTANT: High-security cylinder with 10 security pins for ultimate anti-pick technology. Exceeds ASTM F883-09 for bump resistance..

Check Stock

11.5 x1.57 x0.06 15N20 Steel Flat Stock Bar Hi Contrast Blade Billets Blanks Annealed High Carbon Steel Barstock for Professional Hobbyist Use Making Forging Carbon Damascus Knives DIY 2 Pieces

Adequate Quantity: you will receive 2 pieces of 15N20 steel bar stock, the ideal tool steel chosen by the tool manufacturer, sufficient quantity to meet your daily use and replacement needs.
Suitable Size: the length of 15N20 steel flat stock is 11.5 inches/ 29.3 cm, width is 1.57 inches/ 4 cm, thickness is 0.06 inch/ 0.15 cm, the right size for you to build your own knife, to provide you with long service.
Alloy Content: bar stock for knife making is an alloy of iron with 0.75 percent carbon, 0.3 percent silicon, 0.4 percent manganese, 0.02 percent phosphorus, 0.02 percent sulfur, 0.01 percent chromium, 0.01 percent ni and 0.01 percent vanadium.
Quality Steel Plate: 15N20 is a bright, acid resistant, wear resistant metal, usually applied with high carbon steel forging, durable, can be applied with confidence.
15N20 is applied with other high carbon steel such as 1095 to forge Damascus knife.
If it is etched with ferric chloride and no obvious light is found, it may be a problem with the last step of polishing.
Widely Applicable: high carbon steel has nice toughness and grinding degree, which makes it ideal for a variety of handmade DIY blades, knives, hand tools, shims, and more.

Check Stock

3 Set Electric Guitar Strings Nickel Alloy Ball End Wound Carbon Hex Steel Strings Regular Light for Electric Guitar Crisp Tones 18Pcs(RX17)

Hex Carbon Steel Nickel Alloy: The strings are made of hex carbon steel nickel alloy, which has strong durability, clear tone and comfortable feel..
High Gloss: Strings with a good feel, high gloss, full tone, suitable for beginner guitarists..
Extend Tone Life: The strings can prevent common corrosion and debris accumulation, and extend the life of the tone than any other brand of coated or uncoated strings..
Crisp Tones: This is a string with the same crisp tone as uncoated strings..
Excellent Choice: The string is beautifully packaged, and is a great choice for your own use or as a gift..

Check Stock

LIVTE 12 Inch Heavy Duty Bolt Cutter, Hardened T8 Steel Bolt Lock Cutters with Soft Rubber Grip for Rebar Wires, Bolts, Steel Nails, Rivets and Chain Cutting

【High-Carbon Steel Cutting Edge】Forged with high-quality high-carbon steel, the cutting edge treated with high-frequency quenching to achieve a fast and powerful cutting effect. Maximum cutting handle capacity：4mm diameter..
【Alloy Steel Body】Built for tough cutting jobs, this 12 inch bolt cutter feature sturdy, hardened alloy steel jaws that are designed for maximum durability and cutting life..
【Non-Slip Grips】The ergonomic threaded grips fit down over steel handles for improved strength and comfort, not easy to slip down..
【Applications】The design of the lever principle for bolt cutters saves time and effort, ideal for cutting rods, bolts, soft metals, rivets, chains and fencing wire..
【100% Money Back】For this 12 inch heavy duty bolt cutter, if any quality problems, please feel free to come, a replacement or a full refund will be assured..

Check Stock

Cold Steel Dragonfly Katana, Black

The Dragonfly Katana is a beautiful sword with a distinctive teal-green silk cord-wrap and black same (ray skin) handles, complementing rich iron furniture with a dragonfly motif..
Steel: 1055 Carbon - The carbon content and lean alloy of this shallow hardening steel make this a very sturdy material that avoids a lot of the brittleness commonly associated with higher carbon materials..
Sam√ (Ray Skin) Handle with Teal Green Silk Braid Cord & Brass Menuki. Black Lacquered Wood Scabbard..

Check Stock

Metal Wood oscillating Multitool 6 Pcs Quick Release Saw Blades QTH062, Universal Desing, Compatible with Black & Decker, dewalt, makita, ryob,and Skill Bosch.

6PC contains 4 different kinds of blades, for cutting wood, plastic, and metal. each type of saw blade is designed for different purposes..
Made of alloy steel and high carbon steel, our oscillating multitool blades are manufactured with special techniques and thick gauge metals due to which it becomes durable for a long period..
Universal deisign, the blades are compatible with most tools..
Set contains: 1pc 87mm 3-1/2" semicircle saw blades, 2pc 35mm carbon steel saw blade (serration), 2pc 35mm carbon steel saw blade (Japan's tooth), 1pc 65mm carbon steel bending shovel.

Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.

Check Stock

Master Cutlery 3 Piece Marble Red Katana Sword Set

SET OF 3- The katana (longest), wakizashi (mid-sized) and the tanto (shortest) swords conveniently comes with an easy to assemble wood stand that....
INTRICATE DESIGN- The ornate markings on the scabbard tip, sheath pommel, sword collar and handguard feature a dragon that represents protection and....
QUALITY SET-Each of the swords have long curved carbon steel blades stored in stunning hardwood sheaths with zinc alloy facets. The red marble color....
GIFTABLE DISPLAY- This well-made quality sword set, and freestanding display will serve as a great conversation piece and an attractive gift for....
PRODUCT DETAILS- Materials: 1045 Carbon Steel, Zinc Alloy, Elder Ray Wood, & MDF Wood. Dimensions: Katana-(L) 40” x (W) 2.25” x (H) 3.25”.....

Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.

Check Stock

Tojiro DP Damascus 3-piece Knife Set

Set Includes: 4" Paring Knife, 6" Utility Knife & 8.25" Gyuto/Chef's Knife.
Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of premium cobalt alloy steel.
Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
Micarta handle with three stainless steel rivets.

Check Stock

LIVTE 2-Pack 14 Inch Heavy Duty Bolt Cutter, Hardened T8 Steel Bolt Lock Cutters with Soft Rubber Grip for Rebar Wires, Bolts, Steel Nails, Rivets and Chain Cutting,Yellow

【High-Carbon Steel Cutting Edge】Forged with high-quality high-carbon steel, the cutting edge treated with high-frequency quenching to achieve a fast and powerful cutting effect. Maximum opening: 13mm. Maximum cutting handle capacity：5mm diameter..
【Alloy Steel Body】Built for tough cutting jobs, these bolt cutters feature sturdy, hardened alloy steel jaws that are designed for maximum durability and cutting life..
【Non-Slip Grips】The ergonomic threaded grips fit down over steel handles for improved strength and comfort, not easy to slip down..
【Applications】The design of the lever principle for bolt cutters saves time and effort, ideal for cutting rods, bolts, soft metals, rivets, chains and fencing wire..
【100% Money Back】For these 2 pack of heavy duty bolt cutters, if any quality problems, please feel free to come, a replacement or a full refund will be assured..

Check Stock