ReviewsCarbon Steel Pipe Fitting

LitKiwi 2PCS Stainless Steel 304 Beer Keg Coupler Fitting,Beer Line Connector Kit,Hex Nut 5/8'G Thread x 5/16' Barb Fittings,Suit for 5/16' ID Beer Line Hose with Clamps

  • ★【Great Marterial】Both the fitting and clamp were made of 304 High quality stainless steel which has high temperature ductility, low magnetic permeability,and low carbon content for greater resistance to corrosion..
  • ★【General Size】The Thread—5/8"G(BSP),suit for most American beer keg coupler,the 5/16" Barb suit for beer tube which the ID little less than 5/16",it is bigger than the general-purpose models on the market and can support larger traffic..
  • ★【Professional Design】The swivel nut make the installation easier and faster,the elongated Barb part allows the pipe to be installed deeper, and provides clamps to make the pipe fully stable and not easy to fall off..
  • ★【Wide Application】Use for most American beer keg coupler,connect line to shanks and couplers.Also can use for other scenes which need the 5/8"G thread to 5/16"barb fitting..
  • ★【Package Include】2PCS 5/8"G x 5/16" Barb fittings with 2PCS clamps.If you are not fully satisfied with our product, we will serve you whole heartedly..
Check Stock

Jeemiter Castle Nut Removal Wrench for Removal and Tighten Collet Nut Floor Heating Pipes Cars Walnut and Pipe Fitting

  • Fits all commercial and standard Castle nuts with a 1 1/4” OD and plumbing..
  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Powder coated.
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, and hitch.
  • Very easy to hang on you with the O ring end, smart and handy to use with a circle edge bar.
Check Stock

Csst Flexible Gas Tubing 1/2 X 75

  • Saves time - 60% time savings vs. steel pipe fitting.
  • Cleaner and easier to handle than black steel pipe.
  • Bends around corners eliminating need for additional joints and fittings.
  • Use coordinating HOME-FLEX CSST fittings.
  • Great for seismic areas - ridged pipe often leaks after even small tremors.
Check Stock

(All in One) EFIELD 1/2 Inch Pex-b Pipe, Fitting, Clamp Tool, Clamps Cutter Combo Kit

  • Directly from One of the Biggest Pex Systems Manufacturers.
  • Pex Crimp Fitting 1/2" coupling, Elbow, Tee 5 PCS/each -15 PCS.
  • Pex Cinch Clamp Tool with 50 PCS Stainless Steel Cinch Clamps and Steel Made Pipe Cutter.
  • Heavy-Duty Canvas Bag for Carrying and Storage Fitting and Tools.
Check Stock

SUPPLY GIANT OQCM2025-5 Nipple pipe, 2 in. x 2-1/2 in, Black, 5 Pack

  • PIPE NIPPLE TYPE: pipe nipple fitting male NPT (National Pipe Thread) thread made of superior coating steel for commercial use residential application and all your DIY projects. Black coated schedule 40, 150 PSI.
  • PIPE FUNCTION: nipple joins two pipes or extending length.
  • HIGH QUALITY: durable pipe steel material manufactured using advanced technology.
  • RATING APPROVAL: meets ASTM and ANSI standards.
  • DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture shelves and accessories.
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

iCrimp Push-to-Connect,Push-fit Disconnect Clamp Tool for Brass-Push Fittings Removing,Multi-size Combination 1/2",3/4",1"-CRQ02

  • 「VERSATILE TOOL」With one tool allows 1/2”,3/4”,1” Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra interchangeable faceplates required..
  • 「REMOVES IN SECONDS」Simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly..
  • 「DURABILITY」Constructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life..
  • 「ERGONOMIC DESIGN」TPR coated grips prevent slippage in wet conditions and one-handed operation design to allow your free hand the ability to assist in the removal of fittings..
  • 「VERSATILITY」It's compatible with brand Push-fit/Push-to-Connect fittings..
Check Stock

Zurn GT2700-10-2NH - Steel Grease Trap, 10 GPM 2\ with Flow Control

  • ...e interceptor, whose flow rate is about 35 GPM (132.49 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 70 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting：You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place ....
Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

  • ... the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
  • 【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
  • 【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
  • Cushioned for comfort and non-slip security.
  • 【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from during rotation. Sharp, Durable and Long life service time.
Check Stock

Scotte Stainless Steel Reamer Tool 6 Blade Tobacco Pipe Carbon Scraper

  • Tobacco pipe reamer tool,carbon dioxide cleaner/carbon scraper.
  • Adopt import high quality stainless steel, very upscale atmosphere, show aristocratic temperament.
  • Bit pass needle design, can clean pipe, can change part of flue, very practical.
  • Can be fine-tuned to control the thickness of retained carbon pie.
  • Thicken design, material, strong and durable, beautiful and generous, ideal choice.
Check Stock

Brooklyn Pipe Flange - 16 Pack 3/4' Black Floor Flange Cast Iron Pipe Fittings | Our 3/4 Inch Pipe Flange | Industrial Pipe Flanges | Decorative Pipe Fitting Fit for Steampunk Furniture

  • 3/4 INCH FLOOR FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to take your project to the next level. These fittings are for DIY projects only, they are not rated to carry gas nor water..
  • INDUSTRIAL DECOR- Our 3 hole black floor flange is 2.75" inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial, steampunk, vintage, retro, factory look, our flange will fit perfectly into your project..
  • SUPPORT AMERICAN BUSINESS – Brooklyn Pipe is a small business headquartered in New York. We would really appreciate the opportunity to show you what makes Brooklyn Pipe the #1 top rated pipe fitting brand. We always go the extra mile for our awesome customers!.
  • NO CHINA STAMP - Our forged malleable iron flange doesn't have the word "CHINA" stamped into the flange which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market. Our 3 hole flange is just as strong as the competition but simply looks better!.
  • QUALITY CONTROL - We’ve partnered with world class steel factories and hire licensed inspectors to review our Brooklyn Pipe products prior to being packaged. Rest assured you are getting to....
Check Stock