ReviewsCarbon Steel Bending Tube

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Metal Wood oscillating Multitool 6 Pcs Quick Release Saw Blades QTH062, Universal Desing, Compatible with Black & Decker, dewalt, makita, ryob,and Skill Bosch.

  • 6PC contains 4 different kinds of blades, for cutting wood, plastic, and metal. each type of saw blade is designed for different purposes..
  • Made of alloy steel and high carbon steel, our oscillating multitool blades are manufactured with special techniques and thick gauge metals due to which it becomes durable for a long period..
  • Universal deisign, the blades are compatible with most tools..
  • Set contains: 1pc 87mm 3-1/2" semicircle saw blades, 2pc 35mm carbon steel saw blade (serration), 2pc 35mm carbon steel saw blade (Japan's tooth), 1pc 65mm carbon steel bending shovel.
Check Stock

4LifetimeLines 25' 3/16 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, Inverted Flare

  • Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed.
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing. Copper Nickel lines are ideal for vehicles experiencing harsh weather and environmental conditions.
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market.
  • We take pride in producing the best fuel, transmission and brake lines in the industry. Our Limited Lifetime warranty protects all of our products against defects for its entirety as long as it is installed correctly.
  • Complete Brake Line Replacement Tubing Kit Assortment - Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut.
Check Stock

RIDGID 36117 403 Instrument Bender, 3/16-inch Tube Bender for Bends Up to 180 Degrees, Pipe Bender,Black/Silver,Small

  • Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06 inches (1.5 mm) to a maximum of 180 degrees.
  • Made with offset cushion grip handles for improved comfort when forming 180-degree bends.
  • A 90-degree start angle and unique oil-absorbing shoe minimizes bending effort while forming accurate bends.
  • Features measurements in both inches and millimeters.
  • Tube bender has a 3/16-inch tube size outside diameter capacity and 5/8-inch bend radius.
Check Stock

GOSWIFT 10-inch Locking Sheet Metal Clamp, Heavy Duty Sheet Metal Grip Tool, Heat-Treated Nickle Plated Welding Plier

  • 【Adjustable Screw Tension】Screw-adjustable locking mechanism ensures maximum locking force, ideal for adjusting pressure to different job. 2 parallel plate-style flat tips for firmly gripping sheet metal without bending it..
  • 【Trigger Release Design】Classic trigger release quickly and effortlessly unlocks the tool. Punched steel plate handle with trigger release design ensures more clamping power and durability under high tension..
  • 【High Quality Material】It is constructed of High carbon Steel which ensures high durability and long lifespan. Heat treated steel with nickle surface finish is good for increased strength and corrosion resistance..
  • 【Wide Function】10-inch sheet metal tool is ideal for bending, shaping, and crimping sheet metal, making bending, forming, and crimping sheet metal easier..
  • 【Product Dimension】10inch , 25×10×6.8(10*4*2.7inch).
Check Stock

Bewinner Water Cooling Bending Kit, 3pcs 12mm OD 45/90/180 Degree Acrylic Hard Tube Bending Tool Set,Rigid Tubing for Computer Water Cooling System

  • Hard Tube/Acrylic Tube Bending Tool Set. AWGM3 series ABS multi-angle acrylic elbow dies, each set of three. ThisTube Bending Kit is suitable for computer water cooling system, allowing your DIY computer cooling system to be more beautiful and neat..
  • Fits for 12mm rigid pipe. The tube bending kit is suitable for 12mm support tube outer diameter, 12mm acrylic tube hot bending auxiliary angle positioning..
  • 45/90/180 curvature. The kit consists of elbow dies with different angles of 45, 90 and 180 degrees. You can choose different angles according to your needs to meet your diverse needs..
  • High strength ABS material. The angle of the positioning groove is accurate, and the mold is highly polished to ensure the best contact between the finished product and the mold. Bending kits require enough heat to bend (like a heat gun)..
  • 【QUALITY SERVICE】If the product has any quality problems or you have any questions about this product, you can contact us at any time,we have a 24-hour online professional customer service team.we will try our best to solve your problem in time,please rest assured to buy..
Check Stock

KAKA Industrial HB-8 Heavy-Duty 8 Ton Hydraulic Roll Cage Tube Bender, Solid Construction and High Precision Metal Tube Bender with 5 Dies

  • HIGH STABILITY. KAKA Industrial 8 ton hydraulic roll cage tube bender features as study design and solid steel frame.
  • the 8 ton forming jack will guarantee the stability when it is in use.
  • HIGH PRECISION. The precise tubing bending process can be realized with the support of steel forming dies and cast followers, which leave the material without flattening or defaming the edges.
  • FIVE DIES ARE INCLUDED. There are 5 different dies are delivered with this bender.
  • they are 3/4", 1", 1-1/2", 1-5/8", 1-3/4" diameter for round tubing.
  • SOLID CONSTRUCTION. The 8 ton tubing bender is build with quality material that can be lasted for many year heavy use. The solid steel frame and cast-iron base will both guarantee the durability of usage.
  • EASY OPERATION AND HIGH FLEXIBILITY. The tubing bender is hydraulic backed and hand-operated. The maximum bending angles can up to 90 degree. Five different dies allow quick change and increase flexibility. It would be a great tools for people who want to customize the tube components.
Check Stock

Fiblink Surf Spinning Fishing Rod 2-Piece Carbon Travel Fishing Rod (Length: 10')

  • Sensitive and Solid Carbon Fiber Construction - Carbon construction for improved performance-action and increased sensitivity. The rod delivers the extraordinary toughness of solid carbon fiber construction and precisely tuned action for boat fishing..
  • High Performance - Stainless steel mixed with ceramic guide makes it more smooth, avoids line stucking in the guides, minimize friction for smooth, long casts, while also enhancing sensitivity by transferring vibrations from the line through the guide to the rod and to your hand. The double footed stainless steel guide frames keep your line running straight..
  • Non Slip Rubber Shrink Tube Handle - Non slip rubber shrink tube handle with tapered rear grip Tip over butt ferrule connection for maximum strength and durability Machined tapered hood transitions above and below..
  • Extreme Exposure Reel Seat - Wheel seat with stainless steel tapered hood transitions above and below reel seat protecting cap..
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock