ReviewsCarbon Steel Mesh

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

Check Stock

VIVOSUN Air Filtration Kit 4 Inch 203 CFM Inline Fan 4 Carbon Filter and 8 Feet of Ducting Combo

ADVANCED MADE EASY: Don’t waste time buying and returning parts that may or may not be compatible or safe to use together! Three-part system....
POWERFUL INLINE FAN: Power: 68W Current: 0.62A Noise Level: 49 dB.
PREMIUM CARBON FILTER: Interior and exterior mesh construction provides 53% open area for free air flow. Item comes fully assembled with easy on/off....
SUPERIOR CARBON QUALITY: 1050+ RC 48 Activated Carbon delivers 100% filtered airflow.
STURDY DUCTING+ 2 Stainless Clamps: Strong, flexible steel wire supports heavy duty triple layer duct walls.PET core is sandwiched in layers of....

Check Stock

2Pack Type M Hog Nail Ring Pliers Kit, Multi-function Cage Clamp Hog Ring Pliers with 1200pcs M Clips for Fence Fastening, Bungee Shock, Cords, Animal Pet Cages, Upholstery Installation, Animal Cages

【Type M Nail Ring Pliers】Type M hog nail ring pliers kit is made of manganese steel alloy, high-frequency quenching, strong and durable. Nail is made of zinc-aluminum alloy which has a low carbon steel surface for anti-rust..
【Easy to Use】Building a Wire Cage with a Type M Nail Ring Pliers Makes Your Work Efficient with the Automatic Nailing Design. Just load the M nails and clip the pliers, quickly assemble large pieces of mesh onto birdcages or rabbit cages or even fences..
【What You Will Get】Package comes with 2 sets of type M nail ring pliers with 1200pcs of hog rings zinc aluminum alloy M type nail which has low carbon steel surface for anti-rust..
【Wide Application】This cage clamp hog ring pliers kit is perfect for auto & furniture upholstery, repairing or installing Pet Cages, Gabion, Wire Mesh, Bird Cage, Rabbit Cage, Poultry cages, Chicken Coops, Quail Cages, Fences, Traps, and so much more..
【100% Money Back Guarantee】If you have any queries about the M-type hog ring pliers, you can feel free to contact us, we will try our best to provide you with 100% satisfaction solutions..

Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

Check Stock

Boston Gear HLSK103YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
Bore has keyway and setscrew for use with keyed shaft.

Check Stock

Boston Gear HLSK103YL Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
Bore has keyway and setscrew for use with keyed shaft.

Check Stock

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188\ Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.

Check Stock

PLUSINNO Fishing Net Fish Landing Net, 8 Inch Fishing Pliers

Warm Prompt: 16"/40 cm Hoop Size 2 section telescopic pole.
Premium Material: High-density carbon fiber mixed with fiberglass pole, durable nylon and strong hexagonal structure mesh, skid-resistant EVA handhold makes the fishing net solid and durable..
Waterproof Nylon Mesh: Non-absorbent coating prevents the net from waterlogging or odor absorption..
【Sturdy and Corrosion Resistant 】- The PLUSINNO fishing pliers are made from Aircraft-Grade anodized 6061 Aluminum with a tough Teflon coating for a great capability of corrosion resistance. Our fish pliers are 60% harder than common aluminum pliers and nearly 4 times the bending strength of common aluminum split ring pliers. The fishing tools is great for long term use without any signs of oxidation and rust..
【Multi-Function Stainless Steel Jaws】-The jaws are 2cr13 stainless steel and coated with titanium. Grab and remove any fish hook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or build a steel leader. Add PLUSINNO fishing pliers to your saltwater fishing gear. Make your hook removal much easier..

Check Stock

PLUSINNO Fishing Net Fish Landing Net, 8 Inch Fishing Pliers

Warm Prompt: 20"/52 cm Hoop Size 3 section telescopic pole..
Premium Material: High-density carbon fiber mixed with fiberglass pole, durable nylon and strong hexagonal structure mesh, skid-resistant EVA handhold makes the fishing net solid and durable..
Waterproof Nylon Mesh: Non-absorbent coating prevents the net from waterlogging or odor absorption..
【Sturdy and Corrosion Resistant 】- The PLUSINNO fishing pliers are made from Aircraft-Grade anodized 6061 Aluminum with a tough Teflon coating for a great capability of corrosion resistance. Our fish pliers are 60% harder than common aluminum pliers and nearly 4 times the bending strength of common aluminum split ring pliers. The fishing tools is great for long term use without any signs of oxidation and rust..
【Multi-Function Stainless Steel Jaws】-The jaws are 2cr13 stainless steel and coated with titanium. Grab and remove any fish hook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or build a steel leader. Add PLUSINNO fishing pliers to your saltwater fishing gear. Make your hook removal much easier..

Check Stock

PLUSINNO Fishing Net Fish Landing Net, 8 Inch Fishing Pliers

Warm Prompt: 16.2"/41cm Hoop Size 3 section telescopic pole.
Premium Material: High-density carbon fiber mixed with fiberglass pole, durable nylon and strong hexagonal structure mesh, skid-resistant EVA handhold makes the fishing net solid and durable..
Waterproof Nylon Mesh: Non-absorbent coating prevents the net from waterlogging or odor absorption..
【Sturdy and Corrosion Resistant 】- The PLUSINNO fishing pliers are made from Aircraft-Grade anodized 6061 Aluminum with a tough Teflon coating for a great capability of corrosion resistance. Our fish pliers are 60% harder than common aluminum pliers and nearly 4 times the bending strength of common aluminum split ring pliers. The fishing tools is great for long term use without any signs of oxidation and rust..
【Multi-Function Stainless Steel Jaws】-The jaws are 2cr13 stainless steel and coated with titanium. Grab and remove any fish hook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or build a steel leader. Add PLUSINNO fishing pliers to your saltwater fishing gear. Make your hook removal much easier..

Check Stock