ReviewsCarbon Steel Puller Tool

Gresdent Trim Puller Heavy Duty Pry Bar Home Trim Tile Removal Tool Remodeling Wood Floor Baseboard Molding Nail Pulling and Hex Wrench Tool (Red)

...board by cutting it with a sharp knife, then insert the puller above the baseboard and tap it with a hammer or mallet.
it will slide right behind the baseboard. Gently pull on the tool and the baseboard will pop out of the wall..
【Durable Material】 Made of high quality carbon structural heat-treated steel, it is a very sturdy tool that can withstand repeated whacks and can be used over and over again. The comfortable silicone material can help you hold the handle easily and protect your hand from injury..
【Time & Effort Saving】The larger, flatter contact surface on the puller spreads out the force for more efficient removal, making it possible to do more work with less effort. The 16-degree wedge center facilitates removal of trim and baseboards and preven damage to both trim and walls.p.
【Multifunctional Tool】Not only is it the ultimate removal and remodeling tool, it can also be used as a nail puller and hex wrench for additional help..

Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.

Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.

Check Stock

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.

Check Stock

Orion Motor Tech OMT Gear Puller Set 3 4 6 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit

UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts.
BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3", 4", and 6" and reaches of 4.3", 5", and 7.3" to cover most applications.
3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage.
REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes.
TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.

Check Stock

Mardatt 4Pcs Upholstery and Construction Staple Remover Tack Puller Nail Remover Tools Set W End Cutting Pliers Staple Puller Tack Lifter Fastener Remover for Furniture Floor Wall Car Photo Frame

【Package Information】In nail removal tool set, You will get a 1 pcs 7” end cutting pliers, 1 pcs staple remover, 1 pcs tack lifter, tack puller,....
【Powerful Nail Puller】Made of high carbon steel with quenching treatment, greatly enhance its strength, with excellent rust resistance for long....
【Heavy Duty Staple Puller】Made of premium steel with thin and sharp point, dual rubber non-slip, easy grip handle.
【Practical Upholstery Tack Remover】Manufactured from durable alloy steel with with acetate handle,sturdy strength and durability. Smooth flat....
【Huge Function】This end cutting pliers with nail remover set is suitable for carpenters, handymen, professionals or amateur, designed to cut metal....

Check Stock

AUTOAND GM Harmonic Balancer Remover Puller, Automotive Replacement Engine Harmonic Balancer without Tapped Holes, Crank Pulley Puller Compatible with Ford Coyote 5.0

... harmonic balancer. Tighten the pressure screw to reach the crankshaft, finally use a wrench or a ratchet to turn the compression screw carefully until the harmonic balancer is removed..
[HIGH QUALITY] The harmonic balancer removal tool allows you to complete the work faster and save your time, which is made of high-carbon steel, which is hard and corrosion-resistant, not easy to break, and has a longer service life..

Check Stock

KUNTEC 3 Jaw Inner Bearing Puller Heavy Duty Pilot Sleeve Gear Extractor Internal External Pulling for Motorcycle Wheel Car SUV

【Strong Material】3-Jaw Inner Bearing Puller Tool is constructed from carbon steel, the overall heat treatment, strong and durable. Corrosion-Resistant black oxide finish, preventing damage to bearings..
【Well Equipped】3 Jaw Inner Bearing Puller removes bearings, pump bearings, bushings, removes all sleeve type bearings with 1/2"-2" inside diameter.
【Advantage】The three-jaw design can apply pressure evenly to prevent damage to the bearing and ensure stability during use. There are two installation methods for the claw foot..
【Labor Saving】Structure design, gently turning the small wrench can produce a strong pull force.
【Wide Application】3 Jaw Bearing Puller is designed for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing, generator bearing, machine bearing etc.

Check Stock

X AUTOHAUX 20 Pcs 7mm x 150mm Hot Glue Sticks Auto Body Paintless Dent Removal Repair Black for Car

Professional design - Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor..
Paintless repair - The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint, even the rubber hammer suitable for uneven dents has a good rubber package..
Widely used - Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents..
DIY - Tools coming with detailed repair steps introduction for operate, it makes the dent removal process so easy. Instead of spending hundreds of money in 4s shops, our dent puller tool kit can help you repair your cars by yourself for many times, so it can save a lot of money and time for you..
Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid b....

Check Stock

Colwelt Stand Up Weeder and Weed Puller, Stand Up Weed Puller Tool with Foot Pedal, Step and Twist Manual Weeder 40 Inch(Combo Pack - Stand Up Weeder & Hand Weeder& Garden Gloves)

...d Up Weeder + 14’’ Hand Weed Puller + Garden Gloves. This fantastic manual weeder set gives you the power to take back your lawn without back-breaking labor. It is effective, efficient, and best of all cost-effective!.
DURABLE STRONG-STEEL DESIGN: This stand up weed puller tool is made from durable high strength carbon steel, weather and rust resistant, make sure it is super strong and durable for long years use. The foot pedal is also steel, unlike plastic pedal, is more strong and durable..
SAVES YOUR BACK & KNEES: 40" stand up weeder with long handle, lets you effortlessly uproot the weeds without having to bend over or go down to your knees, eliminates sore knees from kneeling and back ache from bending and stooping. It is really a stand up weed puller tool for grandpa, grandma, father, mother, husband and wife or any one needed..
GET TO THE ROOTS: Long(4inch) and sharp stainless steel prongs can firmly grab weeds and roots from all soil types. The stand up weeder is effective on dandelions, crabgrass, thistle, tap root, crab grass, taproot, plantain, clover, burdock, etc..
EASY TO USE: Just keep you upright, center over weed, simply push prongs into the root system of a weed with your foot, rotate handle 180-degrees, and extract the weed, r....

Check Stock