ReviewsCarbon Steel Straight Tee

Monibloom 6 Wheels Stair Climbing Hand Truck, 441 Capacity Heavy-Duty Collapsible Luggage Dolly Cart w/ Handles, Black/Red

  • Hardly Deformed High-Carbon Iron Frame - The solid frame on this folding hand truck is constructed from high carbon steel..
  • Up and Down Stairs Directly by Climbing Wheels - Six 6.3" solid rubber wheels are attached by a high carbon steel frame.Reduce vibration to you and equipment, reduce shock to the users arms from impacts.Resistant to damage, remain functioning efficiently for longer..
  • Ergonomic Hand Grip Prevents Back Injury - Ideal for optimum balance, and is also good for stairs, as well as navigating tight corners and spaces.Non-slip handles make you easily control the hand trolly..
  • 441 lbs Load Capacity Meets Most of Personal and Bussiness Usage. - The standard frame is a straight back design with supportive high carbon steel cross braces. Allows you to easily lift and move tall and up to 441 lbs items.adapt to a variety of usage scenarios, providing maximum stability while in use..
  • Extra Large Area Nose Plate Carry More Cargo - The wider non-slip nose plate allows you to transport more cargo at one time, greatly improving work efficiency..
Check Stock

No sawtooth Black 8-Piece Steak Knife Set Dishwasher Safe Steak Knife Set Stainless Steel Kitchen Steak Knife Set Sharp - Scratch Resistant

  • Premium Stainless Steel - Stainless steel steak knife set set set Imported high-carbon German stainless steel, hand-sharpened to 16-18 degrees per....
  • Ultra-Sharp Blade - Sharp steak knife set set straight edge blade is non serrated, professionally sharp blades can cut through anything in your....
  • Ergonomically Handle - Ergonomically handle steak knives set set is full bolster and heavy weighted with good balance and well control, making you....
  • Usage and Care - High carbon stainless steel steak knife set set with exceptional corrosion resistance and oxidation resistance. Carefully wash with....
Check Stock

10 Pack Black Flat Mending Plate 5×1⅞×⅛ inches Straight Braces Steel Heavy Duty Mending Joining Plates Repair Fixing Bracket Connector with Screw

  • 10 pack straight brace, made of Carbon Steel Q345, surface black sandblasting..
  • Size of flat mending plate: 5x1⅞ inches, thickness: ⅛ inches. Screw hole diameter: Φ5mm..
  • Included 201 stainless steel screw, each repair joining plate with 6 hole, countersink screw holes design..
  • The straight steel brace can used in a variety of furniture and hardware accessories, perfect for fastening chair, table, window, furniture, dresser, shelf, drawer, etc..
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

(10 Pack) PGN - 608-2RS Sealed Ball Bearing - 8x22x7 - Lubricated - Chrome Steel

  • Strong Carbon Steel… Pull your slingshot, take aim, and let our steel slingshot ammo fly straight into your target. These rounds are made out of carbon steel for a stronger impact, a greater feel in your hand, and longer flight distance..
  • Hit It Hard and Hit It Right… Put on your hunting hat and get ready for some serious firepower. These serious slingers are designed for increased precision and higher hitting power – so you can take down your target with ease with maximum impact..
  • Shoot Like A Pro… Be a slingshot pro with our top-of-the-line ammo! Whether you’re just starting out or you’re a seasoned professional, our beautiful pocket slingshot ammo will take your shooting skills to the next level with its straight projection and smooth construction..
  • Smooth & Beautiful Ammo… Take on some ammo that you can trust! We have what you need to get your game on - perfect rounds with no defects, flats, pits, soft spots, or cuts. So go ahead, grab some of our slingshot ammo and shoot with confidence..
  • Proudly Based in the USA… With our practice slingshot ammo, you’ll be able to take on anything that comes your way! Our South Florida based company ensures top quality and superior performance of our premium rounds. Whether you’re looking to tak....
Check Stock

Chipping Hammer/Brush Combo Set - 3-Piece Set

  • Straight bladed chipping hammer with spring steel handle reduces impact vibration when removing slag.
  • Carbon steel shoe handled brush used for general material cleaning.
  • Small stainless steel brush for general purpose cleaning and cleaning aluminum prior to welding.
  • Not related to WELBILT products of Enodis companies.
Check Stock

Malco MD12 Duckbill Snip, 12"

  • 12-Inch long tool with high-carbon cutting blades.
  • Full 3.5-inch (89 mm) blades cut straight and wide curves.
  • Excellent for 24 gauge steel and 28 gauge stainless steel.
  • Easily cuts tin, copper, aluminum, soft metals and vinyl.
  • All steel construction for long life and durability.
Check Stock

FELCO FELCO322 Model 322 Snips, Red

  • Carbon steel blades with chromium coating to prevent corrosion and make blade crossing smoother.
  • Straight blades with rounded ends for precise cuts without damaging the fruit.
  • Polyurethane shock absorbers to reduce muscle tension.
  • Stainless steel pin spring for smooth movement, which reduces muscle tension + Pressed blackened steel handles for optimum durability.
Check Stock

NT Cutter Straight Blades for Leather Knife, 3-Blade, 1 Pack (BKT-300P)

  • Straight blades for leather knife (KT-2000GP).
  • Good for cutting, splitting, skiving, carving leather, etc..
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock