ReviewsCarbon Steel Round Bar

Diwa Spinning Fishing Reels for Saltwater Freshwater 1000 2000 3000 4000 5000 6000 Series Fishing Spool Left/Right Interchangeable Trout Carp Spinning Reel 10 Ball Bearings Light and Smooth (6000)

  • ...brass gears, all alloy flawless level wind, industry-first stainless steel worm gear, patented metal idle gear, stainless steel shaft and other components for superior durability and corrosion protection..
  • MORE POWERFUL - You will love the stronger, more powerful KastKing Rover round baitcasting reel with a superior carbon fiber drag system. With its newly designed “Cymbal Washer” System, KastKing Rover now offers up to 30LB of smooth drag..
  • SUPER SMOOTH - KastKing Rover reels have premium MaxiDur double shielded stainless steel ball bearings (6 + 1 BBs on Size 40-60, 4 + 1 BBs on 70 - 90) for smooth operation..
  • VERSATILE - KastKing Rover is a perfect conventional reel for trolling, bottom fishing, and other techniques used in freshwater and saltwater (Size 40 – 60 with 2-pin centrifugal brake that is good for casting). The oversized nonslip EVA grips, line out clicker alarm, easy access thumb bar spool release (40-60 sizes) and the classic look are everything you would expect of a round baitcasting fishing reel..
  • FISH INTO THE FUTURE - KastKing Rover conventional reels are built with functionality, quality, and are built to last. KastKing Rover Series deliver fantastic design, power, and performance at an affordable price. Anglers who want an affo....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • ...quipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Jorgensen 6 Spreader/Bar Clamp Set 4-pack,One-Hand Light Duty E-Z Hold Clamp/Spreader 99216A

  • Basic Parameter - Throat Depth : 2-3/8” from bar top of pad.
  • Normal load limit: 150 lbs. Bar: 1/8”*1/2” plated, round-edge, high-carbon steel.
  • Light-duty E-Z hold design - the E-Z hold design allows clamp to be used in two ways - clamp or spreader. Not only can these versatile Clamps can be easily converted into a spreader Clamps, feature our exclusive patented feature that allow two clamps to be joined together to make a clamp with more than double the opening capacity of a single Clamp.
  • One-handed Clamp - as a standard, quick-acting Clamp, the patented and innovative sliding head maintains substantially higher clamping forces up to 300 lbs. The unique in-line advancing handle provides Comfort and ease of the use, permits greater travel per squeeze.
  • Features - these bar clamps combine the speed and ease of single-handed use. With 2-3/8 inch reach and furnished with soft and durable plastic pads.
Check Stock

Alnicov Stainless Steel Guitar Slide Tone Bar for Dobro, Lap Steel Guitar, Hawaiian Guitar, Electric Guitar Accessories - Chrome

  • This is a stainless steel tone bar with finger groove on top and round tip cut on front end..
  • The steel bar is nice and smooth, and the round toe section makes it easier to isolate the strings you're playing and use the slide..
  • The slide bar is 2,992 in long and weighs 4.06 oz..
  • Applicable for playing Dobro, steel lap or Hawaiian steel guitar, electric guitars..
Check Stock

14 inch Pizza Pan with holes 2 pack perforated Pizza Tray Carbon Steel Crisper Pan Non stick Pizza pan for oven 2pcs14inch pizza pan

  • MAKE CRISPY PIZZA AT HOME: The perforated design of the 14 inch round pizza pan can help you make thin-crust pizza easily. The holes will reduce....
  • MADE OF STURDY CARBON STEEL: The round pizza pan w holes are made of 0.8mm carbon steel .The heavy gauge carbon steel of 14 inch pizza pan for oven....
  • Special Non-Sticking Coating: The 14 inch pizza pan has a special black Granite Stone finish.The Non-Sticking Coating is food safe and BPA and PFOA....
  • Jumbo Size Pizza Pan Set:You will get 2pcs 14 inch perforated Pizza Pan ,the size of pizza tray is 14.375diax0.75inch. The interior Size of pizza tray....
  • Everyday Gift: You can make delicious crispy pizza with our large pizza Pan .Our 2 pack Round Pizza pan Set is perfert Gift for Baking lover..
Check Stock

United Abrasives- SAIT BUFFING COMPOUND KIT (QTY: 1), Multi, One Size, 41000

  • Variety pack includes brown, white, red and black bar.
  • Red bar for buffing precious metals like gold, silver, platinum, sterling and other high end metals.
  • Brown bar used for buffing aluminum, brass, copper, wood, plastics, hard rubber and painted surfaces.
  • White bar used for buffing stainless steel, carbon steel, nickel, aluminum and chromium to a high luster and shine.
Check Stock

11.5 x1.57 x0.06 15N20 Steel Flat Stock Bar Hi Contrast Blade Billets Blanks Annealed High Carbon Steel Barstock for Professional Hobbyist Use Making Forging Carbon Damascus Knives DIY 2 Pieces

  • Adequate Quantity: you will receive 2 pieces of 15N20 steel bar stock, the ideal tool steel chosen by the tool manufacturer, sufficient quantity to meet your daily use and replacement needs.
  • Suitable Size: the length of 15N20 steel flat stock is 11.5 inches/ 29.3 cm, width is 1.57 inches/ 4 cm, thickness is 0.06 inch/ 0.15 cm, the right size for you to build your own knife, to provide you with long service.
  • Alloy Content: bar stock for knife making is an alloy of iron with 0.75 percent carbon, 0.3 percent silicon, 0.4 percent manganese, 0.02 percent phosphorus, 0.02 percent sulfur, 0.01 percent chromium, 0.01 percent ni and 0.01 percent vanadium.
  • Quality Steel Plate: 15N20 is a bright, acid resistant, wear resistant metal, usually applied with high carbon steel forging, durable, can be applied with confidence.
  • 15N20 is applied with other high carbon steel such as 1095 to forge Damascus knife.
  • If it is etched with ferric chloride and no obvious light is found, it may be a problem with the last step of polishing.
  • Widely Applicable: high carbon steel has nice toughness and grinding degree, which makes it ideal for a variety of handmade DIY blades, knives, hand tools, shims, and more.
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • ...ess takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle of the frosted sense of control more to let you handle any product details with ease..
  • 【LONG SERVICE LIFE】 - Weighing 1.15 pounds of solid aluminum bar handle,high-density tungsten carbide cutting head,high-speed steel blade material,such carbide lathe tools suitable for all levels of woodturners,woodworkers and DIY p....
Check Stock

The Wok Cookbook: 130+ Fast and Easy Delicious Stir-Fry Recipes for your Wok or Skillet. Bonus: 2023 Trending Recipes

  • Round Bottom Heavy 14 Inch 15 gauge (1.8mm) carbon steel wok, commercial grade. Original design by Craft Wok since 2014, proven quality over the years. Traditional chinese wok pan with round bottom..
  • Not suitable for flat electric or flat induction stove. Carbon steel wok may rust. Do not forget to season it before use! Instructions for easy seasoning are included with the wok. Our customer service is ready to guide through the process whenever you need it..
  • Hand hammered by Chinese professionals in Guangzhou. This wok is the proven choice of many professional Chinese chefs. Wok weight: 4.6 pounds (2.1 kg). Heavy and sturdy..
  • Steel helper handle will not burn when you stir fry over high heat, also helpful for hanging the wok for storage. Wooden handle has special hygroscopic not slippery surface for tight grip when you stir-fry..
  • Craft Wok - Love Wok! We are a team of professionals drawn together by our passion for the carbon steel wok. Our mission is to bring you as much pleasure from Stir-frying in a wok, as chefs get in restaurants across China. To do this, we have found the bes....
Check Stock

Craft Wok Traditional Hand Hammered Carbon Steel Pow Wok with Wooden and Steel Helper Handle (14 Inch, Round Bottom) / 731W88

  • Round Bottom Heavy 14 Inch 15 gauge (1.8mm) carbon steel wok, commercial grade. Original design by Craft Wok since 2014, proven quality over the years. Traditional chinese wok pan with round bottom..
  • Not suitable for flat electric or flat induction stove. Carbon steel wok may rust. Do not forget to season it before use! Instructions for easy seasoning are included with the wok. Our customer service is ready to guide through the process whenever you need it..
  • Hand hammered by Chinese professionals in Guangzhou. This wok is the proven choice of many professional Chinese chefs. Wok weight: 4.6 pounds (2.1 kg). Heavy and sturdy..
  • Steel helper handle will not burn when you stir fry over high heat, also helpful for hanging the wok for storage. Wooden handle has special hygroscopic not slippery surface for tight grip when you stir-fry..
  • Craft Wok - Love Wok! We are a team of professionals drawn together by our passion for the carbon steel wok. Our mission is to bring you as much pleasure from Stir-frying in a wok, as chefs get in restaurants across China. To do this, we have found the best manufacturers in China. Our range of branded products is 100% authentic traditional carbon steel woks, 7 years on market..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • ...ston will return to its original position..
  • Product 2: Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3-5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc..
  • Product 2: Pure Copper Coil Motor: 1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption..
  • Product 2: High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability..
  • Product 2: Adjustable Bolt Design: An adjustable bolt on the portable rebar cutter achieves manual-like precision and ensures cutting stability when cutting rebar of various sizes. You only need to put the steel bar in the cut and adjust the bolt to fix it. Once set, all lengths will be uni....
Check Stock