ReviewsCase With Power Supply

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • 【Built in 2000W Power Supply】 Built in 2000W power supply with 10 long power leads. No need to purchase adapter cables, connect to motherboard and GPUs directly. Load decibels: about 68-70DB. It can be used at 176-264V voltage. （Can not be used at household voltage of 110V） The number of revolutions is as high as 7000 rpm per minute so the heat dissipation effect is good. The power efficiency is about 90%. Please reserve about 300W for the motherboard, fan, and other wire consumption..
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is 2000W, and the output power=2000*90%. So we recommend to run 8 PCS 3070/6800/6800XT 6900/6900XT GPUs simultaneously, run max 5 PCS 3090, run max 6PCS 3080 without overclocking. Note: GPUs longer than 32 cm in length are unavailable. We don’t recommended to mix various types of GPUs..
  • 【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurr....
Check Stock

Fancasee (4-Pack) 4 Pin PWM Fan Power Supply Cable PC Internal Motherboard Fan Power Extension Cable Adapter Cord Wire for Computer ATX Case 4-Pin / 3-Pin Cooling Fans Cable (10.5 inch)

  • Excellent 4 pin PWM fan power supply extension cable for PC computer atx case internal motherboard fans, make you easier diy PC computer case..
  • Widely Compatible: support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
  • Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • Plug-n-Play, easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans..
  • Package contents: 4 pack black 10.5 inch fan power supply extension cables, male to female connector plug..
Check Stock

Sinreton 736pcs PC Computer Standoffs Screws Assortment Kit for 2.5\ SSD, Hard Drive, Computer Case, Motherboard, Fan, Power Graphics

  • [10 different size screws]: use for 2.5" SSD, hard drive,computer case, power supply, motherboard, hard drives, fan and floppy,CD-ROM drives.
  • [Style]:hard driver screws(M3.5x5mm),hand twist case screw,Main board fixed screws (M3 x 5),CD-ROM set screws (M3 x 4),fan screws(M5x10),case screws screw (M3.5 x 6),M3 washers,2.5" M3 ssd screws.
  • [Material]: Made of high quality black zinc plated which have superior rust resistance and excellent oxidation resistance.
  • [Application]:Perfect for 2.5" SSD, Hard Drive, computer case, power supply, Mainboard/motherboard, fan and floppy/CD-ROM/DVD-ROM drives.
  • [Total]: 736pcs computer screws with a storage box.great for PC building hobbyist.
Check Stock

Charging Case Compatible with Apple Pencil 2nd Generation Only, Magnetic Charging Stand for Ipad Pen 2nd Gen with USB Cable, LED Indicator Light, Anti-Silp Base (White)

  • ...ti-fingerprint process. The bottom of the charging stand is made of anti-slip silicone. No need worry about the charging case moving easily and lost..
  • 【Come With Leather Pencil Case & Type-C Cable】The Apple Pencil 2nd Generation Charging Case support multiple power supply methods. Power supply through type-c port, such as charger, power bank, computer, laptop etc..
Check Stock

10000mAh Power Bank Battery Charger Case for Google Pixel 7, Rechargeable Battery Pack Charger Magnetic Case for Google Pixel7 Extended Backup Charging Case

  • (Pixel 7)Battery Case Only Fit For Google Pixel 7 ,NOTICE : NOT compatible with other Pixel Model.
  • 10000mAh Pixel 7 Battery Case type: lithium-ion polymer battery -Material: High Quality TPU+Plastic,Rechargeable Battery Pack Charger Magnetic Case.
  • Pixel 7 Power case Split design, Two-in-one design of power supply and mobile phone case, The phone case can be used alone,battery case is ultra slim design,Detachable design with magnetic suction function, easy to carry,easy to install. Elastic soft material and full edge design.
  • Pixel 7 Charging Battery Case,button for 3 seconds to start or stop charging，LED POWER INDICATOR 4 LED battery level indicator show you exactly how much power you have (25%-50%-75%-100%)..
  • [Style]:Pixel 7 Phone Case Deluxe Fashion Cool Modern shockproof Power Back Cover Multifunctional Magnetic Phone Case scratches shock fingerprint and other daily wears and tear..
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • 【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....
Check Stock

Miuzei Raspberry Pi 3 B+ Case with Fan Cooling, Pi 3B Case with 3 Pcs Heat-Sinks, 5V 3A Power Supply for Raspberry Pi 3 B+ (B Plus), 3B (No Raspberry Pi Board)

  • NEW DESIGN FOR RASPBERRY PI 3 B - Miuzei Clear Acrylic Raspberry Pi 3 B Case is Specially designed for Raspberry pi 3 B / 3 B+, and perfect compatible with Raspberry Pi 3 B / 3 B+ / 2B. Assembly easy for beginners and children..
  • KEEP RASPBERRY PI 3 B+ COOLING - New Raspberry pi 3 B case with a Silence DC 5V cooling fan and 3 pcs Aluminum heatsinks, double cooling system keep your Raspberry pi 3 B+ cool quickly even the CPU under high load..
  • EASY TO ACCESS ALL PORTS - Miuzei Raspberry pi 3 model B case can perfect access all ports including the micro HDMI, Audio/Video, USB and Ethernet Ports, Micro USB Power Connector and Micro SD Card..
  • ETL LISTED 2.5A Micro USB POWER SUPPLY - Raspberry Pi 3 B case With a 59 inch 5V 2.5A power supply which has an ON/OFF switch, easy to power on/off your Raspberry pi 3 b+ / 3 b / 2 b. No need to worry about overvoltage or overcurrent.
  • 18-MONTH FREE RETURN AND EXCHANGE - Miuzei support lifetime technical support and free return and exchange service for each customers..
Check Stock

One Tattoo World Dual Tattoo Machine Power Supply | Digital LCD Display | Stainless Steel Pedal & 2 Clip Cords | Black

  • POWER SUPPLY FOR TATTOO MACHINES: This power supply unit comes complete with 1 power cord, 1 pedal and 2 clip cords. The LCD display reads out the voltage as the machine runs and has a programmable preset function. This power supply box works with rotary tattoo machines, tattoo guns, and other types of machines. This unit comes with all the parts you need to get down to tattooing..
  • PROFESSIONAL-QUALITY TATTOO SUPPLIES: All our tattooing tools are made with quality materials. We pride ourselves on creating professional-grade tattoo supplies for a fraction of the cost. With the help of this high-quality power supply machine, you can create the tattoo you've always wanted from the comfort of your home. Our supplies also work well in a professional tattoo establishment..
  • LINER AND SHADER PRESETS: This dual power supply unit allows the tattoo artist to easily switch from a liner to a shader machine, streamlining the permanent-tattoo process and providing effortless results. The 2 and 4 machine memory modes allow you to seamlessly switch from one machine to another, and the non-volatile memory saves your settings in case of a power outage..
  • LCD DISPLAY VOLTAGE METER: The digital, ultra-bright LED screen makes it incredibly easy to read the voltage and also di....
Check Stock

GeeekPi Raspberry Pi 4 8GB Starter Kit - 64GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 18W 5V 3.6A Power Supply with ON / Off Switch, HDMI Cable for Raspberry Pi 4B (8GB RAM)

  • Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM), For 4GB version, please refer to ASIN: B0B3M2HKN6.
  • For 2GB version, please refer to ASIN: B0B7DFF7TY.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • Power supply with Professional Certification: TUV, RoHS Certification.
  • 64GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (8GB RAM).
  • 1x 64GB SD Card (with Card Reader and Adapter).
Check Stock

Directv 10 Pin To Component Dongle Cable For H25 And C31 Receivers (10pincompon)

  • Converts any standard ATX power supply to work with your 10-Pin motherboard.
  • 24-Pin port connects to ATX Power Supply, 10-Pin port connects to motherboard.
  • Material: 1007-18AWG, braided Sleeves for easy cable management. Length: 30cm, 12in, 18AWG.
  • NOTE: Some power supplies will still be on even when computer is shut down. In this case, you would need to turn off using the main power switch (back of your computer)..
Check Stock

Computer PC Power Supply Tester 20/24 4/6/8 PIN for ATX, ITX, BTX, PCI-E, SATA, HDD, IDE with Aluminum Alloy Enclosure 1.8' LCD ATX Power Supply Tester

  • 【ATX Power Supply Tester】SAMFINTON computer power supply tester support 20-pin / 24-pin / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors..
  • 【Aluminum Alloy Enclosure】Nice thermal conductivity & corrosion Resistance,with a high  strength housing. The computer power tester is more durable than the plastic case on the market..
  • 【Practical PC Power Tester】The 1.8inch LCD display intuitive and accurate display outputted Voltages (+/-0.01V), automatic fault alarm..
  • 【Normal】Turn on the power supply, will hear “DiDi” ring, If all groups of data are not flashing, the power supply output voltage is normal..
  • 【Faulty】If a certain voltage signal is not detected, or the detected voltage value exceeds the normal value, a long “beep” buzzer will be emitted.
  • if the corresponding voltage value or PG also flashes, it indicates a fault..
Check Stock