ReviewsCarver s Vises

5 Pieces 5/8 Inch Wood Carving Chain Disc 4 Inch 22 Teeth Saw Blade Grinder Wood Carving Disc for 4 Inch/ 4-1/2 Inch Angle Grinder Grinding Shaping Attachment Circular Chainsaw Wheel

  • This Wood Carving Chainsaw Carving t shirt is the perfect wood carving tshirt for woodworking lover. Perfect present for Wood Carver, wood carving gifts. Wood Carving Chainsaw Gifts.
  • Great wood carving gift for Wood Carver. People who love chainsaw carving, funny wood worker, wood worker clothing are sure to love this wood carving shirt, gift ideas for Wood Carver.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Downhill Skateboard Heroic

  • Commuter, cruiser, carver, downhill longboard. Length: 42" X 9.6" Wide, Wheelbase 31.50".
  • 10" Gullwing Chargers with 74mm 78A Sector 9 top shelf wheels with PDP Abec 5 bearings.
  • 5 ply vertically laminated Taco Mold Bamboo with dropthrough trucks.
  • Beautiful green Hawaii wave graphic on the bottom and clear grip tape on deck.
  • All original Sector 9 Components as it comes from the factory. Board rides solid and great cruiser or carver.
Check Stock

Full Figure Girl

  • Finn-Carver, Mary (Director) - Siladi, James G. (Author).
Check Stock

1729

  • Exclusive Double-D edge The Double-D edge provides a clean, smooth cut every time and stays sharp longer than straight-edge knives. Can be factory....
  • Full tang Blade extends full length of the handle for extra strength and balance..
  • Ergonomic handle Universal fit for large or small, left or right hands. Thumb and forefinger lock into place for safety and control. Fatigue-resistant....
  • CUTCO's 6-3/4" Petite Carver is suited for smaller cuts of meat, like a rolled roast or London broil..
  • Guaranteed Forever Like all CUTCO products, the 6-3/4" Petite Carver is guaranteed forever..
Check Stock

4 Pcs Anchor Wire Vise Anchor Vise Grape Trellis 9 Gauge Metal Wire Galvanized Solid Wire for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Sufficient Quantity: our anchor clamp set includes 4 pieces anchor wire vises and 1 bundle of galvanized iron wire, the vises are suitable for 8 to 11 gauge wires, they are enough to meet your work and replacement needs.
  • Reliable Material: these anchor cable vises are made of aluminum, and the iron wire with galvanized technology has long term applicability.
  • The anchor cable vise can effectively avoid the iron wire from slipping out, so you can use it with confidence.
  • Size Information: the size of our wire cutters is about 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, they are suitable for 8 to 11 gauge wire, each wire vise is about 30 grams, the specification of iron wire is 9 gauge, each roll is 32.81 feet in length, the matching combinations are convenient for you to buy.
  • Wire Selection: it is recommended to use our galvanized metal wire, do not use wires with other coatings, in order to use wire cutters correctly, please pay attention and follow our suggestions.
  • Applicable Scenarios: our vise and bendable wire can be applied to build vineyards, fences, trees and so on, they can probably provide a nice using experience for your garden work.
Check Stock

On Board Recording of Downhill Skier

  • Commuter, cruiser, carver, downhill longboard. Length: 42" X 9.6" Wide, Wheelbase 31.50".
  • 10" Gullwing Chargers with 74mm 78A Sector 9 top shelf wheels with PDP Abec 5 bearings.
  • 5 ply vertically laminated Taco Mold Bamboo with dropthrough trucks.
  • Beautiful green Hawaii wave graphic on the bottom and clear grip tape on deck.
  • All original Sector 9 Components as it comes from the factory. Board rides solid and great cruiser or carver.
Check Stock

Heater Element 208V 1275W 285-600000-839

  • 1.You can gain quickly high heat to the wax carver and it is safe and efficient to use..
  • 2.When you work for waxing up, this equipment is very suitble to replace Bunsen burners, Alcohol or Gas Burners..
  • 3.Energy efficient operation due to advanced ectronic sensor..
  • 4.It is clean to use due to the cap which can be replaced..
  • 5.For your safety, Error is appeared and protect the circuits when a carver is inserted in the hole forvery long time..
Check Stock

Loaded Boards Bhangra V2 Bamboo Longboard Skateboard Deck (Flex 2)

  • Commuter, cruiser, carver, downhill longboard. Length: 42" X 9.6" Wide, Wheelbase 31.50".
  • 10" Gullwing Chargers with 74mm 78A Sector 9 top shelf wheels with PDP Abec 5 bearings.
  • 5 ply vertically laminated Taco Mold Bamboo with dropthrough trucks.
  • Beautiful green Hawaii wave graphic on the bottom and clear grip tape on deck.
  • All original Sector 9 Components as it comes from the factory. Board rides solid and great cruiser or carver.
Check Stock

Yost Vises 445 Combination Vise | 4.5 Inch Jaw Width Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Cast Iron and Steel U Channel Bar

  • COMBINATION VISE: The Yost Vises 445 4.5-inch utility combination pipe and bench vise is made from a 30,000 PSI cast grey iron with steel U channel bar. Equipped with a large anvil work surface. Also has as a replaceable hardened steel serrated top jaws and a large pipe capacity permanent serrated pipe jaw..
  • TECHNICAL SPECS: Jaw Width 4.5" (11.43 cm), Jaw Opening 4" (10.16 cm), Throat Depth 2.625" (6.6675 cm), Min Pipe Capacity .125" (0.3175 cm), Max Pipe Capacity 2" (5.08 cm)..
  • SWIVEL BASE: 360-degree rotatable swivel base with 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime te....
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock