ReviewsCard Module

NGFF(M.2) to USB 3.0 Adapter with Dual Nano SIM Card Slot for 3G/4G/5G Module

1.Install the driver to find the module supplier you purchased. If you don’t have the module and SIM card, you will not be able to use the driver.
2.USB 3.0 type A male to desktop or notebook PC,Supports USB 3.0 interface of M.2 Cards (Socket 2 SSIC-base WWAN) such as 2G GSM, GPRS, 3G,CDMA, WLAN,WWLAN, HSPA MODEM , GPS, 4G WiMAX, LTE, 5G Mini Card to desktop PC.
3.Supports system bus interface: USB 3.0.
4.Supports dual NANO SIM card Push connector.
5.Supports 3042/3052 type M.2 key B Card dimension.

Check Stock

LCD Touch Panels Touchpanel Analog For DOGXL160 (EA TOUCH160-1)

♛ The Display Module is 5V compatible, use with 3.3V or 5V logic.
♛ The Display Module can support analog S P I and hardware S P I.
♛ The Display Module is designed with one socket for sd card.
♛ With P C B plate (including power supply IC, SD), compatible with 5110 interface.
♛ This is a new 2.8 inch serial S P I color display module without touch function.

Check Stock

OTC Genisys 3688 Scope Module with InfoTech 2006

Genisys scope module with Infotech 2006 drivability software kit.
includes the Genisys 4-channel lab scope module with four DMM leads ground lead kV conventional ignition lead GM HEI ignition adapter ignition sync lead manual.
InfoTech 2006 repair information software Smart Card and carrying case.
Important mote system 3.0 or newer 1 GB card required to install.
View multiple sensor waveforms simultaneously to reduce diagnostic time.

Check Stock

TFD Supplies Wholesale Bulk Earbuds Headphones 50 Pack for iPhone, Android, MP3 Player - Black

With high quality, onboard 2W single channel power amplifier..
4 buttons on the board for setting operation..
Support MP3 format, playing power on automatically, LED indocator light when module is working..
Mp3 lossless decoders power amplifier Mp3 player module Mp3 decoder board support TF card and USB..
Support TF Card (mobile phone memory card), U disk playback mode With the speaker terminals without welding..

Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.

Check Stock

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.

Check Stock

HiLetgo TF Card U Disk Play MP3 Decoder Player Module with Audio Amplifier Audio Decoding Player Module Micro USB 5V Power Supply

With high quality, onboard 2W single channel power amplifier..
4 buttons on the board for setting operation..
Support MP3 format, playing power on automatically, LED indocator light when module is working..
Mp3 lossless decoders power amplifier Mp3 player module Mp3 decoder board support TF card and USB..
Support TF Card (mobile phone memory card), U disk playback mode With the speaker terminals without welding..

Check Stock

XISAOK UART Serial MP3 Music Player Module with Speaker Monaural Amplifier Board for Arduino MP3 Music Player Module

㊥ Our product design is unique, not only beautiful but also practical..
㊥ The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip. It can support 8k Hz ~ 48k Hz sampling frequency....
㊥ There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending....
㊥ UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible....
㊥ Our Brand is dedicated to provide high standard products，we have confidence in our products and provide after sale support,if you have products....

Check Stock

AOICRIE 4pcs Dfplayer Mini MP3 Player Module Compatible with R3 for Voice Module DIY DFPlayer Mini Voice Decode Board Support TF Card and U Disk IO/Serial Port/AD for arduino DIY Kit

The DFPlayer Mini is a small and low cost MP3 module player with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an or any other with RX/TX capabilities..
The DFPlayer perfectly integrates hard decoding module, through a simple serial port, which supports common audio formats , you can play the designated music without any other tedious underlying operations. The module perfectly integrated hardware decode MP3, WAV, WMA..
SPECIFICATION Supported sampling rates (kHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48 , 24-bit DAC output, support dynamic range: 90dB, SNR support: 85dB..
The software supports TF card driver, maximum support 32G of the TF card.
IO control mode, serial mode, AD key control mode are available to choose. A variety of applications such as Vehicle navigation voice, multichannel voice alarm, automatic alarm for equipment failure, timed broadcasting.radio spots language function, you can pause the background music being played. Advertising finished playing background sound continues to play back..

Check Stock

Icstation DIY Light Sensor Sound Module, Micro USB Recordable Sound Chip 8M Memory Speaker Talking Programmable Music Player Box for Birthday Greeting Card Valentine's Day Creative Gift

【DIY Greeting Card】With a 0.5W speaker and 3.7V cell batteries, the sound module is ideal for DIY talking greeting cards, music boxes, Christmas gifts, and other creative gifts..
【Light sensor control】When detecting the light, the module will automatically play the music， it will stop if it is not exposed to light in the middle..
【8M Memory】You can update the music with the attached USB data cable. It is recognized by computers as a USB drive, just like an MP3 player with an 8M limit. It's easy to add your favorite MP3 audio files to the internal storage..
【Rechargeable Music Module】The button batteries are rechargeable via the micro USB which can be charged by connecting a computer or a charger with a data cable. The volume is also adjustable..
【Self-adhesive】Self-adhesive on the back of the sound module makes it easy to paste on the gift/card/box. Turn off the switch during installation to avoid power consumption..

Check Stock

5PCS 0.96 Inch OLED Display Module, PEMENOL 28 x 64 Pixel I2C IIC Serial 1 OLED LCD Display Module with SSD1306 Driver for Arduino Raspberry Pi and ESP8266（White Light）

This is a new 2.8 inch serial SPI color display module with touch function.
Designed with one socket for memory card.
With PCB plate (including power supply IC, Memory Card), compatible with 5110 interface.
5V compatible, use with 3.3V or 5V logic.

Check Stock