ReviewsCarbon Steel Joint

Boeray 10pcs 2 Hole Black 90 Degree Inside Corner Bracket Kit for 2020 Aluminum Extrusion Profile 20x20 Slot 6mm with 20pcs t nut + 20pcs hex Screw + 1pcs Wrench

Pcakage include:10 pcs bracket + 20 pcs tee nut + 20 pcs hex screw + 1 pcs allen wrench..
Material: bracket-high quality aluminum alloy.
hex screw-high quality 304 stainless steel.
Finish: painting,anti-rust and long life..
Used as joint plate for aluminum profile 2020 series..

Check Stock

Cadence Stout Spinning Reel and Vigor Spinning Rod

...to prevent corrosion and ensure reel longevity. A strong aluminum braid-ready spool allows you to tie braid directly to the spool without backing..
Smooth Performance: The Stout spinning reel has a 7 + 1 sealed ball bearing system that is anti-corrosive and delivers maximum smoothness during retrieval..
Powerful: The carbon fiber drag system delivers a consistent and powerful drag and has a max drag of 41 pounds. A 6.2:1 gear ratio gives you cranking power but also allows you to keep up with fast running fish. The stainless-steel main shaft provides an enduring performance that you can rely on and is also corrosion resistant..
Lightweight & Sensitive - The Cadence Vigor fishing rod is constructed from lightweight 30-ton carbon to give you an extremely sensitive blank..
Convenience & Top Performance – The Vigo fly rods are only available in two-piece actions which make transportation, backpacking and storage much easier. The joint itself is perfectly cut from each blank that performs as well as 1-piece rods. The vibrations still travel through the rod and don't stop at the joint so anglers can feel the slightest of bites when fish are picky..

Check Stock

CUESOUL Rockin Series 57\ 21oz Maple Pool Cue Stick Set with Joint Protector/Shaft Protector and Cue Towel G407

57inch length ,weight 21oz,butt made of imported dried hardwood,shaft made of hand selected and kiln dried North American maple wood.
Pearl paint finished with very cool pattern design on butt.
Stainless steel joint M/18,with Irish linen wrap.
Carbon Fiber Frerrule ,13mm Layered leather tips for ultimate ball control.
Come with cue stick joint protector and shaft protector,1 billiard towel,packing in blue carrying cue bag.

Check Stock

CUESOUL Rockin Series 57' 21oz Maple Pool Cue Stick Set with Joint Protector/Shaft Protector and Cue Towel G408

57inch length ,weight 21oz,butt made of imported dried hardwood,shaft made of hand selected and kiln dried North American maple wood.
Pearl paint finished with very cool pattern design on butt.
Stainless steel joint M/18,with Irish linen wrap.
Carbon Fiber Frerrule ,13mm Layered leather tips for ultimate ball control.
Come with cue stick joint protector and shaft protector,1 billiard towel,packing in blue carrying cue bag.

Check Stock

5/16-18 Center Hole Tab Weld Nuts/No Projections/Steel/Plain / 1,000 Pc. Carton

Application: Used for pipe furniture, tables and chairs, shelves and other threaded connection..
Advantages: Flat solder joints, high-quality steel ,good weldability, thread size accuracy..
Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..

Check Stock

OUTROAR GEAR Folding Scalpel Knife with Carbon Fiber Handle & 10 Pcs of No. 24 Replaceable Blades, Slip Joint Action, EDC Pocket Utility Knife

Durable and Lightweight - Ultralight carbon fiber handle with a built-in lanyard hole for the keyring. Weighs less than 1 Oz for effortless EDC in your pocket..
Surgical Precision - Each blade undergoes an advanced heat treatment process to ensure excellent precision. Experience an ultrasharp scalpel knife with an ergonomic shape for all utility tasks like paper cutting, box opening, DIY and craft work..
Replaceable Stainless Steel Blades - Comes with 10 extra #24 stainless steel surgical blades, which can be firmly fixed on the knife holder. When the blade becomes blunt, it can be easily removed and replaced with a new sharp blade (Compatible with #22/23/24 scalpel blades).
Perfect for Outdoors - Ideal for outdoor usage, camping, and fishing as the stainless steel blades have a high resistance against rust as compared to carbon steel blades..
Safety Features - Classic slip joint design secures the blade holder in place when closed or completely unfolded to keep you safe while using it..

Check Stock

MOTOCOCHE Heavy Duty Ball Joint Separator Kit Steering Knuckle Tie Rod Ends Remover 5 Sizes Forks 22mm 24mm 27mm 31mm 36mm, Adjustable Jaw Range (30mm~56 mm)

Product Function--This ball joint service tool allows you to effectively remove ball joint connections, remove tie rod ends, knuckle knuckles and lower control arms to replace a ball joint..
High Quality--Made of heavy duty carbon steel, chrome finish, high strength, toughness and will not rust. This compact tool ensure not damage the ball joints and rubber components..
Easy to Use--The jaw capacity range is adjustable, from 30mm to 56mm(1.18inch~1.96inch), allowing it to be configured for various stud lengths. Adding a little oil to the screw before use will make it easier for the ball joint to pop out of the steering knuckle and better protect the threads..
Wide Application--This Ball Joint Remover Kit compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. Compatible with Benz W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint..
Product List--This kit includes 5 sizes of interchangeable forks(22mm/0.86inch, 24mm/0.94inch, 27mm/1.06inch, 31mm/1.22inch, 36mm/1.41in....

Check Stock

BELEY Heavy Duty Ball Joint Separator Tool Tie Rod Ends Remover with Sizes Forks 22mm 24mm 27mm 31mm 36mm and Adjustable Jaw Range (30mm~56 mm)

...e with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. Compatible with Mercedes-Benz W211, W219, W220 and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4 and A6..
Heavy Duty Design -- The separator is made of heavy-duty carbon steel, with high strength, high hardness, thick and durable, and can withstand a large amount of potential energy without breaking, ensuring that the ball joint and rubber parts will not be damaged. Add a little oil to the screw before use to make the ball joint easier to eject from the steering knuckle and better protect the thread..
Adjustable Jaws -- The jaw capacity range can be adjusted (30 ~ 56mm/1.18 ~ 1.96inch), and can be adjusted to a suitable size to suit different sizes of ball joints. And equipped with 5 kinds of interchangeable fork sizes (22mm/0.86inch, 24mm/0.94inch, 27mm/1.06 inch, 31mm/1.22inch, 36mm/1.41inch)..
Satisfactory Service -- We provide you with 7x24 hours online service, you can rest assured to buy our products. If you have any questions about our products, please feel free to contact us, we will provide the best soluti....

Check Stock

Bitray SA8T/K Rod End Bearing 8mm Inside Dia Male Thread Right Hand Self Lubricating Bearing - 4PCS

◎【MATERIAL】 The rod end body is carbon steel, the galvanized environmentally friendly white zinc gasket material is copper inner ring (copper ball) material is bearing steel, quenched, the spherical surface is hard chrome plated, and there are left and right thread..
◎【DIMENSION】Outside Diameter: 24mm.
◎【PACKAGE INCLUDEDS】4 pcs x Rod End Bearing.
◎【WIDELY APPLICATION】Widely used in machinery, power tools,automation equipment, CNC equipment, and so on..
◎【CAUTION WHEN USING】 Where the press is missing or unavailable, the end sleeve joint bearing can be installed with an assembly sleeve and a hammer. The hammering force should be evenly transmitted to the entire circumference of the end surface of the end rod joint bearing ring, so the hammered end surface of the assembly sleeve should be made spherical..

Check Stock

Yuesstloo Ball Joint Separator Tool Kit, Compatible with BMW Benz Land Rover, Tie Rod Ends Remover Tool 22mm 24mm 27mm 31mm 36mm, with Carrying Case & Gloves

...ble with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. Compatible with Mercedes Benz W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Land Rover Audi A4 A6 lower suspension ball joint..
Made of heavy duty carbon steel, with high strength and high hardness, durable to use, not easy to break. The jaw capacity range is adjustable, from 30mm to 56mm, allowing it to be configured for various stud lengths. Add a little oil to the screw before use to make the ball joint easier to eject from the steering knuckle, better protect the thread..
Convenient to transport and store. Comes with a carrying case. All parts are neatly placed in the case. Includes 1pc ball joint remover, 5 sizes of interchangeable forks (22mm, 24mm, 27mm, 31mm, 36mm), 2 screws, and we prepare a pair of gloves for you to wear when using the tool..
100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..

Check Stock

Channellock - 8 Diag. Plier Lap Joint (338CB)

CHANNELOCK's knife and anvil style cutting edge ensures perfect mating and superior cutting edge life.
Laser heat-treated cutting edges last longer.
High-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention.

Check Stock